Nexus Automech Private Limited

Input Voltage	480V
Brand	Allen Bradley
Model Name/Number	Powerflex 4M
Input Phase	3 - Phase
Input Frequency	50/60 Hz
Output Current	24 A
Start Up Torque	200% for 3S
Ambient Temp.	-10 to 50 Degree C
Installation Type	Panel Mount
Warranty	1 Year
Overload Capacity	200% for 3 Sec
Enclosure Rating	IP20
Communication Ports	RS485
Output Power	11 KW
Capacity	15 HP

Power Ratings:

• 100…120V: 0.2…1.1 kW / 0.25…1.5 Hp / 1.6…6 A
• 200…240V: 0.2…7.5 kW / 0.25…10 Hp / 1.6…33 A
• 380…480V: 0.4…11 kW / 0.5…15 Hp / 1.5…24 A

• IP20, NEMA/UL open type enclosures V/Hz control, slip compensation
• Integral RS-485 communications
• Feed-through wiring
• DIN rail mounting feature on A and B frame drives
• Ambient temperatures up to 50 °C (122 °F) permitted with minimal spacing between drives
• Zero Stacking™ Drives for ambient temperatures up to 40 °C (104 °F)
• Drive overload protection and ramp regulation
• Configuration and programming via integral LCD keypad, remote keypad, or software
• Premier Integration with PowerFlex AC drives uses the Logix control platform to simplify parameter and tag programming and reduces development time

Manufacturer Series	POINT I/O
Mounting Type	DIN Rail
Communication Port	EtherNet/IP
Resolution	16-bit signed integer
Input Channels	2 single-ended channels
Data Output	6 bytes of data (2 channels + 2 status bytes)
Enclosure Type	Open

The Allen-Bradley 1734-IE2V is a 2-channel analog voltage input module designed for use with the POINT I/O system. It provides a cost-effective solution for applications requiring voltage signal processing in a compact form factor.

Technical Specifications:

• Input Channels: 2 single-ended channels
• Input Voltage Range:
  • Unipolar: 0 to 10 V DC
  • Bipolar: ±10 V DC
• Resolution: 16-bit signed integer (-32,768 to +32,767)
• Data Output: 6 bytes of data (2 channels + 2 status bytes)
• Input Rate Configuration: Adjustable to match process variable characteristics (slow, medium, fast, fluctuating, non-fluctuating)
• Power Supply: 24V DC (nominal)
• Power Consumption: 0.75 W at 28.8V DC
• Thermal Dissipation: 2.5 BTU/hour at 28.8V DC
• Operating Temperature Range: -20°C to 55°C (-4°F to 131°F)
• Mounting: DIN rail mounted within the POINT I/O system
• Enclosure Type: Open (not waterproof; limited dust protection)

               Features:

• Analog-to-Digital Conversion: Utilizes a Delta-Sigma converter for accurate signal processing.
• Status Indicators: Provides diagnostic LEDs for module status, network status, and node status.
• Alarm Thresholds: Configurable low, low-low, high, and high-high alarm levels.
• Signal Conditioning: Supports scaling instructions to convert raw data to engineering units.
• Compatibility: Works with various POINT I/O communication adapters, including DeviceNet, PROFIBUS, ControlNet, and Ethernet/IP.

 

 

Additional Information:

• Item Code: 1734-IE2V
• Production Capacity: 24V DC (nominal)
• Delivery Time: 3 to 4 week
• Packaging Details: box packing

Manufacturer Series	NONE
Communication Port	NONE
Mounting Type	DIN Rail
Output Type	Analog
Pulse Transmission Output	16-point 24V DC

Input Voltage Range-15–30V DC (nominal 24V DC)

Input Signal Delay -8 ms (hardware filter)

Input Current (per point)-Approx. 3.0 mA at 24V DC

Isolation Voltage-30V (continuous), type tested at 707V DC

Backplane Current-110 mA @ 5V DC

Dimensions-118 x 35 x 87 mm (H x W x D)

Mounting Type- DIN rail or panel mount

LED Indicators-1 per channel

Field Power Supply-External 24V DC required for inputs

Additional Information:

• Delivery Time: 3 TO 4 WEEK

Manufacturer Series	POINT I/O
Mounting Type	DIN Rail
Output Type	4 single-ended, non-isolated current outputs
Communication Port	adapter
Power Supply	24 V DC

The Allen-Bradley 1734-OE4C is a compact, 4-point analog current output module designed for the POINT I/O system. It provides precise control over analog actuators such as control valves, dampers, and variable frequency drives (VFDs).
Key Specifications

