• Includes 36" miter bar
• Indexing marks make angle setting easy — each mark represents 1° of taper
• Dual tape measures provide convenient reference and also help set angles
• Two wide-body hold down clamps prevent stock from drifting dangerously from your fence
• Clamps have non-marring rubber caps for enhanced grip
• Three adhesive strips run across the jig to help stabilize your workpiece
• With taper angle zeroed out, jig works great to rip straight edges on rough lumber

Precision router table module specifically designed for TWX7 Workcentre. Compatible with all three Triton plunge routers (TRA001, MOF001 and JOF001) for shaping, planing, rebating, trenching, moulding and grooving. Extruded aluminium main fence and adjustable side fences. Features micro adjusters, rotating cruciform fence spacers, safety guard and dust extractor connector. Includes quick set horizontal (2) and vertical featherboards (2). Easy assembly and configuration. Combined with TWX7 Workcentre achieves a full featured Router Table capable of professional results. High quality materials and components ensure a long life. Fully supported by optional accessories for extending functionality.

Features:

• Full feature precision router table tackles all routing tasks
• Extruded aluminium main fence with adjustable side fences for accuracy, strength and long life
• Fence micro adjusters and rotating cruciform spacers for precise adjustment
• Quick set featherboards for safe workpiece securing
• Compatible with all three Triton plunge routers for the perfect combination of class leading tools
• Dust extractor connector for cleaner and safer operation

The grinding attachment is bolted or screwed onto the bench adjacent to the side face of the grinding wheel and provides a convenient way of re-sharpening drill points to the correct angle. Complete with instructions for set-up and use. Full range of point angles can be ground with correct angle and clearance for efficient cutting. Capacity 3mm(1/8") to 19mm(3/4") bit diameter and minimum length of 75mm(3"). Wear eye protection.

Additional Information:

• Item Code: 340161
• Production Capacity: trading
• Delivery Time: 1 week

Additional Information:

• Item Code: 58918
• Production Capacity: Trading
• Delivery Time: 2 weeks

The Standard V-DrillGuide - (1/8-3/8") has 17 holes (1/64" increments): 1/8, 9/64, 5/32, 11/64, 3/16, 13/64, 7/32, 15/64, 1/4, 17/64, 9/32, 19/64, 5/16, 21/64, 11/32, 23/64, 3/8".

Other Details:

• Award Winning: 2015 Pro Tool Innovation Awards & 2013 PTEN Award
• The guides feature a precision ground base to assure stability and accurate perpendicular alignment of drill bits on flat surfaces.
• All drill and tap guides are made from alloyed steel that is heat treated for durability.
• 90 degree "V-groove" design allows perpendicular alignment on round and cornered material.
• Can be used on flat surfaces, round parts and corners.
• Lifetime Warranty on every guide.
• 100% American made quality
• Portable, pocket-sized.
• Natural steel finish.

Additional Information:

• Production Capacity: Trading
• Delivery Time: 2 weeks

• Adjustable frame for rectangles and squares.
• Allows a router to cut recesses, slots, face panel moulds etc. Can also be used to create panel doors for kitchens etc.
• Four lengths of 700mm extrusion with dual metric/imperial measuring scales.
• Working area 600mm x 600mm.
• Cross cut accuracy to 0.1mm, a square is required to square frame before use.
• Includes router anti-tilt block.
• Use with a guide bush with minimum 8mm spigot length, or use Unibase as guide.
• Secure with standard clamps or use optional clamp kit.

This brush features silicone bristles that are easy to wash with water, and quickly shed dried glue for long-lasting service. They're also spaced to hold plenty of wet glue, meaning less time dipping and more time spreading. Use the narrow dimension for edges and the wide dimension for faces. The paddle end opposite the bristles can be used like a pen for finer detail work such as mortise and tenon, dovetail, and box joints, or like a spatula for spreading glue into grooves and mortises. Also available from Rockler, the 3-Piece Silicone Glue Application Kit (#43662, sold separately). It's easy to clean without chemical solvents - even fully dried polyurethane glue cracks and peels right off the bristles - and re-using the brush is also friendly to the environment. When it's time for a glue-up, simply riffle the bristles as you would a deck of cards to peel any dried glue off and restore the brush to pristine condition. Unlike traditional brushes, this one won't shed bristles into your bead of glue. The entire brush is waterproof, so rinsing thoroughly with warm water makes cleanup easy when glue is wet. Silicone Glue Brush measures 7" long. The tapered brush tip measures 1" wide x 1/2" deep.

