The next evolution in woodworking is here–the versatile GRR-RIP Block Smart Hook Push block. With its popular Green GRR-RIP® non-slip material and smart Gravity Heel technology, GRR-RIP Block increases safety while rewarding you with complete confidence and control over your work piece. GRR-RIP Block’s cutting edge technology increases safety and stability when working with jointers, band saws, router tables, shapes and table saws.

Additional Information:

• Production Capacity: trading
• Delivery Time: 1 week
• Packaging Details: Rs1260/8Oz, Rs1640/16Oz, Rs2259/1Quart, 1USG

Additional Information:

• Production Capacity: Trading
• Delivery Time: 1 week
• Packaging Details: Rs1410/8Oz, Rs2099/16Oz, Rs3190/Quart

A very useful section of aluminium T-Track which can be utilised for all manner of routing jigs, clamps and devices. 

The GRR-Ripper is a unique precision guidance and stock control system designed to feed your wood through your table saw blade with far more safety and accuracy than could ever be possible with bare hands and conventional push blocks. With the GRR-Ripper's 3-directional control, you can safely exert downward, forward, and lateral pressure on the stock for maximum control and safety. You will enjoy improved accuracy, less wasted materials and a new ease in completing projects. 

Additional Information:

• Item Code: Rockler43662
• Production Capacity: Trading
• Delivery Time: 2 weeks

Make dowels to perfectly match a project or from a specific species of timber. The Veritas dowel cutter and a few timber off-cuts will do the job. The carbon-steel blade in the plated zinc alloy body is adjustable. They work equally well in soft, green or hard woods. The curved blade is relatively easy to sharpen when required. Hand held like a pencil sharpener, they put accurate tenons on the tips of turnings or rustic furniture components. Alternatively using a cordless drill, you need only cut square stock slightly oversize (1.5mm is ample). Use one of the Veritas 1/2" drive sockets for the 3/8" and 7/16" cutters or a 5/8" drive for the 1/2"cutter)

Glue Line Centering Attachment

• When gluing up panels, simply rotate the bottle to center the glue tip on the edge of the lumber no more wavy lines
• Attachment friction fits onto the Standard Glue Spout
• Maximum lumber thickness: 1-1/8''
• Delrin guide bars

Silicone Glue Brush Applicator

• Our famous easy-to-clean, reusable glue brush without the need to dip just squeeze the bottle gently to load the brush
• Silicone bristles are easy to wash with water, and quickly shed dried glue for long-lasting service
• Dried glue peels off easily to restore the brush to pristine condition
• Unlike traditional brushes, the silicone brush won't shed bristles into your bead of glue
• Threads compatible with Titebond 16 and 32 oz bottles

Glue Roller Applicator

• Glue Roller body and axle are made of polypropylene plastic, and roller is made of thermoplastic rubber all easy-to-clean
• Large, elongated tip hole for good flow
• Ergonomically designed with angled head
• Tip is easily visible so you can gauge your glue flow visually
• Thread is compatible with Titebond 16 and 32 oz bottles

Mortise Glue Applicator

• Flattened design fits into traditional mortises, Domino mortises, biscuit slots and other grooves that traditional spouts can't reach into
• Thread is compatible with Titebond 16 and 32 oz bottles

Glue Funnel

• Threads onto your glue bottle to make transferring glue from jug to bottle drip-free
• Thread is compatible with Titebond 16 and 32 oz bottles

Cleaning Brush

• Narrow profile and flexible wire handle make it easy to reach into the tight spaces of the mortise tip and roller
• Double-ended with two brush types: stiff bristles and soft bristles

Note: Not for use with CA glue.

Additional Information:

• Item Code: 57361
• Production Capacity: trading
• Delivery Time: 1 week

Carbide is the name of a sintered metal (tungsten) - an extremely hard metal having approx. 98% of the hardness of an industrial diamond. The abrasive consists of grains of carbide of a particular size depending on the purpose which are welded onto a steel base. These small metallic grains are the abrasive medium, making carbide extremely durable compared to sandpaper. Disc are provided with velcro backing for various power tools as orbital sander/ Delta sander. Carbide sanding and grinding tools lasts up to 150 times longer Carbide coating’s sharpness and other unique properties prevent material from building up on the sanding and grinding tools. The tools can be used for industrial purposes, as well as for fine finishing jobs. If material build-up does occur, it is easily removed using a metal brush or a cleaning solvent. Carbide/tungsten coated sanding tools are extremely long-lasting, and can be used for sanding and the surface treatment of a wide range of materials. Carbide's long life and effective sanding qualities saves time and improve results.