• Output Channels: 4 single-ended, non-isolated current outputs

• Output Range: User-configurable to 0–20 mA or 4–20 mA

• Output Resolution: 16 bits (0–21 mA, 2.5 µA per count)

• Power Supply:

  • Nominal: 24V DC

  • Range: 10–28.8V DC

  • Current Draw: 75 mA at 5V DC (from POINTBus)

• Temperature Range:

  • Operating: –20°C to 55°C (–4°F to 131°F)

  • Storage: –40°C to 85°C (–40°F to 185°F)

• Dimensions: 56.6 mm (W) × 12.1 mm (D) × 77.5 mm (H)

• Weight: 45.36 g

• Mounting: DIN rail

• Status Indicators:

  • Module Status: Green/Red

  • Network Status: Green/Red

  • Output Status: Green/Red for each channel

• Data Format: Signed Integer

Manufacturer Series	Allen-Bradley 1734
Mounting Type	DIN Rail
Communication Port	adapter
Material	Thermoplastic

The Allen-Bradley 1734-TOP is a POINT I/O Terminal Base module designed for use with the POINT I/O system. It serves as the interface between the I/O modules and the field wiring, providing a secure and reliable connection.
Key Specifications

• Number of Terminals: 8

• Terminal Type: Removable screw-clamp terminals

• Terminal Wire Size: 22–14 AWG (0.25–2.5 mm²)

• Torque Rating: 0.6 Nm (7 lb-in)

• Operating Temperature: –20°C to 55°C (–4°F to 131°F)

• Storage Temperature: –40°C to 85°C (–40°F to 185°F)

• Relative Humidity: 5% to 95% (non-condensing)

• Mounting: DIN rail (horizontal or vertical)

• Dimensions: 49 mm x 12 mm x 144 mm (1.93 in x 0.47 in x 5.67 in)

• Weight: Approximately 63.8 g (2.25 oz)

• Material: Thermoplastic

• Certifications: UL, CSA, CE

Manufacturer Series	micrologix 1500
Mounting Type	DIN Rail
Converter Type	Delta-Sigma

The Allen-Bradley 1769-IF4I is a 4-channel analog input module designed for use with CompactLogix and MicroLogix 1500 controllers. It provides individually isolated inputs for both voltage and current signals, making it suitable for applications requiring high accuracy and noise immunity.

Key Specifications

• Input Channels: 4 (Individually Isolated)

• Input Signal Types:

  • Voltage: ±10V, 0–10V, 0–5V, 1–5V

  • Current: 0–20mA, 4–20mA

• Resolution:

  • Unipolar: 16 bits

  • Bipolar: 15 bits plus sign

• Input Impedance:

  • Voltage: 1 MΩ

  • Current: 249 Ω

• Converter Type: Delta-Sigma

• Isolation:

  • Group to Bus: 500V AC, 710V DC (1 minute)

  • Channel to Rack: 500V AC, 710V DC (1 minute)

  • Channel to Channel: 500V AC, 710V DC (1 minute)

  • Channel to Channel (Continuous): 250V AC

• Power Consumption:

  • 5V DC: 145mA

  • 24V DC: 125mA

• Heat Dissipation: 3 Watts

• Mounting Options:

  • DIN Rail: EN 50 022 - 35 x 7.5 or 35 x 15

  • Panel Mount: Using M4 or #8 screws

• Dimensions:

  • Height: 118 mm (4.65 inches)

  • Width: 35 mm (1.38 inches)

  • Depth: 87 mm (3.43 inches)

• Weight: Approximately 0.247 kg (0.545 lbs)

• Operating Temperature: 0°C to 60°C (32°F to 140°F)

• Storage Temperature: -40°C to 85°C (-40°F to 185°F)

Brand	IDEC
Voltage	24V DC
Product Type	HMI+PLC Combo
Total I/O Points	24 Points
PLC Power	24V
Communication Protocol	Modbus RTU, RS-485, Modbus TCP, Ethernet/IP, RS-232
Material	Sheet Metal
Mounting Type	Panel

The IDEC KIT-FC6A-C16R-HG5G-VHP is a comprehensive starter kit designed for industrial automation applications. This kit integrates a 15-inch HMI with a 16 I/O relay-based PLC, offering a compact and efficient solution for control systems,
Package Contents

• PLC Module: FC6A-C16R1CE (16 I/O relay-based CPU).

• HMI: HG5G-V5FT22TF-B (15-inch touchscreen).