Additional Information:

• Item Code: 45624
• Production Capacity: trading
• Delivery Time: 1 week

The Standard V-DrillGuide - (3/8-1/2") has 9 holes (1/64" increments): 3/8, 25/64, 13/32, 27/64, 7/16, 29/64, 15/32, 31/64, 1/2".

About the Guides:

• The guides feature a precision ground base to assure stability and accurate perpendicular alignment of drill bits on flat surfaces.
• All drill and tap guides are made from alloyed steel that is heat treated for durability.
• 90 degree "V-groove" design allows perpendicular alignment on round and cornered material.
• Can be used on flat surfaces, round parts and corners.
• Lifetime Warranty on every guide.
• 100% American made quality.
• Portable, pocket-sized.
• Natural steel finish.

The Package Includes:

• Standard V-Drillguide^® - (3/8-1/2")
• One plastic hanger storage tube

These simple looking spring clips firmly secure a Festool or Makita guide rail to Parf Dogs or other 20mm diameter dogs. The whole point of using a multifunction table and Parf Dogs is to achieve complete accuracy. Even though guide rails have anti-slip strips on their undersides, in the presence of wood dust there is always the possibility the ‘anti-slipperiness’ may not be as sticky as intended. If the rail moves fractionally during the cut, your finished piece will not be as accurate as you wish. The body of the Dog Rail Clip fits into your rail’s T-slot. Slide the Dog Rail Clip into position, then clip the spring around the 20mm bench dogs ensuring the rail is tight against the dogs and guarantees a precise result every time. The Parf dog rail clip is bowed to give an even fit. Supplied as a pack of 2, UJK Technology Dog Rail Clips are designed and made in the UK.

Additional Information:

• Item Code: UJKParfdograil
• Production Capacity: Trading
• Delivery Time: 1 week

• Low friction slide surfaces provide smooth, controlled travel
• Head pivots from horizontal to vertical allowing for uneven ground
• Supports over 220lbs for a wide variety of applications
• Folds flat for easy storage and transport
• Extra-wide tripod for excellent stability on level or uneven ground
• Angle adjustment head with built-in clamping system
• Height adjusts from 25 - 37"

Additional Information:

• Item Code: 330090

The guides feature a precision ground base to assure stability and accurate perpendicular alignment of drill bits on flat surfaces:

• All drill and tap guides are made from alloyed steel that is heat treated for durability. 
• 90 degree "V-groove" design allows perpendicular alignment on round and cornered material.
• Can be used on flat surfaces, round parts and corners.
• Lifetime Warranty on every guide.
• 100% American made quality.
• Portable, pocket-sized.
• Natural steel finish

Benefits:

• Automatically squares up the tap with the surface.

• A V-groove along the bottom of the V-TapGuide allows for perpendicular alignment with all tap sizes on round parts or corners.
• Portable, pocket size.

• Natural steel finish-non-plated.
• Made from special nickel alloyed steel that is heat treated.
• The bottom surface is ground to assure stability & accurate perpendicular alignment on flat surfaces.
• Supplied with a handy plastic storage case.
• Guide holes are sized for ANSI standard ground taps.
• Accomodates the following tap sizes: 1.6mm, 2mm, 2.5mm, 3mm, 3.5mm, 4mm, 5mm, 6mm, 8mm, 10mm, 12mm, 14mm & 16mm

Additional Information:

• Item Code: CentreOffsetMarking
• Production Capacity: Trading
• Delivery Time: 2 weeks

• Solid brass machined to an accuracy of +/- 0.005''
• Easy-to-read laser etched labels in both fractions and decimals
• Durable plastic case with molded high-density foam insert for protection

Additional Information:

• Item Code: 51936
• Production Capacity: Trading
• Delivery Time: 2 weeks