Novo3D

These Dupont 2.54mm connector housings are used to make custom jumper cables for solderless breadboards or to go between male and female headers.

• Fits standard Dupont style 2.54mm male and female pins.
• Dupont connectors are the ubiquitous connectors used for making solderless breadboard jumpers as they come in both male and female contacts that mate well with 2.54mm / 0.1" standard male and female headers as well as solderless breadboard contacts.
• Besides making custom jumpers, many items that are not solderless breadboard compatible can be made compatible by soldering wires to them and adding these connectors.
• One nice feature is that the same housing can mount either male or female contacts making them flexible in their application.  On multi-contact housings you can even mix contacts in the same housing in order to key it.
• Another nice feature is the housings are also very easy to get contacts in and out of unlike most housings.   if you decide you want to change from individual jumpers to one that has a 3-pin housing for hooking up to a sensor for instance, you can easily pop the single housings off and pop a 3-pin housing on.
• There is a plastic tab that locks the contact in place.  If this tab is lifted slightly, the contact slides out.  If contacts dont want to stay in the housing, the plastic tab can usually be pressed down a bit to help lock the contact in place.

Notes: These are designed to work with a standard 0.1" spacing.  When using them in an adjacent line, it works best to have the latch portion of the connector visible (facing out) as that side is slightly wider than 0.1".

Dupont connector kit is a full kit which includes wires, male/female pins, housing and it is well packed in a plastic box. This kit will helps to make cable harnesses for Arduino or Raspberry Pi Projects.  comes with an organizer box that allows you to easily store the Dupont connectors and crimp pins. Just open the box and pick up the connector that you need.

• These connectors feature square male pins and square female sockets along with 2.54mm pitch plastic housings.
• Female version of this connector fits into solderless breadboards, Raspberry Pi headers, and many other applications.
• Crimp pins are designed for wires sized between 22 and 28AWG and fit any of our DuPont housings.
• Wire Gauge: 22 - 28AWG

1. 40*1PIN HOUSING.
2. 20*2PIN HOUSING.
3. 10*3PIN HOUSING.
4. 10*4PIN HOUSING.
5. MALE STEEL PINS - 75 PINS.
6. FEMALE STEEL PINS - 75 PINS.
7. SINGLE ROW MALE HEADER - 1
8. RIBBON CABLE - 2M
9. PLASTIC BOX - 1

AWG JST SM housing 2 pin plug male and female connector adapter with electrical cable wire for LED strips, LED wall-washers, LED underground light, LED belt light, curtain light, twinkle light and so on. This set of male and female electrical wires can be widely applied, such as mini remote control helicopter, indoor 3D plane, LED strips and twinkle light.

• Connect led strips within any angle.
• Time-saving, smoothly,and easy.
• Reliable and conveniently to connect.
• Connect method: Male & Female ends push in.

• Working temp.: -40 to 60 Deg
• Material: PVC
• The Maximum load of current:5A

A ribbon cable (also known as multi-wire planar cable) is a cable with many conducting wires running parallel to each other on the same flat plane. As a result the cable is wide and flat. Its name comes from its resemblance to a piece of ribbon. Ribbon cables are usually seen for internal peripherals in computers, such as hard drives, CD drives and floppy drives. On some older computer systems they were used for external connections as well. The ribbon-like shape interferes with computer cooling by disrupting airflow within the case and also makes the cables awkward to handle, especially when there are a lot of them; as a result, round cables have almost entirely replaced ribbon cables for external connections and are increasingly being used internally as well.

1. Color coding is practiced and implemented in ribbon cables to avoid reverse connections.
2. The edge of the cable marked with a red stripe is connected to pin 1 on the connector. Also, different colored cables have been made available for easier identification.

1. Ribbon cabling is used for data transmission and communications.
2. It is often chosen for computer cable applications, where it is used as internal wiring for hard drives, CD drives, and more.
3. Ribbon cables are also commonly used as internal wiring for other electronics and appliances.

JST housing is an electrical connector that is used in stepper motor wire connections, rechargeable battery packs, radio-controlled servos, battery balancers, etc. The connector is made from good quality plastic and has nickel-plated terminals.

