Nexus Automech Private Limited

Sensing Mode	Proximity
Sensor Type	Diffused

Sensing Range: 1 mm to 9 mm

Sensor Type: Photoelectric proximity sensor with background suppression

Switching Output: PNP, light switching (Light-ON)

Response Time: 625 µs

Light Source: Red LED (660 nm)

Connection: 3-wire, 2-meter PVC cable

Protection Rating: IP67 (dust-tight and water-resistant)

Operating Temperature: -20°C to +50°C

Housing: Miniature G2 flat design

Sensing Mode	Proximity
Sensor Type	Diffused

Detection Range: 1 to 18 mm with background suppression

Output Type: PNP, light switching mode

Light Source: PinPoint LED

Dimensions: 14 mm (W) × 24 mm (H) × 3.5 mm (D)

Connection: 3-wire, 2-meter cable

Housing: VISTAL® material with steel mounting plates for durability

Sensing Mode	Proximity
Sensor Type	Diffused

Sensing Range: 0 mm to 8 mm (maximum 9 mm)

Minimum Detectable Object: 0.1 mm

Light Source: Visible blue PinPoint LED (455 nm)

Switching Output: PNP, dark switching

Response Time: < 0.625 ms

Switching Frequency: 800 Hz

Supply Voltage: 10–30 V DC

Connection: 2 m, 3-wire PVC cable

Housing: Plastic (VISTAL®), IP67 rated

Operating Temperature: –20°C to +50°C

Dimensions: 14 mm (W) × 24 mm (H) × 3.5 mm (D)

Sensing Mode	Through-Beam
Sensor Type	Through-Beam

Sensing Method: Through-beam (requires separate emitter and receiver)

Sensing Range: Up to 700 mm

Output Type: PNP, light-on switching mode

Response Time: 625 µs

Light Source: Red LED (660 nm)

Voltage Supply: 10–30 V DC

Connection: 2-meter, 3-wire cable

Housing: Miniature rectangular design (4.5 mm × 21 mm × 11 mm)

Protection Rating: IP67 (dust-tight and water-resistant)

Operating Temperature: -20°C to +50°C

Sensing Mode	Through-Beam
Sensor Type	Through-Beam

Specifications

• Sensing Method: Through-beam

• Sensing Distance: 0–200 mm

• Output Type: PNP, Light-ON

• Light Source: Red LED (660 nm)

• Response Time: 625 µs

• Supply Voltage: 10–30 V DC

• Connection: 3-wire, 2 m cable

• Protection Rating: IP67

• Operating Temperature: -20°C to +50°C

• Adjustment: Fixed (no manual adjustment)

• Housing: VISTAL® plastic, compact rectangular design

Sensing Mode	Through-Beam
Sensor Type	Through-Beam

Specifications

• Sensing Principle: Through-beam (requires separate emitter and receiver)

• Sensing Range: Up to 700 mm

• Switching Output: PNP, dark switching (output active when beam is interrupted)

• Light Source: PinPoint red LED (660 nm)

• Response Time: 625 µs

• Connection: 200 mm cable with M8, 3-pin connector

• Housing Dimensions: 4.5 mm (W) × 21 mm (H) × 11 mm (D)

• Housing Material: Plastic

• Protection Rating: IP67 (dust-tight and water-resistant)

• Operating Temperature: -20°C to +50°C

• Adjustment: Fixed (no manual sensitivity adjustment)

Sensing Mode	Through-Beam
Sensor Type	Through-Beam
Sensing Distance	10 m
Output Type	PNP + NPN
Supply Voltage	12-24 V DC
Switching Output	NO + NC
Housing Type	Cylindrical M18
Light Source	Red LED
Response Time	0.5 ms
Protection Rating	IP67

Sensing Method: Through-beam

Sensing Distance: 0–60 mm

Switching Output: PNP, Dark-on mode

Response Time: 625 µs

Light Source: PinPoint red LED (660 nm)

Supply Voltage: 10–30 V DC

Connection: 3-wire, 2 m cable

Housing Material: VISTAL® plastic

Protection Rating: IP67

Operating Temperature: -20°C to +50°C

Dimensions: 4.5 mm (W) × 21 mm (H) × 11 mm (D)

Brand	Banner
Usage/Application	Object Detection
Material	Plastic
Sensing Distance	Max. 2000 mm
Shape	Rectangular
Model Name/Number	Q5X
Power Supply	24 VDC
Voltage	30 VDC
Connection Type	Euro M12 4-pin Rotatable Connector
Output	1 PNP/NPN with IO-Link; 1 PNP/NPN Multi-Function I/O

Detection of extremely small objects. The extremely small light spots provide the ideal starting point for precise object and feature detection in automation – even when detecting tiny objects.