• Software: WindLDR programming software.

• Accessories: Power supply and necessary cables.

• Technical Specifications

   

  • Power Supply: 24V DC.

  • Program Capacity: 384K bytes (48,000 steps).

  • Data Memory: Data Register: 56,000; Internal Bit: 12,400; Timer: 1,024; Counter: 512.

  • Expansion Modules: Supports up to 12 expansion modules.

  • Communication Ports: 1 x Ethernet (RJ45), 1 x USB, 1 x RS232/RS485 (selectable).

  • Certifications: CE, UL, TUV, Class I Div 2 Hazardous Location.

Mounting Type	Panel Mount
Display Size	4 inch
Resolution	480 x 272 Pixels
Control Type	Touch Screen
Configuration Software	IDEC's WindOI-NV4 software
Memory	12 MB
Backlight Life:	50,000 hours

The IDEC HG1J-4FT22TG-S is a 4.3-inch TFT LCD Human-Machine Interface (HMI) designed for industrial applications requiring a compact, durable, and user-friendly touchscreen interface.
Key Specifications

• Display: 4.3-inch TFT LCD, 480 x 272 pixels resolution

• Touchscreen: Projected Capacitive (PCAP), supports multi-touch and glove operation

• Bezel Color: Silver

• Brightness: 500 cd/m²

• Backlight Life: 50,000 hours

• Operating Voltage: 12–24V DC (10.2–28.8V DC range)

• Power Consumption: Up to 12W

• Operating Temperature: -20°C to +55°C

• Humidity: 10% to 95% RH (non-condensing)

• Protection Rating: IP66F/IP67F (Type 4X, 13)

• Dimensions: 123.8 mm (W) x 86.5 mm (H) x 41.3 mm (D)

• Weight: Approximately 260g

• Certifications: UL61010, UL Type 4X, 12, and 13, Class I Div 2 for hazardous locations

Manufacturer Series	POINT I/O
Mounting Type	DIN Rail
Output Type	Analog
Communication Port	EtherNet/IP
Power Supply	24V DC
Quick Turnaround	False

The Allen-Bradley 1734-AENT is an EtherNet/IP™ Adapter module designed for the POINT I/O™ system. It serves as the communication bridge between the POINT I/O modules and an Ethernet network, enabling seamless integration into industrial automation systems.

                                                                                     The Allen-Bradley 1734-AENT is an EtherNet/IP™ Adapter module designed for the POINT I/O™ system. It serves as the communication bridge between the POINT I/O modules and an Ethernet network, enabling seamless integration into industrial automation systems.

Key Specifications

Communication Protocol: EtherNet/IP™

Power Supply: 24V DC

Temperature Rating: -20…55 °C (-4…131 °F)

Mounting: DIN rail

Dimensions: 79.8 mm (H) x 56.1 mm (W) x 133.1 mm (L)

Weight: 0.307 kg

Repairable: Not repairable

Preferred Availability: True

Quick Turnaround: False

Stock Status: Stocked

Lead Time: 5 days

 Features & Capabilities

I/O Capacity: Supports up to 63 POINT I/O modules, with a maximum of 504 input and output points.

Ethernet Connectivity: Equipped with a single RJ-45, Category 5 Ethernet port supporting 10/100 Mbps communication rates.

Power Supply: Contains an integrated power supply that converts 24V DC to 5V DC for the backplane, powering the connected POINT I/O modules.

Diagnostic Indicators: Features multiple status indicators for module, network, and I/O status, facilitating troubleshooting and system monitoring.

Mounting Flexibility: Can be mounted both horizontally and vertically to fit various space requirements.

Installation & Configuration

Installation Instructions: Detailed installation procedures are provided in the official installation manual.

Configuration Tools: Utilize Rockwell Automation's Studio 5000 Logix Designer or RSLogix 5000 software for module configuration and integration into the control system.Network Configuration: Assign IP addresses to the module using standard BootP or DHCP tools.