Disc are available in following sizes and GRIT;

• 90 mm with 7 Holes in GRIT - 24-36-60-80-120-180-240
• 125 mm with 8 Holes in GRIT - 24-36-60-80-120-180-240
• 125 mm with 9 Holes in GRIT - 24-36-60-80-120-180-240
• 125 mm without holes in GRIT - 24-36-60-80-120
• 150 mm with 6 Holes in GRIT - 24-36-60-80-120-180-240
• 150 mm with 9 Holes in GRIT - 24-36-60-80-120-180-240
• 150 mm without holes in GRIT - 24-36-60-80-120

Tungsten carbide Disc can be used on a variety of material as under-Wet or Dry

• Paint
• Wood
• Cement
• Plaster
• Brick
• Paint And Rust On Ships
• Linoleum
• Filler
• Acrylic
• Fibre Glass
• Carpet Backing
• Pvc
• Concrete
• Epoxy
• Marble
• Carpet Felt

Additional Information:

• Production Capacity: Trading
• Delivery Time: 1 week

The diamond ground teeth are so unbelievably sharp that the blades work extremely well in all wood giving an exceptionally high quality finish and clean cut, plus they stay sharp for at least 30% longer than normal, milled tooth blades. Made of a unique steel ideally suited to the rigours of running on two wheels, the annealed and highly finished weld provides the perfect blade for any of the machines in the Axminster programme with blade lengths of 1,854mm or 73 and above.

• Unique diamond ground tooth gives an exceptionally clean cut
• Consistently cuts straighter, has sharper, longer-life teeth
• Has a excellent performance in both rip and cross cuts
• Axminster is one of the few companies worldwide able to offer a fully guaranteed weld
• The weld is annealed to remove any brittleness and danger of fatigue

Additional Information:

• Production Capacity: Trading
• Delivery Time: 1 week

Additional Information:

• Production Capacity: Trading
• Delivery Time: 1 week
• Packaging Details: 600203(236ml),600204(473ml),101768(946ml),600205(3785)

• Requires very little sanding after use (finish sanding only).
• Each shaper creates small shavings instead of dust for a healthier work environment.
• Can be used with either a drill press or a hand drill.
• Blades will not clog.
• Fits 5/16" (.3125") or larger chuck.
• Materials: Blades made of 400 series stainless steel.
• Do Not Exceed 2500 RPM
• Blade made in USA. Molded in Mexico.
• Microplane's etching technology creates an extremely sharp cutting tooth. Feed work slowly with light pressure until you become accustomed to the effectiveness.
• Use on wood, plastic, sheetrock, rubber, and similar materials.
• Use as an alternative to coarse sandpaper
• Use to remove saw marks from edges or bumps from band saw cuts.
• Great for planing a door for better fit.
• Try it on freehanding wood shapes.

This featherboard, clamps into the T-slot of a UJK Technology Progrip clamp. Once assembles you can fit the clamp along with the featherboard onto a router table, or bandsaw table. This arrangement allows you to position the featherboard in the best possible position to apply sufficient pressure on your workpiece, holding against the machine's fence. The UJK Technology featherboard helps with accurate machinery and is a useful safety aid. N.B. Colour may vary.

Features:

• Featherboard fixes to a UJK Technology Progrip clamp
• Allows use of a feather board on a router table, bandsaw etc
• Helps to maintain accurate machining
• Useful safety aid

The Rockler Universal Drawer Slide Jig is the ultimate aid for installing drawer slides of almost any type, including ball-bearing or epoxy-coated side-mount slides and even center-mount slides! The jig features a locking wedge that holds the slide securely with no risk of slippage. Press the jig against the face of your cabinet and your slide is positioned perfectly level, with the proper setback. The jig can be clamped in place if desired, and it also features an adjustable rod that references off of the face frame rails or cabinet bottom for fast, repeatable height settings.