1. Width of 1 contact point pin: 1.1 mm(Approx).
2. Good quality plastic.
3. Nickel-plated terminals.
4. Ideal for rechargeable battery packs, radio-controlled servos, etc.

JST connector xh manufactures numerous series (families) and pitches (pin-to-pin distance) of connectors. The term JST is  used as a vernacular term meaning any small white electrical connector mounted on PCBs. The JST XH series are dis connectable crimp-style connector was developed based on the high reliability and versatility of their NH series connectors. The connector is very small with a mounting height of 9.8 mm. These wire-to-board connectors are typically used to bring power to a PC board. XH series connectors are available with one to twenty positions. 

• RC batteries (Li-Po) for charging balance
• AC power input for PCs and lab equipment.

1. 10*2PIN MALE HOUSING.
2. 10*3PIN MALE HOUSING.
3. 10*4PIN MALE HOUSING.
4. 10*5PIN MALE HOUSING.
5. 10*2PIN FEMALE HOUSING.
6. 10*3PIN FEMALE HOUSING.
7. 10*4PIN FEMALE HOUSING.
8. 10*5PIN FEMALE HOUSING.
9. JST FEMALE PIN - 140.
10. PLASTIC BOX- 1

FRC is a flat ribbon cable (also known as multi-wire planar cable) is a cable with many conducting wires running parallel to each other on the same flat plane. As a result the cable is wide and flat. Its name comes from its resemblance to a piece of ribbon.

Ribbon cables are usually seen for internal peripherals in computers, such as hard drives, CD drives and floppy drives. On some older computer systems (such as the BBC Micro and Apple II series) they were used for external connections as well. The ribbon-like shape interferes with computer cooling by disrupting airflow within the case and also makes the cables awkward to handle, especially when there are a lot of them; as a result, round cables have almost entirely replaced ribbon cables for external connections and are increasingly being used internally as well.

Ribbon cable (also known as multi-wire planar cable) is a cable with many conducting wires running parallel to each other on the same flat plane. As a result the cable is wide and flat. Its name comes from its resemblance to a piece of ribbon.

An insulation-displacement contact (IDC), also known as insulation-piercing contact (IPC), is an electrical connector designed to be connected to the conductor(s) of an insulated cable by a connection process which forces a selectively sharpened blade or blades through the insulation, bypassing the need to strip the conductors of insulation before connecting. When properly made, the connector blade cold-welds to the conductor, making a theoretically reliable gas-tight connection.

FRC connector is an insulation-displacement contact (IDC), also known as insulation-piercing contact (IPC), is an electrical connector designed to be connected to the conductor(s) of an insulated cable by a connection process which forces a selectively sharpened blade or blades through the insulation, bypassing the need to strip the conductors of insulation before connecting. When properly made, the connector blade cold-welds to the conductor, making a theoretically reliable gas-tight connection.

1) 10 Pin Connectors (Male&Female) - Each 5 Nos 

2) 14 Pin Connectors (Male&Female) - Each 5 Nos 

3) 16 Pin Connectors (Male&Female) - Each 5 Nos 

4) 20 Pin Connectors (Male&Female) - Each 5 Nos 

5) 26 Pin Connectors (Male&Female) - Each 5 Nos 

Total No. of connectors - 50Nos 

Package Includes - All connectors + 1 Plastic Box

Wire connector is a type of solderless electrical connection. Wire connectors are typically used to terminate stranded wire.

The benefits of Wire connector over soldering and wire wrapping include:

A well-engineered and well-executed crimp is designed to be gas-tight, which prevents oxygen and moisture from reaching the metals (which are often different metals) and causing corrosion Because no alloy is used (as in solder) the joint is mechanically stronger.

Crimped connections can be used for cables of both small and large cross-sections, whereas only small cross-section wires can be used with wire wrap.

Ptfe tube with ID 2 mm and OD 4 mm , ID 4 mm and OD 6 mm for 3D printer . It is a fluorocarbon solid, as it is a high molecular weight compound consisting wholly of carbon and fluorine. It is hydrophobic: neither water nor water-containing substances wet PTFE, as fluorocarbons demonstrate mitigated London dispersion forces due to the high electro-negativity of fluorine.

This has one of the lowest coefficients of friction of any solid. It is widely used for its non sticking property