Brand	Banner
Usage/Application	Industrial
Material	Plastic
Color	Black
Sensing Distance	12 m
Model Name/Number	Q20 Series
Range	10 m
Voltage	30 VDC
Light Source	LED
Output	No output. 2 m (6.5 ft) Cable
Light Color	Red

The Q20 is a versatile sensor with universal rectangular housing and multiple mounting options, making it ideal for global manufacturing.

Brand	Allen-Bradley
Resolution	30 mm
Sensing Range	Max. 730 mm
Housing Profiles	Slim
Operating Environment	IP54
Model Name/Number	45DLA Discrete Light Array Photoelectric Sensors

45DLA Discrete Light Array Photoelectric Sensors detect targets anywhere in a two dimensional area — even if the parts are irregularly shaped, sized or positioned. These cost-effective sensors combine multiple emitter or receiver elements into a single housing to create a sensing field that can detect targets over a wider area and provide a simple discrete (On/Off) output.

Brand	Sick
Usage/Application	Industrial
Material	Plastic
Color	Blue
Sensing Distance	0.9 m
Model Name/Number	W4-3
Response Time	<0.5 ms
IP Rating	IP67
Light Source	LED
Electrical Connection	3-Pin M8 Connector
Operating Temperature	-40 Degree C to +60 Degree C
Mounting Type	Panel Mount
Detection Type	Diffuse
Maximum DC Voltage	30V
Maximum Current	100 mA
Dimensions	16 x 39.5 x 12 mm

Best-in-class sensing performance in a miniature housing, Best background suppression sensor in its class, Universal use of PinPoint technology in all models, Flexible sensor settings, monitoring, advanced diagnostics, and display thanks to IO-Link.

Voltage	30 VDC
Brand	Sick
Usage/Application	Industrial
Operating Temp	+70 Degree C
Color	Blue
Cable Length	3 m
Output	More than 100 mA

The sure way to detect any object, The most flexible and complete portfolio of hybrid sensors, New and intuitive light strip, Detection of transparent objects with AutoAdapt technology.

Voltage	30 V DC
Model Name/Number	GR118
Brand	Sick
Usage/Application	Industrial
Housing Material	Metal Nickel-plated Brass and ABS Plastic
Enclosure Rating	IP67
Operating Temperature	-25 to +55 Degree C
Light Color	Red

Round, strong, rugged – M18 stainless steel sensor for wash-down applications,  High mechanical ruggedness due to stainless-steel housing 1.4404 /316L. M12 male connector and 2 m cable variants IP67, IP68 and IP69K enclosure rating – for washdown applications.

Voltage	30V
Model Name/Number	W16
Size/Dimension	20 mm x 55.7 mm x 42 mm
Brand	Sick
Response Time	500 Micro s
Operating Temperature	-40 Degree C ~ 60 Degree C
Output Configuration	Push-Pull, NPN/PNP

Other Details:

• Technologies: ClearSens, LineSpot, TwinEye, OptoFilter
• BluePilot: Optical alignment aid, adjustment of the sensing range via Teach-Turn adjustment with optical sensing range indicator or via IO-Link
• PinPoint LED: Light-intensive red sender LED
• Smart Sensor: Enhanced Sensing, IO-Link, Diagnostics, Smart Tasks
• Vistal housing: High chemical, thermal and mechanical resistance

Brand	Sick
Usage/Application	Industrial
Material	Stainless Steel
Sensing Distance	5 m 1
Model Name/Number	W4S-3
Type of Light	Visible Red Light
Enclosure Rating	IP69K
Weight	45 g

Reliable detection of transparent objects, Hygienic designed stainless steel housing and accessories, PinPoint LED technology provides a highly visible laser-like light spot, Teach-in stainless steel metal membrane or external teach-in.