Features:

• Sliding wedge locks slide securely into the jig
• Adjustable indexing foot allows perfect repeatability
• Foot can be rotated for use on top or bottom
• Cutouts in jig allow access for drill and driver bits
• Large clamping area so jig can be clamped in place
• Durable foamed nylon body with steel indexing rod and ABS foot
• Indexing rod is stored onboard when not in use
• Not compatible with Blum Tandem Drawer Slides.

Additional Information:

• Item Code: 57302
• Production Capacity: trading
• Delivery Time: 1 week

• Featherboard fixes to a ProGrip clamp
• Can then be positioned on a router table
• For safer and better routing

• The Carbide is extremely durable compared to sandpaper.
• The Carbide coating’s sharpness and other unique properties prevent material from building up on the sanding and grinding tools.
• If material build-up does occur, it is easily removed using a metal brush or a cleaning solvent.
• Carbide/tungsten coated sanding tools are extremely long-lasting, and can be used for sanding and the surface treatment of a wide range of materials.
• Saves time and improves results.

• Wood
• Paint
• Cement
• Plaster
• Brick
• Paint And Rust On Ships
• Linoleum
• Filler
• Acrylic
• Fibre Glass
• Carpet Backing
• Pvc
• Concrete
• Epoxy
• Marble
• Carpet Felt

The ultimate in versatility the universal countersink changes diameter to whichever drill bit it is attached. Simply unscrew the two hex head securing bolts and place over the drill bit you want and it instantly adjusts to accommodate the size of drill. The tungsten carbide cutting edges cut cleanly. Suitable for use with 3.0mm to 7.2mm drill bits, the universal countersink can also recess the hole if required by plunging the bit further into the material. Drill bits not supplied.

A very useful pair of clamps for attaching a wooden sub-fence to your circular saw or bandsaw. The clever design allows you to drill an 8.5mm hole in the top of your fence and the clamp holds the fence securely in place leaving the face free from obstruction. The unique clamping action could be useful for many other jig type applications where the top surface needs to be free from obstructions.

Features:

• UJK Technology Fence Clamps
• Supplied as a pair
• Excellent solution for attachment of a wooden sub-fence
• Many other hold down applications possible.

Powerful 1,000kg clamping force for controlled clamping pressure. Clamping range 0-1000mm / 0-39". Foot-operated clamping allows hands-free operation. Extra-wide tripod base maximises stability for large workpieces. Robust, powder-coated, all steel construction for long-lasting service life.

Features:

• Reversible sliding jaws allow extra-wide 1000mm / 39" clamping width capacity
• Urethane jaw facings provide protective, slip-resistant grip
• Foot-operated clamping frees hands for full control of the job
• Improved frame and leg design allows setting up and folding down in seconds
• Stand-alone design creates a hands-free portable workbench
• Large rear foot enables use on softer ground and prevents marking
• Tripod base for stability and safe operation on uneven surfaces
• Rear handle for carrying with ease
• Lock / release switch allows fast, trouble-free release of the jaws
• Quickly folds down for storage and portability
• Tough, all-steel construction holds up to 250kg
• Quick release legs for safe and quick assembly

Additional Information:

• Production Capacity: Trading
• Delivery Time: 1 week

• xcellent hold down device especially on wider boards
• Holds work down and against the fence
• Doubles as a safety guard keeping hands well away from cutters

This mat is made from heat-resistant, easy-to-clean silicone, meaning wet glue rinses off and dried glue peels off. Use it anywhere you want to protect your work surface or your project, whether in the garage, shop or on the dining room table. Since it's heat-resistant, it works well as a protective barrier for hot glue guns. The material is very soft, and one side has a textured surface to trap debris that could scratch or dent your project. Also great for craft projects, art projects and scrap booking.

