• 1 Master jig
• 1 jig for mid-section of panels
• 1 self centering drill bit diameter 8 mm
• 1 drill bit 8.5 mm
• 1 drill bit 5.7 mm
• 1 drill bit 3 mm
• 1 drill bit stop collar 8.5 mm

• Your router must be unplugged while attaching the Ellipse/Circle Jig and while making any adjustments. 
• Properly secure your workpiece before attempting to make a cut.
• Do not attempt to make the full depth of cut in one pass. Make several passes removing small increments of material each time.
• Maintain awareness of the router bit at all times while cutting.

Additional Information:

• Item Code: 27712
• Production Capacity: Trading
• Delivery Time: 2 weeks

• 2 master jigs for side and middle
• 2 shelving jigs
• 4 self centering drill bits, 5mm,8mm,10mm and 15 mm
• 1 long drill bit 8 mm diameter
• 2 shelving indexing pins.

• 1 master jig for minifix & rafix and dowel
• 4 jigs for hinge, handle&pull,shelving and drawer slide
• 6 self centering drill bits, 3mm-5mm-5mm-15mm-20mm-35mm
• 4 drill bits 5mm – 8mm -8mm -10 mm
• 2 drill bit stop collars 8mm -10 mm
• 2 shelving indexing pins
• 2 plexi measuremet apparatus
• 1 plexi extension piece for rafix 20 system with ridge

• 1 Master jig
• 2 pyramid measurment apparatus (imperial&metric)
• 2 bearing nut

• 3 master jigs
• 2 self centering drill bits 3mm and 15 mm diameter
• 4 drill bits 5mm,8mm,8mm and 10 mm
• 3 drill bit stop collars
• 2 shelving indexing pins.

• Get perfectly straight, accurate cuts every time with track-guided cutting
• Break down panels and plywood easily and quickly with cutting capacity up to 100"
• Splinter-free cuts with tearout protection from anti-chip guide strips
• Make the cuts you need – anywhere – by taking your saw to the workpiece instead of bringing the workpiece to a fixed saw location
• Easily attaches to your left-blade or right-blade circular saw, and removes easily
• No clamps needed thanks to anti-slip guide strips that keep the track in place through the entire cut

• Perfect for do-it-yourselfers and anyone new to Kreg Joinery
• Removable Drill Guide for benchtop and portable use
• For use with materials from 1/2" to 11/2" thick (12-38mm)
• Hardened-steel Kreg drill guides feature a lifetime warranty
• Removable Drill Guide is great for making home repairs
• Wood-chip relief holes keep the drill bit clear of excess wood chips.

• Make rip cuts and crosscuts up to 24" wide
• Cut multiple pieces to the same size with just one setup
• Use the oversize edge guide for precise control throughout the cut
• Eliminate need for marking, measuring, and layout lines
• Take your saw to the material instead of having to take your material to the saw
• Universal Sled accepts most circular saws—left or right blade
• Reversible edge guide for left- or right-handed use.

• Rip, cross cut, and make angled cuts up to 50" long in plywood, MDF, and panels
• Simply align the Guide Track with your marks to make accurate cuts
• Hold track in place without clamps thanks to anti-slip guide strips
• Prevent splintering with anti-chip strips that support material during the cut
• Begin cuts easily with a Starting Block that supports the saw and allows normal blade guard operation
• Mount almost any circular saw—left or right blade—to the Universal Sled
• Universal Sled is compatible with the Kreg Rip-Cut™
• Take your saw to the material instead of having to take your material to the saw

• Quickly and accurately crosscut boards up to 12" (305mm) wide
• Adjustable guide arm requires no trimming
• Switch back and forth between almost any circular or jig saw
• Rubber feet hold the guide securely in place for precision and control
• Low-profile design won’t interfere with saw
• Built-in roof pitch scale for cutting siding

• 3/4'' square aluminum guide rail, and a material stop for precise, repeatable results
• For very tall doors, simply rip a 3/4'' x 3/4'' stick in whatever length is needed, or purchase a length of standard 3/4'' square aluminum extrusion
• Makes an ideal hinge cup drilling solution for small shops, or for jobsite work
• Template guides are solid steel for durability
• Templates are secured in place with sturdy metal threaded holes
• Integral clamps attach guides securely to your door
• Clamps double as feet, providing firm support as you drill
• Use scrap blocks or Bench Cookies to support outer edge
• Center line perfectly positions the template
• Offsets are adjustable for both face frame and frameless construction
• Template bases have non-marring bottoms