Brand	Sick
Usage/Application	Industrial
Voltage	30 V DC
Sensing Distance	5 m
Color	Blue
Model Name/Number	W12-3 Series
Shape	Rectangular
Output Current	100 mA
Operating Temperature	-40 Degree C to 60 Degree C

Rugged metal housing provides exceptional performance in demanding applications, Autocollimation with retro-reflective sensor, Highly visible, precise light spot and high-energy IR transmitters.

Brand	Sick
Light Source	Infrared LED
Interface	IO-Link
Model Number	WLL180T Series
Switching Frequency	55 Hz
Switching Output	NPN
Housing	M12
Housing Material	Plastic
Degree of Protection	IP50
Operating Temperature	-55 to +125 deg C

High-performance fiber-optic sensor with world’s fastest response time, Selectable response time up to 16 µs, 2 x 4-digit digital display, High-resolution signal processing.

Brand	Allen-Bradley
Color	Black
Application	Error Proofing Bin-picking
Warning Light	Red warning light indicator to notify operator of incorrect component selection
Packaging Type	Box
Usage	Industrial

This sensor specifically designed for bin-picking applications and object detection in the parts assembly industry. When used as part of a suitably configured bin-picking system, the 45PVA effectively prevents mispicks to enhance efficiency and minimize downtime. It is also the ideal sensing solution for today's error-proofing initiatives, particularly those in the automotive industry.

Brand	Sick
Usage/Application	Industrial
Color	Blue
Sensing Distance	5 m 1
Model Name/Number	W4S-3
Size/Dimension	12.2 x 41.8 x 17.3 mm
Light Source	PinPoint LED
Housing Material	Plastic ABS
Type Of Light	Visible Red Light
Enclosure Rating	IP66

Slim photoelectric sensors reliably detect transparent objects, Single-lens autocollimation optics, Flexible sensor settings, monitoring, advanced diagnostics, and visualization thanks to IO-Link.

Brand	Sick
Usage/Application	Industrial
Voltage	30 V DC
Material	PTFE
Color	Blue
Sensing Distance	3 m
Model Name/Number	W4-3
Size/Dimension	22 x 42 x 21.8 mm
Response Time	500 micro s
Light Source	Red LED
Housing Material	PTFE Coating PTFE
Ingress Protection	IP67
Operating Temperature	-40 Degree C to 60 Degree C

Teflon-coated photoelectric sensors withstand the harshest environments,  Sensor and cable have a rugged Teflon coating for use in the most aggressive environments.

• Suitable for use in the food and beverage industry

Brand	Banner
Usage/Application	Industrial
Material	Plastic
Sensing Distance	200 mm
Color	Yellow and Black
Model Name/Number	T18-2 Series
Voltage	30V
Operating Temperatures	-40 to +70 Degree C
Ingress Protection	IP69K

T18-2 Series sensors are the next generation of self-contained photoelectric sensors. They have added strength and reliability for use in washdown and thermal shock environments on food production lines.

Brand	Sick
Usage/Application	Industrial
Material	Metal
Sensing Distance	25 m
Color	Blue
Model Name/Number	W12-2
Size/Dimension	15 x 49 x 41.5 mm
Light Source	Laser
Type Of Light	Visible Red Light
Enclosure Rating	IP69K

High-performance photoelectric sensor family with laser optics,  est-in-class retro-reflective laser performance in a metal housing, Connection via cable or rotatable connector, Mounting options with through holes, blind holes, oblong holes and dovetail, Laser protection class 1 or 2.

Brand	Sick
Light Source	Infrared LED
Interface	RS-232
Model Number	LL3 Series
Switching Frequency	50 Hz
Switching Output	PNP
Housing Material	Plastic
Degree of Protection	IP68
Operating Temperature	-40 to 125 Deg C

A wide variety of solutions to your most challenging applications: SICK's fiber-optic cablesFor any application-oriented sensor solution, a suitable fiber-optic cable must be chosen. At SICK, the broad range of fiber-optic cables made from plastic and glass fibers permits optimal automation solutions. This applies in particular to tasks for which the fiber-optic cable requires application-specific adaption, where flexible cable installation is crucial, where high temperatures prevail, or a particular material compatibility is important. While the fibers of plastic fiber-optic cables are characterized, among other things, by the smallest of bend radii and maximum flexibility, and can also be shortened to any length, the glass fiber-optic cables are more chemically resistant and suitable for a higher temperature range. The wide variety of end sleeve options or individual special sleeves enable virtually any installation possibility. Depending on the application, the fiber-optic cable's protective cladding can be made from plastic, metal, or Teflon for exposure to aggressive chemicals.

