Novo3D

• The motherboard uses the 32-bit 168MHz ARM-grade Cortex-M4 series STM32F407IGT6 chip, which greatly improves its performance;
• Equipped with highly modular open source firmware Marlin 2.0, which is convenient for users to DIY and secondary development, eliminating the worries of being unable to master the core code
• Marlin 2.0 uses powerful development tools and Visual Studio Code integrated development environment: supports online debugging, which is more helpful for product development and performance optimization, and uses C / C ++ language development

BIGTREETECH SKR Pro v1.2, main control uses the ARM-level Cortex-M4 series with a 32-bit dominant frequency of 168 MHz STM32F407ZGT6 chip, performance is greatly improved.

• Equipped with highly modular open source firmware Marlin2.0, it is convenient for users to DIY and further-development, to avoid the worry of not being able to master the core code.
• Motor driver support :TMC5160,TMC2208,TMC2130,ST820,LV8729, DRV8825,A4988, etc. Display screen support: BIGTREETECH- 2.8 inch TFT,BIGTREETECH-3.5 inch TFT, LCD2004,LCD12864.
• Support Serial WIFI Online Printing. 6 motor drives, 3 extruders, 3 CNC fans. Reserve extended ports of BL Touch, PWM, ADC, UART, I2C and SPI; Support power-off continuous printing, material cut detection, shutdown and other functions; Support for dual Z axis printers (series dual Z.

TFT50 display V3.0 BIGTREETECH Color Screen.

1. When using 12864 screen mode, connect the port EXP1 and EXP2 to the motherboard. There is no touch function in this mode.
2. When using serial port screen mode, connect with TFT or aux-2 on the motherboard via RS232. In this mode, there is touch function.

Cartridge heater 40W Extrusion  heater features specially designed for heating applications  that require High heat transfer, stainless steel heater is corrosion resistant. Stainless steel are the high corrosion resistive material. Due to the high corrosion  Heat resistive wires are widely used in the heater to withstand the temperature. Metallic resistance heating elements may be wire or ribbon, straight or coiled.

The Ceramic Cartridge Heater is a powerful little beast of a heater. Get rid of fragile and poor tolerance enamel resistors and switch to a purpose made high power ceramic heater. Increase the reliability of your extruder with this heater cartridge. Also, it heats up faster. It fits nicely in our extruder, so its an easy replacement. Get your hot end hot quickly and hit the highest of temperatures. Comes with a meter of silicone insulated high-temperature wire. It consist of a cylindrical stainless steel tube and thus provide a high corrosion prevention. The heating wire inside which is wound onto a ceramic core. The choice of coils varies depending at the power, and provide an excellent uniform distribution of heat, which considerably increases the long life of the heater in addition to prevents the oxidation of the heater wire even at high temperatures.

Extruder CR10 Plus hotend KIT:

Hotend CR10 Plus Extruder kit j head remote extruder kit for 1.75mm filament nozzle 0.4mm, with long distance universal accessories set to provide choice. It is made of aluminum alloy, has excellent corrosion resistance and improves the service life of products. You may install the CR-10 J-head hotend remote extruder kit for 1.75mm filament nozzle 0.4mm by yourself. When you receive the product, it already assembled. You can just install it on the machine.

• Print all variety of filaments such as PLA, TPU, ABS,PETG and all other filaments.
• Makes assembly and maintenance easier, assembly parts can be easily replaceable.
• Low weight of entire assembly provides High quality printing.
• Reliable, No clogging and Stringing of nozzle.
• Shorten heat up times of nozzle and increase accurate control of temperature.
• The 3D Printer Extruder Hot End Assembled Kit are original and high quality for Creality CR-10 CR-10S S4 S5 3D Printer.
• Aluminum block dimension: 20 mm x 20 mm x 10 mm

v wheel 3d printer POM for Aluminium profile. The wheel is made up of delrin which is a type of POM. V wheel available with different types of bearing, Materials are are used in high-performance engineering components such as small gear wheels, eyeglass frames, ball bearings, ski bindings, fasteners, guns, knife handles, and lock systems. Further, it has several purposes for different applications. Major applications are as follows: 3D Printers structure uses v slot profile so the normal nuts will get loosen due to vibration and friction, apparently the lock nut holds the wheel tightly. Hence, It is provided with the lock nut.

• It will best fit into aluminium profile 2020, 2040, 4040, etc.
• 3D printer.
• Robotics, Furnitures.
• CNC,
• Custom machines.
• DIY projects.
• CNC Engraving machines.
• Laser engraving machines.
• automation.
• other applications, etc.,

Extruder Dual Hotend kit Select high-quality Aluminum alloy 6063 material, and use refined sandblasting oxidation treatment of product shell to improve the surface texture.

• The heat dissipation efficiency is increased to 40% compared with the existing similar products which can effectively reduce and avoid the occurrence of the throat plug.
• The weight of the Nozzle is at least 20-30% lighter than that of the same type Of the products and the printing accuracy and printing quality can be effectively improved.
• The new design can ensure that the size change of the total height of the products is less than 0.5-1.0mm, which is beneficial to mass production.
• Hotend is compatible with both HT-NTC100K and NTC100K thermistor.

• model:  lj12a3-4-z/bx
• output:  npn, 3 wire, no (normal open)
• work voltage: 6vdc – 36vdc
• output current: 300ma. (sink)
• size: dia. 12 mm. L: 64 mm. (body)
• cable length: 100 cm.
• detection range: 4 mm.
• detection of metal: (copper, iron, aluminuim etc. )

A GL-12 830 Points Solderless Breadboard is an invaluable tool for experimenting with circuit designs whether in the R&D or university lab. A breadboard is used to make up temporary circuits for testing or to try out an idea. No soldering is required so it is easy to change connections and replace components.

