Nugen Machineries Limited

Additional Information:

• Item Code: PBS
• Pay Mode Terms: Other

• Repetitive accuracy in the beam stopping is ± 0.01 mm.
• Full Control of positioning & speeds of the ram.
• Programming of bending angle upto 0.1 degree resolution, with automatic calculation of bending force & desired bending angle, ensures full protection against concentrated load on toolings.
• Programming of stroke, work speed (10% to 100%), return speed (10% to 100%) to make release of heavy or very wide plates smoother.
• Back Gauge retraction on pinch point.

NC Hydraulic Press Brake, Press Brakes

Short Facts:

1) Fitted with 2 Axes NC controller i.e., provided with NC stroke & NC back
guage which offers better economy evers for multiple bend jobs. Setting for regular jobs can be stored in memory to save time. Allows air bending of different angles by memorizing stroke positions.

2) Enables operator to bend jobs with 1 to 4 bends on each edge in one set up, reducing handling time, inventory of semi-finished jobs & work-in-progress costs.

3) Offers reduced set-up, fastest stroke cycles for all jobs, minimizes the need to refer drawings for repeat runs.

4) Back guage retraction on pinch point.

NC controllers & drives:

The controller memorizes 792(=8 bends per program * 99 programs) stroke positions to store most popular bends, stroke length, stores height of 10 pairs of punches & dies to avoid faulty programming & allows skipping a step in program if the bend is not required on the job. The controller can be connected directly to computer via RS232 serial for data backup