Load Current	Less Than 100 mA
Brand	Sick
Voltage	30 V DC
Usage/Application	Industrial
Light Source	Laser Pin
Dimensions (W x H x D)	7.7 mm x 27.5 mm x 13.5 mm
Packaging Type	Box

Detection of extremely small objects. The extremely small light spots provide the ideal starting point for precise object and feature detection in automation – even when detecting tiny objects.

Brand	Banner
Usage/Application	Industrial
Color	Yellow
Model Name/Number	Q12 Series
Voltage	30 V DC
IP Rating	IP67
Connection	2 m Cable
Max Sensing Distance	30 mm
Operating Temperature	-20 to 55 Degree C

The Q12 is a small sensor with high performance for powerful sensing in confined spaces. Used in short-range with background suppression.

Brand	Banner
Usage/Application	Object Detection
Sensing Distance	100 mm
Shape	Rectangular w/M18 Mount
Model Name/Number	Q4X
Power Supply	24 VDC
Connection Type	Euro M12 5-pin Integral Connector
Outputs	Bipolar: 1 NPN; 1 PNP

Other Details:

• Discrete, analog (0 to 10 V or 4 to 20 mA), clear object, and IO-Link models available
• Q4X600 high resolution models are now available with analog output and even higher excess gain to solve more applications
• Reliable sensing range from as close as 25 mm and as far as 610 mm
• Detects across a variety of target colors, materials and surfaces based on distance
• Dual teach mode (intensity + distance) is ideal for error-proofing applications and enables clear object detection with no retro-reflector required
• Robust housing rated to IP69K with FDA-grade stainless steel
• Easy setup with responsive buttons
• Rugged design resists mechanical impact, over tightening and extreme vibration
• Clear distance readout from angled four-digit display

Sensing Mode	Retro-Reflective
Sensor Type	Retro-Reflective
Manufacturer	SICK

detailed overview of the SICK GL2S-F1311 (part number 1064358) photoelectric sensor:

Product Overview

• Manufacturer: SICK, Inc.

• Series: G2S

• Model: GL2S-F1311

• Type: Retroreflective photoelectric sensor

• Detection Range: 20 mm to 3,000 mm (0.02 m to 3 m)

• Light Source: Red LED (640 nm)

• Housing Material: Plastic (ABS)

• Ingress Protection: IP67

• Cable Length: 2 meters

• Operating Temperature: -25°C to +50°C

• Connection Type: Cable, 3-wire

• Supply Voltage: 10 V DC to 30 V DC

• Response Time: 600 µs

• Switching Frequency: 800 Hz

• Output Configuration: PNP, Dark-ON  

• Key Features

   

  • Retroreflective Detection: Utilizes a reflector to detect objects, providing reliable performance over a wide range.

  • High Switching Frequency: Supports up to 800 Hz switching frequency, suitable for high-speed applications.

  • Compact Design: Small form factor allows for integration into tight spaces.

  • Durability: IP67 rating ensures protection against dust and water ingress.

Sensing Mode	Retro-Reflective
Sensor Type	Retro-Reflective

Apologies for any confusion earlier. The part number 1063008 corresponds to the SICK GL2S-F5311 photoelectric sensor. Here are the detailed specifications
Product Overview

• Manufacturer: SICK AG

• Model: GL2S-F5311

• Part Number: 1063008

• Series: G2

• Type: Retroreflective photoelectric sensor

• Detection Principle: Dual lens

• Light Source: PinPoint LED

• Light Spot Size: Ø 11 mm at 250 mm

• Wavelength: 640 nm (visible red light)

• Housing Material: Plastic (ABS)

• Optics Material: Plastic (PMMA)