Additional Information:

• Item Code: 53420
• Production Capacity: trading
• Delivery Time: 1 week

• 1 master jig
• 2 exchangeable master jig acrylic head.
• 1 jig for multing plate.
• 1 self centering drill bit 35 mm
• 1 self centering drill bit 3 mm
• 1 metal ruler 15 cm length

Additional Information:

• Item Code: S170A
• Production Capacity: Trading
• Delivery Time: 2 weeks

• 1 main jig
• 1 self centering drill bit 10 mm diameter
• 1 drill bit 6 mm diameter

• 1 master jig
• 2 self centering drill bits, 5mm and 12 mm
• 1 drill bit 8 mm
• 25 set pack of Minifix 12 mm cam with dowel

• 1 adjustable master jig for minifix and rafix
• 1 connection jig for drilling holes on mid panels
• 1 shelving jig
• 7 self centering drill bits, 3mm-5mm-5mm-8mm- 15mm-15mm-20mm
• 3 drill bits, 8mm-10mm- 8 mm long
• 2 shelving indexing pins
• 2 drill bit stop collars (8mm-10mm)
• 1 plexi measurement apparatus from 15-16 mm to 18-19mm
• 1 plexi extension piec for rafix 20 system with ridge

• Creates joints 50% stronger than standard Kreg Joints
• Optimized for large outdoor projects
• For use with materials 11/2" thick (38mm) and thicker
• Works with the Kreg Jig® K5, K4, and K3
• Stop Block provides easy, repeatable registration to workpiece
• Face Clamp locks into Kreg Jig HD for secure drilling
• Hex-Shank HD Drill Bit is Quick-Change compatible.

Additional Information:

• Item Code: KJHD
• Production Capacity: Trading
• Delivery Time: 1 week
• Packaging Details: HD Drill Guide, stop block, 1/2" (12mm) diameter HD stepped drill bit, 6" HD driver bit, stop collar, Allen wrench, starter Kreg¿¿ Screw set, and owner¿¿¿s manual.

• The Kreg Jig® K5 Master System combines the Kreg Jig® K5 with premium accessories to make it even easier to get started building with Kreg Joinery. Accessories include a 3" Wood Project Clamp with Automaxx® auto-adjust technology, a Portable Base for building on the go, and downloadable plans for six great projects.
• The new 3" Wood Project Clamp features auto-adjust technology that simplifies project construction by allowing you to clamp workpieces of varying thicknesses without ever having to adjust the clamp. That makes it the perfect companion to the ratcheting, tool-free workpiece clamp on the Kreg Jig® K5.
• Adding the Portable Base gives you yet another use for your Kreg Jig® K5—simplified setup for portable building and making repairs. See the Portable Base in action in this Quick Tip video.
• Plus, the Kreg Jig® K5 Master System includes step-by-step downloadable plans for six great home projects so that you can get started building right away.

Leigh's RTJ400 is designed specifically for router table use, offering fast accurate routing of through dovetails, box joints and half blind dovetails on your router table. The Leigh template is precision CNC machined from aircraft grade aluminium for perfect joinery every time. The RTJ400 will make 9 sizes of through dovetails, 3 sizes of half-blind dovetails and 4 sizes of box joints. Set up is fast and simple with 5 instruction strips that guide you through set up and are located on the top of the jig giving you all the set up positions required. A perfect joint fit is guaranteed and repeatable with the patented Leigh e10 guide bushing with elliptical barrel that can be rotated for joint fit. Board alignment is done using the adjustable side stop with an offset for rebated half blind dovetails. The precision template and clamping frame can be aligned perfectly with clearly marked pin locators that are etched into the template. 9 sizes of through dovetail and 3 sizes half blind including half pitch. Dovetail board thickness: through dovetails 3.2mm (1/8")–25mm (1"), half blind 12.7mm (1/2")–25mm (1"). Box joints: 4 joint sizes 2.4mm (3/32"), 4.8mm (3/16"), 9.5mm (3/8"), 19mm (3/4"), board thickness 3.2mm (1/8")–25mm (1"). Please note, half-pitch through dovetails require an optional e7 guide bushing and optional 140-8 straight bit. Supplied with blanking plates, stop rod, depth gauge,1/2" shank Dovetail bits: 80-500, 120-500, Straight bits 160 and 143-500, 4 cam speed clamps, hex key and adjustable side stop. Detailed instructional videos and comprehensive user guides are available online.

