X
I agree to the terms and privacy policy
144188195215245280

Om Murugan Industries

Coimbatore, Tamil Nadu

| GST  33AAAFO3624J1ZI

| Verified Supplier

View Mobile Number 36% Response Rate

Submersible Pumps

We are engaged in manufacturing and supplying of a wide range of Submersible Pumps.

Submersible Water Pumpset
Interested in this product?
Get Best Quote
O.M.I  150mm to 200mm (6 - 8”) Borewell Submersible pump is a product developed by the continuous efforts of our R&D Team and our experience in manufacturing pumps for the past 3 decades.  The pumps are manufactured as per IS 8034 and IS 9283. These pumps are manufactured with utmost care and perfection to give a trouble free and efficient performance.These pumps are manufactured with radial flow or mixed flow impellers according to the head and discharge. Internally mounted mechanical seals are used to reduce power consumption. The checkvalve housing and suction inter connector are made of graded cast iron. The pumps are built with gunmetal or SS impellers and cast iron or SS diffusers. These pumps are powered by rewindable water filled submersible motor suitable for continuous duty. The stator is wound with special water proof poly synthetic film, insulated copper winding wires and low watt loss steel stampings. Specially designed carbon bush high performance thrust bearings are used to withstand axial and down thrust loads. Dynamically balanced rotors are used to give vibration free and noise free operations and thus increase the efficiency and product life cycle. The motors must be filled with clear cold water before erection. The pump is used in bore sizes above 200 mm. These pumps are designed for wide voltage fluctuations.

Specification

Power Range 7.5 kW – 18.75 kW ( 10HP – 25HP)
Speed 2880 RPM
Version 380- 415 V, Three Phase, 50 Hz, A.C. Supply
Maximum total head 80 meter ( 8.0 bar)
Maximum flow rate 114000 LPH (114.4 M3 / Hr)
Maximum Outer diameter in mm 187 mm
Nominal outlet size in inches 4
Minimum cooling flow along the motor 0.16 m/sec
Degree of Protection IP 58
Direction of Rotation Clockwise from driving end.
Thrust Load 3500 lbs.
Type of Duty S1 (Continuous)
Method of starting SD
Maximum starts per hour 4 times
Mounting Standard As per NEMA standards Key Type


Salient Features

  • Easy to Install
  • Noiseless Operations.
  • Wet Type, Water Cooled, Rewind able Motors.
  • Suitable for wide Voltage fluctuations.
  • Can be easily dismantled and repaired.
  • Long life due to sturdy construction.
  • Dynamically balanced rotating parts


Applications
 
  • Agricultural Irrigation
  • Domestic
  • Civil water supply
  • Foundations
  • Industrial & Rural water supply
  • Fire Fighting
  • Water Circulation
  • High Rise Buildings.
  • Pressure boosting.

View Complete Details

Yes I'm interested

Submersible Water Pumpset
Interested in this product?
Get Best Quote
O.M.I  150mm to 200mm (6 - 8”) Borewell Submersible pump is a product developed by the continuous efforts of our R&D Team and our experience in manufacturing pumps for the past 3 decades.  The pumps are manufactured as per IS 8034 and IS 9283. These pumps are manufactured with utmost care and perfection to give a trouble free and efficient performance.These pumps are manufactured with radial flow or mixed flow impellers according to the head and discharge. Internally mounted mechanical seals are used to reduce power consumption. The checkvalve housing and suction inter connector are made of graded cast iron. The pumps are built with gunmetal or SS impellers and cast iron or SS diffusers. These pumps are powered by rewindable water filled submersible motor suitable for continuous duty. The stator is wound with special water proof poly synthetic film, insulated copper winding wires and low watt loss steel stampings. Specially designed carbon bush high performance thrust bearings are used to withstand axial and down thrust loads. Dynamically balanced rotors are used to give vibration free and noise free operations and thus increase the efficiency and product life cycle. The motors must be filled with clear cold water before erection. The pump is used in bore sizes above 200 mm. These pumps are designed for wide voltage fluctuations.