• Ingress Protection: IP67

• Ambient Operating Temperature: –25°C to +50°C

• Storage Temperature: –40°C to +75°C

• Weight: 17.5 g

Sensing Mode	Retro-Reflective
Sensor Type	Retro-Reflective
Sensing Range	20 mm to 3,000 mm

The SICK 1067404 is a retroreflective photoelectric sensor from SICK's G2 Series, designed for precise object detection in industrial automation applications.
Key Specifications

• Sensing Method: Retroreflective

• Sensing Range: 20 mm to 3,000 mm (0.02 m to 3 m)

• Light Source: Red LED (640 nm)

• Output Configuration: NPN, Dark-ON/Light-ON

• Response Time: 600 µs

• Switching Frequency: 800 Hz

• Supply Voltage: 10 V DC to 30 V DC

• Ingress Protection: IP67

• Cable Length: 2 meters

• Operating Temperature: –25°C to +50°C 

• Features

   

  • Dual Lens Detection: Enhances detection reliability and reduces false triggers.

  • Compact Design: Suitable for integration into space-constrained environments.

  • Polarization Filter: Reduces false triggers from shiny surfaces.

  • Cable Connection: Simplifies installation and maintenance.

Sensing Mode	Retro-Reflective
Sensor Type	Retro-Reflective
Response Time	< 0.6 ms
Current Consumption	20 mA
Sensing Range	0.03 m to 2.5 m

The SICK 1064357 is a retroreflective photoelectric sensor from SICK's G2 Series, specifically the GL2S-P1311 model. Here's a detailed overview:
Key Specifications

• Sensing Method: Retroreflective

• Sensing Range: 0.03 m to 2.5 m

• Light Source: Visible red light (PinPoint LED, 640 nm)

• Output Configuration: PNP, Light-ON

• Response Time: < 0.6 ms

• Switching Frequency: 800 Hz

• Supply Voltage: 10 V DC to 30 V DC

• Current Consumption: 20 mA

• Cable Length: 2 meters

• Ingress Protection: IP67

• Ambient Operating Temperature: –25°C to +50°C

• Housing Dimensions (W x H x D): 7.7 mm x 21.8 mm x 13.5 mm

• Weight: 33.7 g 

• Features

   

  • Dual Lens Detection: Enhances detection reliability and reduces false triggers.

  • Compact Design: Suitable for integration into space-constrained environments.

  • Polarization Filter: Reduces false triggers from shiny surfaces.

  • Cable Connection: Simplifies installation and maintenance.

Sensing Mode	Proximity
Sensor Type	Retro-Reflective
Sensing Range	1 mm to 35 mm

The SICK 1064359 corresponds to the GL2S-P5311 photoelectric sensor from SICK's G2 Series.
 Key Specifications

• Sensing Method: Proximity (Background Suppression)

• Sensing Range: 1 mm to 35 mm

• Light Source: Visible red light (660 nm)

• Light Spot Size: Ø 4 mm at 30 mm

• Output Configuration: PNP, Light-ON

• Response Time: ≤ 0.625 ms

• Switching Frequency: 800 Hz

• Supply Voltage: 10 V DC to 30 V DC

• Current Consumption: ≤ 20 mA

• Connection Type: Cable with M8 3-pin connector, 200 mm

• Ingress Protection: IP67

• Operating Temperature: –20°C to +50°C

• Housing Dimensions: 14 mm (W) × 24 mm (H) × 3.5 mm (D)

• Housing Material: Plastic (VISTAL®)

• Optics Material: Plastic (MABS)

• Weight: Approximately 13 g

Sensing Mode	Retro-Reflective
Sensor Type	Retro-Reflective

The SICK 1063070 corresponds to the GSE2S-E1311 photoelectric sensor from SICK's G2 Series. Here's a detailed overview
Key Specifications

• Sensing Method: Retroreflective

• Light Source: Red LED (640 nm)

• Output Configuration: PNP, Light-ON

• Supply Voltage: 10 V DC to 30 V DC

• Response Time: ≤ 0.6 ms

• Switching Frequency: 800 Hz

• Connection Type: Cable with M8 3-pin connector, 200 mm

• Ingress Protection: IP67

• Operating Temperature: –25°C to +50°C

• Housing Dimensions: 7.7 mm (W) × 21.8 mm (H) × 13.5 mm (D)

• Housing Material: Plastic (VISTAL®)

• Optics Material: Plastic (MABS)

• Weight: Approximately 13 g

• Features

   

  • Dual Lens Detection: Enhances detection reliability and reduces false triggers.

