Novo3D

Tee Nut for building machine V-Slot M5 T Nut, Size T 1.6*10*15. T-slot nut use  (T-nut) is similar to hammer nut and it can be used in Aluminium profile. A T-slot nut is used with a threaded clamp to position and secure pieces being worked in a workshop.

Tee Nut Applications

1. Variety of industrial structures and machines can be build using T-slot nuts  Compare A T-slot bolt is generally stronger than a T-slot nut and hex-head cap screw.
2. T-slot structural framing.
3. Workbench or table for a router, drill press , or band saw
4. 3D Printer.

Buttonhead bolt allen CS with a hexagonal socket in its head, designed to be used with an Allen wrench. It is integral to the crank and remains in it when the crank is removed from the spindle.

Hex nut CS are one of the most common nuts available. They are used with anchors, bolts, screws, studs, threaded rods and on any other fastener that has machine screw threads. It is short for hexagon, which means they have six sides. These nuts are also known as finished hex nuts, hex full nuts.

CS Washer shows slight corrosion (rust spotting) when left in water for a period of time or when water dries out on them. The blow starts with a high -oxygen gas mixture of, for instance, 80 percent oxygen and 20 percent argon, because there is still plenty of carbon in Carbon Steel Flat Washers with which oxygen prefers to combine. Chromium in Carbon Steel Lock Washers also induces ferromagnetism in steel which is not desired in some of the applications, where nickel also helps in countering this problem. Our manufacturing unit for Carbon Steel Sealing Washers is capable of producing large and customized order from our client around the world.

Elements in Carbon Steel Slot Washers have a strong influence on heat - treating; because they tend to slow the diffusion of atoms through the iron lattices and thereby delays the allotropic transformations. Improved harden-ability in Carbon Steel Machine Washers is achieved by adding such elements as manganese, molybdenum, chromium, nickel, and boron.

Allen Keys that are designed to let you avail to advantages that are important in fastening jobs. You can use the these to extract more torque for fastening tasks with ease.These Allen keys are made of high-grade alloy steel and are hardened and tempered so that you can perform tough fastening jobs without damaging the keys.These hex keys are coated with black oxide to make them resistant to corrosion so that their durability is enhanced. Black oxide or blackening is a conversion coating for ferrous materials, stainless steel, copper and copper based alloys, zinc, powdered metals, and silver solder. It is used to add mild corrosion resistance, for appearance and to minimize light reflection.

1. M3 CS BUTTON HEAD BOLT lengths  -8,10,12,15,25 - 5pcs each (25pcs).
2. M4 CS BUTTON HEAD BOLT lengths - 8,10,12,16,20,25,30-5pcs each (35).
3. M5 CS BUTTON HEAD BOLT lengths - 8,10,12,16,20,25,30-5pcs each (35)
4. M3 Hex nut - 25pcs.
5. M4 Hex nut - 35pcs.
6. M5 Hex nut - 35pcs.
7. M3 washer - 25pcs.
8. M4 washer - 35pcs.
9. M5 washer - 35pcs.
10. M2 allen key*1
11. M3 allen key*1
12. M4 allen key*1
13. M3 lock nuts - 5pcs
14. M4 lock nuts - 5pcs
15. M5 lock nuts - 5pcs

Hex nut SS are one of the most common nuts available. They are used with anchors, bolts, screws, studs, threaded rods and on any other fastener that has machine screw threads. It is short for hexagon, which means they have six sides. These nuts are also known as finished hex nuts, hex full nuts.

• A slotted nut features grooves on its head intended to align with a hole(s) in the bolt onto which it is threaded.
• These holes commonly accept cotter pins, and, together with slotted nuts, ensure that assemblies do not separate and that machine settings are maintained.

Buttonhead bolt allen SS with a hexagonal socket in its head, designed to be used with an Allen wrench. It is integral to the crank and remains in it when the crank is removed from the spindle.

• Allen Bolts feature a washer face under the head and a chamfered point, whereas a hex bolt does not have a washer face or chamfered threads.
• They are made of stainless steel and are very common in construction or repair projects.