Features:

• RTJ400, designed specifically for router table use
• Fast accurate routing of through and half blind dovetails and Box Joints
• Precision CNC template and clamping fence
• 9 sizes through dovetails, 3 sizes half blind dovetails
• 4 sizes of box joints
• Fast and simple with 5 on board instruction strips
• Patented Leigh e10 elliptical guide bush rotates for joint fit
• Board alignment using adjustable side stop with an offset available
• Clearly marked pin locators that are etched into the template
• Note, For use with router tables that accept threaded guide bushes
• 4 x 1/2" shank cutters, speed clamps and blanking caps

• Use to form E or L type joints
• Heavy aluminium extrusions sliding on steel bars
• Supplied with hardened steel bushes and 2 clamps

Additional Information:

• Item Code: 410233
• Production Capacity: trading
• Delivery Time: 1 week

• Make strong hidden joints, fast and easily produced
• Furniture making, kitchen fitting, strong frames and carcases
• Use for a wide range of material / timber thickness 13 - 36mm
• Clear metric scales
• Perfect joints, no need to pre-drill mating workpiece
• All metal parts so no flex in the jig
• Bench mounting

The UJK Technology Pocket Hole Jig Kit speeds up the process of making a strong joint. The two mini jigs link together so you can drill twin pocket holes into wider boards without repositioning the jig. A dovetail recess securely links the two jigs together ensuring both holes are parallel. A magnetic insert on the top of the jig helps hold it in place when clamping it to the workpiece. The kit includes a stepped drill, long reach 1/4" hex Torx driver, a box of 100 fine thread (3.8 x 30mm) pocket hole screws and a stop collar with hex key. Use this jig kit to join timber from 13 to 100mm thick and not just butt joints as this is an excellent way to reinforce a mitre joint and more.

• 1 Master Jig
• 1 Measurement Apparatus
• 1 Drill Bit (5mm)

• Extra-wide base, high walls and strong Acme threaded clamp screw hold panels securely
• Thick cushioned pads to prevent marring
• Durable glass-filled polycarbonate construction
• Mounting holes allow for attachment to work surface for creating assembly jigs
• Jig holds panels exactly 3/4'' off the work surface so you can use scrap boards to support other corners if using only one jig at a time

Additional Information:

• Item Code: Rockler58918
• Production Capacity: trading
• Delivery Time: 1 week

• fixed support made of durable reinforced plastic
• threaded screw thread
• ergonomic non-slip grip
• ratchet with unlocking tongue
• marking for measuring length
• adjustable end stop

• Removable Drill Guide for benchtop and portable use
• Drill Guide includes 3-hole fixed spacing
•  For use with materials 1/2" to 11/2" (12-38mm) thick in 1/8" (3mm) incremental settings
• Dust-Collection Shroud collects wood chips as you work
• Material Support Stop for consistently repeating hole spacings
• Hardened-steel Kreg Drill Guides feature a lifetime warranty

• Simple: The Kreg Jig® Mini is good for very specific applications where the smallest jig possible is required. The simplistic design includes the hardened-steel drill guide of the other jigs but does not include a reference fence, so material thickness adjustments must be made manually.
• Unlimited Material Thickness: The Kreg Jig® Mini is the only Kreg Jig® that does not include a positioning fence. This fenceless design allows you to make precise angle and stock depth adjustments as needed, making the Mini the most positionable Kreg Jig® available.
• Wood-Chip Relief Hole: With the Kreg Jig® Mini, you don’t have to keep removing the drill bit to clean out the hole. A wood-chip relief hole in the jig gives the removed material a place to go, so you can keep on drilling.
• Plug-Setting Feature: If you decide to conceal or decoratively accent your pocket holes with our solid wood pocket hole plugs, the Mini’s plug setting feature is the fastest, easiest, and safest way to do so.
• Hardened-Steel Drill Guides: Precise pocket holes are a guarantee with the Kreg Jig® Mini because the hardened-steel drill guide keeps the bit from deflecting as it hits the workpiece.