Additional Information:

• Item Code: 1734AENT
• Production Capacity: 24V DC
• Delivery Time: 2-3 Week
• Packaging Details: Box Packing

Manufacturer Series	POINT I/O
Mounting Type	DIN Rail
Communication Port	EtherNet/IP adapter
Field Power	24V DC

The 1734-EP24DC is a 24V DC Power/Bus Extension Module designed for the POINT I/O™ system by Allen-Bradley. It serves as an expansion power supply, enabling the extension of the POINTBus current and supplying power to additional modules installed to the right of the power supply. This module is compatible with any 1734 POINT I/O adapters

 Technical Specifications

• Module Type: Expansion Power Supply
• Supply Voltage Range: 10–28.8V DC
• Nominal Input Voltage: 24V DC
• Maximum Supply Current: 10A
• Inrush Current: 6A for 10 milliseconds
• Field Power: 24V DC
• Operating Temperature: -20 to 55 °C (-4 to 131 °F)
• Nonoperating Temperature: -40 to 85 °C (-40 to 185 °F)
• Operating Vibration: 5g at 10–500 Hz
• Operating Shock: 30g
• Mounting: Horizontal or Vertical
• Indicators: Field power status and 5V system power indicators
• Input Overvoltage Protection: Reverse polarity protection
• Dimensions: 76.2 mm (H) x 25.4 mm (W) x 133.4 mm (L)
• Weight: Approximately 0.23 kg
• Wire Size: 22–14 AWG solid or stranded copper wire

 

Additional Information:

• Item Code: 1734EP24DC
• Production Capacity: 24V DC
• Delivery Time: 2-3 Week
• Packaging Details: Box packing

Mounting Type	DIN Rail
Communication Port	POINT I/O
Power Consumption	0.6 W (maximum)

The 1734-IE8C is an 8-channel high-density analog current input module designed for use with the Allen-Bradley POINT I/O system. It provides a cost-effective solution for applications requiring precise current signal measurement and integration into distributed I/O architectures.

Technical Specifications

• Input Channels: 8 single-ended, non-isolated current inputs
• Input Signal Range:
  • Unipolar: 0–20 mA
  • Bipolar: 4–20 mA
• Resolution: 16-bit signed integer (-32,768 to +32,767)
• Input Impedance: 60 Ω
• Conversion Type: Delta-Sigma
• Common Mode Rejection Ratio (CMRR): -120 dB
• Normal Mode Rejection Ratio (NMRR): -60 dB
• Power Supply: 24V DC (nominal)
• Power Consumption: 0.6 W (maximum)
• Thermal Dissipation: 2.0 BTU/hour (maximum)
• Operating Temperature Range: -20°C to 55°C (-4°F to 131°F)
• Mounting: DIN rail mounted within the POINT I/O system
• Enclosure Type: Open (not waterproof; limited dust protection)

      Features

• Signal Processing: Utilizes Delta-Sigma conversion for accurate signal processing.
• Status Indicators: Provides diagnostic LEDs for module status, network status, and node status.
• Alarm Thresholds: Configurable low, low-low, high, and high-high alarm levels.
• Signal Conditioning: Supports scaling instructions to convert raw data to engineering units.
• Compatibility: Works with various POINT I/O communication adapters, including DeviceNet, PROFIBUS, ControlNet, and Ethernet/IP.

 

Manufacturer Series	POINT I/O
Mounting Type	DIN Rail
Output Type	Analog
Country of Origin	Made in India

The Allen-Bradley 1734-EP24DC is a 24V DC Expansion Power Supply designed for use with the POINT I/O system. It extends backplane power and field voltage to additional I/O modules, supporting modular and scalable control architectures

Key Specifications

• Input Voltage: 10–28.8V DC (24V DC nominal)

• Output Voltage: 24V DC

• POINTBus Output Current:

  • 1 A @ 10–19.2V input (horizontal mounting)

  • 1.3 A @ 19.2–28.8V input (horizontal mounting)

  • 1 A @ 10–28.8V input (vertical mounting)

• Inrush Current: 6 A for 10 milliseconds

• Power Supply Current Capacity: 10 A

• Power Consumption: 9.8 W

• Power Dissipation: 3 W

• Thermal Dissipation: 10 BTU/hour

• Isolation Voltage: 50V continuous

• Operating Temperature: -20 to 55°C (-4 to 131°F)

• Mounting: DIN rail (horizontal or vertical)

• Module Capacity: Supports 4 to 17 I/O modules, depending on current requirements

Mounting Type	DIN Rail
Output Type	Analog
Communication Port	EtherNet/IP

Memory:

• 1 MB standard user memory

• 0.5 MB dedicated safety memoryState Electric+3Softcon+3Routeco+3

Integrated Safety:

• Certified for SIL 3 (IEC 61508), PLe (ISO 13849-1), and Category 4 applications

Motion Control:

• Supports up to 4 axes of CIP motion over EtherNet/IP

Networking:

• Dual EtherNet/IP ports with Device Level Ring (DLR) capability for enhanced network resiliency