  • Compact Design: Slim profile suitable for tight spaces.

  • Polarization Filter: Reduces false triggers from shiny surfaces.

  • Cable Connection: Simplifies installation and maintenance.

Sensing Mode	Through-Beam
Sensor Type	Through-Beam

he SICK 1064363 corresponds to the GSE2S-F1311 photoelectric sensor from SICK's G2 Series. Here's a detailed overview
Key Specifications

• Sensing Method: Through-beam

• Light Source: Red LED (640 nm)

• Output Configuration: PNP, Light-ON

• Supply Voltage: 10 V DC to 30 V DC

• Response Time: ≤ 0.6 ms

• Switching Frequency: 800 Hz

• Connection Type: Cable with M8 3-pin connector, 200 mm

• Ingress Protection: IP67

• Operating Temperature: –25°C to +50°C

• Housing Dimensions: 7.7 mm (W) × 21.8 mm (H) × 13.5 mm (D)

• Housing Material: Plastic (VISTAL®)

• Optics Material: Plastic (MABS)

• Weight: Approximately 13 g

• Features

   

  • Compact Design: Slim profile suitable for tight spaces.

  • High Switching Frequency: Suitable for high-speed applications.

  • Robust Housing: IP67 rating ensures protection against dust and water ingress.

Sensing Mode	Through-Beam
Sensor Type	Through-Beam

The SICK 1063072 corresponds to the GSE2S-F5311 photoelectric sensor from SICK's G2 Series. Here's a detailed overview:
Key Specifications

• Sensing Method: Through-beam

• Light Source: Red LED (640 nm)

• Output Configuration: PNP, Light-ON

• Supply Voltage: 10 V DC to 30 V DC

• Response Time: ≤ 0.6 ms

• Switching Frequency: 800 Hz

• Connection Type: Cable with M8 3-pin connector, 200 mm

• Ingress Protection: IP67

• Operating Temperature: –25°C to +50°C

• Housing Dimensions: 7.7 mm (W) × 21.8 mm (H) × 13.5 mm (D)

• Housing Material: Plastic (VISTAL®)

• Optics Material: Plastic (MABS)

• Weight: Approximately 13 g

•  Features

   

  • Compact Design: Slim profile suitable for tight spaces.

  • High Switching Frequency: Suitable for high-speed applications.

  • Robust Housing: IP67 rating ensures protection against dust and water ingress.

Sensing Mode	Through-Beam
Sensor Type	Through-Beam

The SICK 1064365 corresponds to the GSE2S-N1311 photoelectric sensor from SICK's G2 Series. Here's a detailed overview:
Key Specifications

• Sensing Method: Through-beam

• Light Source: Visible red light (640 nm)

• Output Configuration: NPN, Light-ON

• Supply Voltage: 10 V DC to 30 V DC

• Response Time: ≤ 0.6 ms

• Switching Frequency: 800 Hz

• Connection Type: Cable with M8 3-pin connector, 200 mm

• Ingress Protection: IP67

• Operating Temperature: –25°C to +50°C

• Housing Dimensions: 7.7 mm (W) × 21.8 mm (H) × 13.5 mm (D)

• Housing Material: Plastic (VISTAL®)

• Optics Material: Plastic (MABS)

• Weight: Approximately 13 g

•  Features

   

  • Compact Design: Slim profile suitable for tight spaces.

  • High Switching Frequency: Suitable for high-speed applications.

  • Robust Housing: IP67 rating ensures protection against dust and water ingress.

Sensing Mode	Through-Beam
Sensor Type	Through-Beam

The SICK 1064362 corresponds to the GSE2S-P1311 photoelectric sensor from SICK's G2 Series.
 Key Specifications

• Sensing Method: Through-beam

• Light Source: Visible red LED (640 nm)

• Output Configuration: PNP, Light-ON

• Supply Voltage: 10 V DC to 30 V DC

• Response Time: ≤ 0.6 ms

• Switching Frequency: 800 Hz

• Connection Type: Cable with M8 3-pin connector, 200 mm

• Ingress Protection: IP67

• Operating Temperature: –25°C to +50°C

• Housing Dimensions: 7.7 mm (W) × 21.8 mm (H) × 13.5 mm (D)

• Housing Material: Plastic (VISTAL®)

• Optics Material: Plastic (MABS)

• Weight: Approximately 13 g

• Features

   

  • Compact Design: Slim profile suitable for tight spaces.