SS Washer are used with high quality bolts in order to prevent the loss of pre-load after application of torque, caused by brinelling. Washers are often coupled with a threaded fastener or bolt. The Stainless Steel Washers have excellent tensile strength & good resistance to corrosion.

It is capable of good weldable and formability. Washers are typically manufactured in the shape of a disc and have two diameters on account of the inner hole and the outer circumference. While disc shaped washers are pre-dominantly used in various industries, other shapes like square, wave, split, star shaped etc.

A basic metal or plain also known as a ring washer, often used to spread the load of a screwed fastening. This may also be used in applications where the hole is of a large diameter as opposed to the fixing nut. It is manufactured with serrations that extend radially inward or outward. These serrations bite into the bearing surface. The star washer is more effective when used with a soft substrate like aluminium or plastic. In fact, it tends to work effectively as a lock washer because it can resist rotation in comparison to a plain washer used on a hard surface.

Allen Keys that are designed to let you avail to advantages that are important in fastening jobs. You can use the these to extract more torque for fastening tasks with ease.These Allen keys are made of high-grade alloy steel and are hardened and tempered so that you can perform tough fastening jobs without damaging the keys.These hex keys are coated with black oxide to make them resistant to corrosion so that their durability is enhanced. Black oxide or blackening is a conversion coating for ferrous materials, stainless steel, copper and copper based alloys, zinc, powdered metals, and silver solder. It is used to add mild corrosion resistance, for appearance and to minimize light reflection.

Hex nut SS are one of the most common nuts available. They are used with anchors, bolts, screws, studs, threaded rods and on any other fastener that has machine screw threads. It is short for hexagon, which means they have six sides. These nuts are also known as finished hex nuts, hex full nuts.

1. M3 SS BUTTON HEAD BOLT lengths – 8,10,12,16,20,25 – 5pcs each (30).
2. M4 SS BUTTON HEAD BOLT lengths – 8,10,12,16,20,25,30-5pcs each (35).
3. M5 SS BUTTON HEAD BOLT lengths – 8,10,12,16,20,25,30-5pcs each (35)
4. M3 Hex nut – 30pcs.
5. M4 Hex nut – 35pcs.
6. M5 Hex nut – 35pcs.
7. M3 washer – 30pcs.
8. M4 washer – 35pcs.
9. M5 washer – 35pcs.
10. M2 allen key*1
11. M3 allen key*1
12. M4 allen key*1
13. M3 lock nuts – 5pcs
14. M4 lock nuts – 5pcs
15. M5 lock nuts – 5pcs

SS Washer are used with high quality bolts in order to prevent the loss of pre-load after application of torque, caused by brinelling. Washers are often coupled with a threaded fastener or bolt. The Stainless Steel Washers have excellent tensile strength & good resistance to corrosion.

It is capable of good weldable and formability. Washers are typically manufactured in the shape of a disc and have two diameters on account of the inner hole and the outer circumference. While disc shaped washers are pre-dominantly used in various industries, other shapes like square, wave, split, star shaped etc.

A basic metal or plain also known as a ring washer, often used to spread the load of a screwed fastening. This may also be used in applications where the hole is of a large diameter as opposed to the fixing nut. It is manufactured with serrations that extend radially inward or outward. These serrations bite into the bearing surface. The star washer is more effective when used with a soft substrate like aluminium or plastic. In fact, it tends to work effectively as a lock washer because it can resist rotation in comparison to a plain washer used on a hard surface.

1. Pharmaceutical Equipment
2. Heat Exchangers
3. Spiral Welded tube for burner pipes and flues
4. Petrochemicals
5. Power Generation
6. Specialty Chemicals
7. Aircraft Exhaust Manifolds
8. Off-Shore Oil Drilling Companies
9. Gas Processing
10. Sea Water Equipment

Hammer nut , High quality: Made of 4.8 grade carbon steel, the surface is nickel plated for good rust resistance and better performance, if you don’t use it for a long time, please wipe a little oil on the surface.

Wide application: 3030 4040 series aluminum profile t-nuts are widely used for the construction of industrial aluminum frame structures, 3D printers, CNC routers, CNC laser cutters, robotics projects.