• Supports up to 16 EtherNet/IP nodes

I/O Expansion:

• Supports up to 8 local 1769 I/O modules

Programming:

• Compatible with Studio 5000 Logix Designer software (version 28 or later)

• Supports IEC 61131-3 programming languages: Ladder Diagram (LD), Structured Text (ST), Function Block Diagram (FBD), and Sequential Function Chart (SFC)

Memory Card:

• Ships with a 1 GB SD card; supports up to 2 GB SD cards Rockwell Configurator

Physical Dimensions:

• Width: 89 mm

• Height: 132 mm

• Depth: 114 mm

Environmental Specifications:

• Operating temperature: 0°C to 60°C

• Storage temperature: -40°C to 85°C

• Relative humidity: 5% to 95% non-condensing

Additional Information:

• Delivery Time: 3 TO 4 WEEK

Manufacturer Series	MicroLogix 1500 controller.
Mounting Type	DIN Rail
Output Type	Digital
Communication Port	Ethernet/IP

Key Specifications

• Outputs: 16 sourcing outputs (one group)

• Voltage Category: 24V DC

• Operating Voltage Range: 20.4 to 26.4V DC

• Output Delay: 1.0 ms (on), 2.0 ms (off)

• Current Draw @ 5.1V: 160 mA

• Heat Dissipation: Max 2.69 W

• Off-State Leakage Current: Max 1.0 mA @ 26.4V DC

• Enclosure Type: Open style (no enclosure)

• Isolation: 1200V AC for 2 seconds or 1697V DC for 2 seconds, output point to bus

• Mounting: DIN rail or panel mount

• Dimensions (HxWxD): 118 x 35 x 87 mm (4.65 x 1.38 x 3.43 in.)

• Weight: Approximately 255 g (0.56 lb)

• Wire Size: 22–14 AWG solid, 22–16 AWG stranded

• Power Supply Distance Rating: 8 modules

• Replacement Parts: Terminal block (1769-RTBN18), door label (1769-RL1), door (1769-RD)

Additional Information:

• Delivery Time: 3 to 4 week

Manufacturer Series	I/O
Mounting Type	DIN Rail
Output Type	Analog

Key Specifications

• Output Type: 24V DC sourcing (solid-state)

• Number of Outputs: 8 (grouped in two sets of 4)

• Voltage Range: 20.4–26.4V DC

• Max Output Current: 2 A per channel, 8 A total per module

• Surge Current: 4 A for 10 ms, repeatable every 2 seconds

• Isolation: 510V AC or 720V DC for 1 minute (qualification test)

• Mounting Options: DIN rail or panel mount

• Operating Temperature: 0°C to 60°C

• Dimensions (HxWxD): 118 mm x 35 mm x 87 mm

• Weight: Approximately 0.283 kg

Additional Information:

• Delivery Time: 3 to 4 week

Manufacturer Series	I/O
Mounting Type	DIN Rail
Output Type	Digital

Output Type: 32 sourcing (NPN) digital outputs

Voltage Range: 20.4 to 26.4 V DC

Current Capacity:

• Per Point: 0.5 A (up to 60°C), 1.0 A (up to 30°C)

• Per Module: 4 A

Surge Current: 2.0 A for 10 ms, repeatable every 2 seconds

Output Delay:

• ON: 0.1 ms

• OFF: 1.0 ms

Isolation: 1200V AC for 2 seconds or 1697V DC for 2 seconds between output point and bus

Physical Dimensions: 118 mm (H) x 52.5 mm (W) x 87 mm (D)

Weight: Approximately 0.406 kg

Additional Information:

• Delivery Time: 3 to 4 week

Manufacturer Series	I/O
Mounting Type	DIN Rail
Output Type	Power Supply Module

Input Voltage: Selectable range of 85–265V AC or 170–265V AC

Input Frequency: 47–63 Hz

Output Current: 4.0 A at 5V DC and 2.0 A at 24V DC

Power Consumption: 200 VA at 120V AC; 240 VA at 240V AC

Inrush Current: Maximum of 25 A at 132V AC

Isolation Voltage: Reinforced insulation rated at 265V, tested at 2596V DC for 1 second

Mounting Options: DIN rail or panel mount

Dimensions (H x W x D): 118 mm x 70 mm x 87 mm

Weight: Approximately 630 g (1.39 lb)

Operating Temperature: 0°C to +60°C

Enclosure: Open-style with integrated, replaceable fuse (e.g., Littelfuse 02183.15MXP)

Additional Information:

• Delivery Time: 3 TO 4 week