Features:

• Silicone material is heat-resistant and easily cleaned-dried glue peels right off
• Rolls up for easy storage
• No memory-always lays flat when in use
• Ribbed pattern on one face helps protect your project by trapping abrasive debris; opposite face is smooth

Additional Information:

• Production Capacity: trading
• Delivery Time: 1 week

Carbide is the name of a sintered metal (tungsten) - an extremely hard metal having approx. 98% of the hardness of an industrial diamond. The abrasive consists of grains of carbide of a particular size depending on the purpose which are welded onto a steel base.
These small metallic grains are the abrasive medium, making carbide extremely durable compared to sandpaper. Disc are provided with velcro backing for various power tools as orbital sander/ Delta sander. Carbide sanding and grinding tools lasts up to 150 times longer. Carbide coating’s sharpness and other unique properties prevent material from building up on the sanding and grinding tools. The tools can be used for industrial purposes, as well as for fine finishing jobs. If material build-up does occur, it is easily removed using a metal brush or a cleaning solvent. Carbide/tungsten coated sanding tools are extremely long-lasting, and can be used for sanding and the surface treatment of a wide range of materials. Carbide's long life and effective sanding qualities saves time and improve results.

Velcro backed Triangular disc are available in following sizes and GRIT;

• 3 x 80 mm - GRIT -24-36-60-80-120-180-240
• 3 x 90 mm - GRIT -24-36-60-80-120-180-240
• 3 x 95 mm - GRIT -24-36-60-80-120-180-240
• 147 x 100 mm-7 Holes -GRIT-24-36-60-80- 120-180-240
• 133 x 81 mm - 8 Holes GRIT -24-36-60-80- 120-180-240
• 185 x 93 - 8 Holes GRIT-24-36-60-80-120- 180-240

Tungsten carbide Disc can be used on a variety of material as under-Wet or Dry

•     Paint
•     Wood
•     Cement
•     Plaster
•     Brick
•     Paint And Rust On Ships
•     Linoleum
•     Filler
•     Acrylic
•     Fibre Glass
•     Carpet Backing
•     Pvc
•     Concrete
•     Epoxy
•     Marble
•     Carpet Felt

( Tungsten carbide is not suitable for Steel for grinding but can be used to remove paint/ rust etc from the steel surface. carbide can be used on other metals like aluminium/ copper etc.)

The Gorilla Gripper is a unique, exciting, effective, and essential hand tool for gripping and lifting a variety of construction industry building materials that are large, unwieldy and heavy such as panels of plywood, particle board, wallboard, melamine, MDF, glass, granite, marble, and more. As you know, these materials typically stand four feet high and eight feet or more in length. They're obviously cumbersome to carry and usually heavy as well, but need to be individually moved, perhaps hand-loaded onto trucks and ultimately carried by hand to their final destination within the building structure or onto its roof. Since these panels lack handle holds or apertures for grasping, you typically have to grasp the top edge of each panel between the fingers and palms of your hands and lift the panel a few inches off the ground while walking to carry the sheet of material to the place where it may have to be trimmed to a required dimension-- and then re-carried to the place where it will be installed. This is not only awkward but physically challenging: it stresses and fatigues your fingers, hands, arms, back, chest, and neck. This also presents a risk to the materials themselves because they can slip from your grasp and fall to the ground, resulting in damage to the panels... or to your feet or toes. The Gorilla Gripper solves all of these problems at once!

Featherboards are an excellent accessory for safer routing, spindle moulding, bandsaw or circular saw work. They simply attach to your router or machine table with the supplied T-bolts. The T-bolts come in two lengths, 53mm and 96mm, and for each length a pair are provided for 13.2mm T-track and a pair for standard sized 19mm T-track commonly found machined for mitre fences on the tables of many machines. These featherboards provide vital extra support for the workpiece as it is being passed across the cutter. The amount of applied pressure is sustained over a wide area so you are less likely to experience breakout or chatter on the workpiece. The UJK Technology horizontal featherboards can be used as singles at either side of the cutter or doubled up for extra support when machining a larger section of timber. Each featherboard offers 20mm depth of support and when stacked together, using the supplied spacers, the depth increases to 66mm.

Features:

• UJK Technology Double Horizontal Featherboard
• Holds workpiece against fence
• Excellent for safer routing
• Use as singles or stacked for more support

Additional Information:

• Item Code: 39394
• Production Capacity: trading
• Delivery Time: 1 week