  • High Switching Frequency: Suitable for high-speed applications.

  • Robust Housing: IP67 rating ensures protection against dust and water ingress.

Sensor Type	Through-Beam
Sensing Mode	Through-Beam

The SICK 1064364 corresponds to the GSE2S-P5311 photoelectric sensor from SICK's G2 Series. Here's a detailed overview:

 Key Specifications

• Sensing Method: Through-beam

• Light Source: Visible red LED (640 nm)

• Output Configuration: PNP, Light-ON

• Supply Voltage: 10 V DC to 30 V DC

• Response Time: ≤ 0.6 ms

• Switching Frequency: 800 Hz

• Connection Type: Cable with M8 3-pin connector, 200 mm

• Ingress Protection: IP67

• Operating Temperature: –25°C to +50°C

• Housing Dimensions: 7.7 mm (W) × 21.8 mm (H) × 13.5 mm (D)

• Housing Material: Plastic (VISTAL®)

• Optics Material: Plastic (MABS)

• Weight: Approximately 13 g  

Sensing Mode	Proximity
Sensor Type	Retro-Reflective

The SICK 1064348 is a miniature photoelectric proximity sensor from SICK's G2 Series, specifically the GTB2S-E1311 model. This sensor is designed for precise detection of small objects in confined spaces, making it ideal for applications in automated assembly lines, packaging machinery, and material handling systems.
 Key Specifications

• Sensing Method: Proximity (Background Suppression)

• Sensing Range: 4 mm to 15 mm (max. 18 mm)

• Light Source: Visible red LED (640 nm)

• Output Configuration: NPN, Dark-ON

• Supply Voltage: 10 V DC to 30 V DC

• Response Time: < 0.6 ms

• Switching Frequency: 800 Hz

• Connection Type: Cable, 3-wire, 2 m

• Ingress Protection: IP67

• Operating Temperature: –25°C to +50°C

• Housing Dimensions: 7.7 mm (W) × 21.8 mm (H) × 13.5 mm (D)

• Housing Material: Plastic (ABS)

• Cable Material: PVC

• Weight: 33.7 g

• Special Features: Detects small objects with high precision

• Features

   

  • Compact Design: Slim profile suitable for tight spaces.

  • High Switching Frequency: Suitable for high-speed applications.

  • Robust Housing: IP67 rating ensures protection against dust and water ingress.

Sensing Mode	Proximity
Sensor Type	Retro-Reflective

The SICK GTB2S-E1331 (part number 1064354) is a compact photoelectric sensor designed for precise proximity detection in industrial automation applications. Below are its key specifications:
Key Specifications

• Sensor Type: Photoelectric proximity sensor with background suppression

• Sensing Range: 1 mm to 36 mm

• Output Type: NPN, Dark-ON switching

• Supply Voltage: 10 V DC to 30 V DC

• Response Time: < 0.6 ms

• Switching Frequency: 800 Hz

• Light Source: Visible red light (640 nm)

• Connection Type: 3-wire cable, 2 meters

• Ingress Protection: IP67

• Operating Temperature: –25°C to +50°C

• Housing Dimensions: 7.7 mm (W) x 21.8 mm (H) x 13.5 mm (D)

• Housing Material: ABS plastic

• Cable Material: PVC

• Weight: 17.5 g

• This sensor is ideal for applications requiring precise detection of small objects or components in confined spaces.

Sensing Mode	Proximity
Sensor Type	Diffused

ensor Type: Photoelectric proximity sensor with background suppression

Light Source: PinPoint LED (visible red light)

Switching Output: NPN (light switching mode)

Sensing Range: 1 mm to 35 mm

Connection: 3-wire, 2-meter cable

Dimensions: 14 mm (W) × 24 mm (H) × 3.5 mm (D)

Enclosure Rating: IP67

Operating Temperature: Up to 50°C