Parts will not be damaged so they will be available for re-use afterward. 830 Tie points  128 Groups of 5 connected terminals, 8 Bus of 25 connected terminals Reusable for fast build a prototype of an electronic circuit  will accept transistors, diodes, LEDs, resistors, capacitors and virtually all types of components - No soldering required - Can modify or revise the circuits easily Fit for jumper wire of 0.8mm diameter - Standard 2.54mm hole spacing Adhesive sheet on the back side of the board - Multiple breadboards can be spliced together too.

You just plug-in vertically your components in the position you want without soldering. The board will accept up, clock-clips and the smaller DIPs. Each unit will accept transistors, diodes, LEDs, resistors, capacitors, pots and virtually all types of components.The units are desired to use #22-30 solid hookup wire foe interconnection will plug-in ease. It could be combined with a series features, a unique interlocking design desired. It manages without tools to meet changing requirements and components are re-useful.

1. 100% brand new and high quality
2. Practical and useful
3. Solderless breadboard with 830 points
4. Completely reusable and have a self-adhesive back
5. Easy component placement

• Barely a decade ago, 3D printers were hulking, expensive machines reserved for factories and well-heeled corporations.
• They were all but unknown outside the small circles of professionals who built and used them. But thanks largely to the RepRap open-source 3D printing movement, these amazing devices have become viable and affordable products for use by designers, engineers, hobbyists, schools, and even curious consumers.
• novo3D printer are easy to set up and use, doesnt require much maintenance, and has good print quality. One of the key advantages of 3D printing is the ability to produce very complex shapes or geometries, and a prerequisite for producing any 3D printed part is a digital 3D model or a CAD file.

1. Resume Printing / Power Outage Recovery
2. Filament Detection (optional)
3. Silent running
4. Integrated Modular Design
5. 2.4-inch Touch Screen
6. 32-bit mother board
7. Industrial Grade Chip-set
8. More Accurate Print
9. Well-Made All-Metal Frame
10. Personal Tune Settings

Hammernut 20 Series for aluminium profile 2020, 2040, 4040, etc., which is also called as Sliding T Nut , Tee-nut,Drop In Nut, etc. Usage 3D Printer Parts Tee nuts for building machine V-Slot M5 Tee Nut, Size T 1.6*10*15. A T-slot nut is used with a threaded clamp to position and secure pieces being worked on in a workshop. The T-slot nut slides along a T-slot track, which is set in workbench or table for a router, drill press, or band saw.

1. Leadscrew nut 1 start convey improved precision and higher Z development speeds contrasted with the strung poles utilized on numerous packs. These lead screws are a moderately cheap approach to overhaul the presentation of 3D printer.
2. Single Start: Each rotation moves 2mm. Very slow movement, but with enormous torque. No need to worry about the motor to have enough torque to handle the load!. Even though if the load is heavy, it is not possible for the back-drive the screw- the weight of the axis wont affect the screw much to turn on its own. For some applications that can cause problems. This item is the single-start version.
3. Our lead screws offer an incredible method to transform rotational movement into direct movement. The 2mm pitch offers a decent exchange off between torque required to drive the screw and straight speed made. Every revolution of the lead screw will drive the mating nut decisively 2mm. The OD of our lead-screws is just shy of 8mm to guarantee legitimate fitment in a 8mm ID bearing or clip. These sinks are usually utilized 3D printers, CNC switches, lift systems and automation projects.

1. Enormous burden conveying capacity.
2. Compact in size.
3. Easy to structure.
4. Simple to fabricate; no specific apparatus is required.
5. Enormous mechanical bit of leeway.
6. Exact and precise direct movement.
7. Smooth, calm, and low support.
8. Insignificant number of parts.
9. Most are self-locking.

1. 3D printers,
2. CNC switches,
3. lift systems and
4. automation projects.

• Item Type: Display Screen
• Model Number: BIGTREETECH Mini 12864
• Product Name: Mini 12864 V1.0 LCD
• Feature: RGB
• Appearance size: 104.99mm*47mm
• Power input: DC 5V
• SD card logic voltage: 3.3V and 5V
• Usage: 3D Printer Parts

Cooling fan turbo for 3D Printer Accessories 24V 50*15mm DC Blower Radial Cooling Fan. A device for creating a current of air or a breeze, especially: a. A machine using an electric motor to rotate thin, rigid vanes in order to move air, as for cooling. When we print a small objects or printing with a high speed the molten layer doesn’t have enough time to settle.

At the end it makes the mes out of that. By the usage of the fan they tend to radiate the heat out. This serves a higher importance in achieving the Desired shape with high degree of accuracy.Its properties Super Quiet: This fan will not make you feel uneasy during they are working, but also a quiet experiment environment for you.

Precision M5 Flat Sim washer shows slight corrosion (rust spotting) when left in water for a period of time or when water dries out on them. The blow starts with a high – oxygen gas mixture of, for instance, 80 percent oxygen and 20 percent argon, because there is still plenty of carbon in Mild Steel Flat Washers with which oxygen prefers to combine. Chromium in Carbon Steel Lock Washers also induces ferromagnetism in steel which is not desired in some of the applications, where nickel also helps in countering this problem.

Elements in Carbon Steel Slot Washers have a strong influence on heat – treating; because they tend to slow the diffusion of atoms through the iron lattices and thereby delays the allotropic transformations. Improved harden-ability in Mils Steel Steel Machine Washers is achieved by adding such elements as manganese, molybdenum, chromium, nickel, and boron.