Thread sizes:  M5 M6 M8 is used to insert into the aluminum profile and connect together with T-screw or others.

Application: The T-nut can securely fix other connecting pieces on the profile groove. During assembly, it can be automatically positioned and automatically locked.

Allen key bolt CS with a hexagonal socket in its head that is designed to be used with an Allen wrench. The Allen bolt is integral to the crank and remains in it when the crank is removed from the spindle.

• Allen Bolts feature a washer face under the head and a chamfered point, whereas a hex bolt does not have a washer face or chamfered threads.
• They are made of low-carbon steel and are very common in construction or repair projects.

Lock nut SS, also known as a lock nut, locking nut, self-locking nut, prevailing torque nut, stiff nut or elastic stop nut, is a nut that resists loosening under vibrations and torque. Elastic stop nuts and prevailing torque nuts are of the particular type where some portion of the nut deforms elastically to provide a locking action.

• Lock nuts feature a unique design that prevents them from loosening when exposed to vibrations.
• Traditional nuts simply consist of a basic threaded hole, so constant exposure to vibrations can knock them loose from the bolt on which they are placed.

Buttonhead bolt allen CS with a hexagonal socket in its head, designed to be used with an Allen wrench. It is integral to the crank and remains in it when the crank is removed from the spindle.

• Allen Bolts feature a washer face under the head and a chamfered point, whereas a hex bolt does not have a washer face or chamfered threads.
• They are made of low-carbon steel and are very common in construction or repair projects.

Allen key bolt CS with a hexagonal socket in its head that is designed to be used with an Allen wrench. The Allen bolt is integral to the crank and remains in it when the crank is removed from the spindle.

Hex nut CS are one of the most common nuts available. They are used with anchors, bolts, screws, studs, threaded rods and on any other fastener that has machine screw threads. It is short for hexagon, which means they have six sides. These nuts are also known as finished hex nuts, hex full nuts.

CS Washer shows slight corrosion (rust spotting) when left in water for a period of time or when water dries out on them. The blow starts with a high – oxygen gas mixture of, for instance, 80 percent oxygen and 20 percent argon, because there is still plenty of carbon in Carbon Steel Flat Washers with which oxygen prefers to combine. Chromium in Carbon Steel Lock Washers also induces ferromagnetism in steel which is not desired in some of the applications, where nickel also helps in countering this problem. Our manufacturing unit for Carbon Steel Sealing Washers is capable of producing large and customized order from our client around the world.

Elements in Carbon Steel Slot Washers have a strong influence on heat – treating; because they tend to slow the diffusion of atoms through the iron lattices and thereby delays the allotropic transformations. Improved harden-ability in Carbon Steel Machine Washers is achieved by adding such elements as manganese, molybdenum, chro

Allen Keys that are designed to let you avail to advantages that are important in fastening jobs. You can use the these to extract more torque for fastening tasks with ease.These Allen keys are made of high-grade alloy steel and are hardened and tempered so that you can perform tough fastening jobs without damaging the keys.These hex keys are coated with black oxide to make them resistant to corrosion so that their durability is enhanced. Black oxide or blackening is a conversion coating for ferrous materials, stainless steel, copper and copper based alloys, zinc, powdered metals, and silver solder. It is used to add mild corrosion resistance, for appearance and to minimize light reflection.

 Package set includes:

1. M3 CS ALLEN HEAD BOLT lengths – 8,10,12,14,25,30 – 5pcs each (30).
2. M4 CS ALLEN HEAD BOLT lengths – 8,10,12,16,20,25,30-5pcs each (35).
3. M5 CS ALLEN HEAD BOLT lengths – 8,10,12,16,20,25,30-5pcs each (35)
4. M3 Hex nut – 30pcs.
5. M4 Hex nut – 35pcs.
6. M5 Hex nut – 35pcs.
7. M3 washer – 30pcs.
8. M4 washer – 35pcs.
9. M5 washer – 35pcs.
10. M2 allen key*1
11. M3 allen key*1
12. M4 allen key*1
13. M3 lock nuts – 5pcs
14. M4 lock nuts – 5pcs
15. M5 lock nuts – 5pcs