Specification

Power Range 7.5 kW – 18.75 kW ( 10HP – 25HP)
Speed 2880 RPM
Version 380- 415 V, Three Phase, 50 Hz, A.C. Supply
Maximum total head 80 meter ( 8.0 bar)
Maximum flow rate 114000 LPH (114.4 M3 / Hr)  
Maximum Outer diameter in mm 187 mm
Nominal outlet size in inches 4
Minimum cooling flow along the motor 0.16 m/sec
Degree of Protection IP 58
Direction of Rotation Clockwise from driving end.
Thrust Load 3500 lbs.
Type of Duty S1 (Continuous)
Method of starting SD
Maximum starts per hour 4 times
Mounting Standard As per NEMA standards Key Type

Salient Features

  • Easy to Install
  • Noiseless Operations.
  • Wet Type, Water Cooled, Rewind able Motors.
  • Suitable for wide Voltage fluctuations.
  • Can be easily dismantled and repaired.
  • Long life due to sturdy construction.
  • Dynamically balanced rotating parts.
Applications
 
  • Agricultural Irrigation
  • Domestic
  • Civil water supply
  • Foundations
  • Industrial & Rural water supply
  • Fire Fighting
  • Water Circulation
  • High Rise Buildings.
  • Pressure boosting.

View Complete Details

Yes I'm interested

Borewell Submersible pump
Interested in this product?
Get Best Quote
O.M.I  200mm ( 8”) Borewell Submersible pump is a product developed by the continuous efforts of our R&D Team and our experience in manufacturing pumps for the past 3 decades.  The pumps are manufactured as per IS 8034 and IS 9283. These pumps are manufactured with utmost care and perfection to give a trouble free and efficient performance.These pumps are manufactured with radial flow or mixed flow impellers according to the head and discharge. Internally mounted mechanical seals are used to reduce power consumption. The checkvalve housing and suction inter connector are made of graded cast iron. The pumps are built with gunmetal or SS impellers and cast iron or SS diffusers. These pumps are powered by rewindable water filled submersible motor suitable for continuous duty. The stator is wound with special water proof poly synthetic film, insulated copper winding wires and low watt loss steel stampings. Specially designed carbon bush high performance thrust bearings are used to withstand axial and down thrust loads. Dynamically balanced rotors are used to give vibration free and noise free operations and thus increase the efficiency and product life cycle. The motors must be filled with clear cold water before erection. The pump is used in bore sizes above 200 mm. These pumps are designed for wide voltage fluctuations.

Specification

Power Range 33.75 kW – 112.5 kW ( 45 HP – 150 HP)
Speed 2880 RPM
Version 380- 415 V, Three Phase, 50 Hz, A.C. Supply
Maximum total head 296 meter ( 29.6 bar)
Maximum flow rate 810000 LPH (810.0 M3 / Hr)
Maximum Outer diameter in mm 243 mm
Nominal outlet size in inches 6
Minimum cooling flow along the motor 0.16 m/sec
Degree of Protection IP 58
Direction of Rotation Clockwise from driving end.
Thrust Load 10000 lbs 33.7 kW to 45 kW, 15000 lbs upto 112.5 kw.
Type of Duty S1 (Continuous)
Method of starting SD
Maximum starts per hour 4 times
Mounting Standard As per NEMA standards Key Type


Salient Features

  • Easy to Install
  • Noiseless Operations.
  • Wet Type, Water Cooled, Rewind able Motors.
  • Suitable for wide Voltage fluctuations.
  • Can be easily dismantled and repaired.
  • Long life due to sturdy construction.
  • 8” Pump available on request.
  • Dynamically balanced rotating parts.
Applications
 
  • Agricultural Irrigation
  • Civil water supply
  • Industrial & Rural water supply
  • Fire Fighting
  • Water Circulation
  • High Rise Buildings.
  • Pressure boosting.

View Complete Details

Yes I'm interested

Submersible Water Pumps
Interested in this product?
Get Best Quote

Submersible Water Pumps

Get Latest Price

O.M.I 100 mm (4”) Borewell Submersible pump is a product developed by the continuous efforts of our R&D Team and our experience in manufacturing pumps for the past 3 decades.  The pumps are manufactured as per IS 8034 and IS 9283. These pumps are manufactured with utmost care and perfection to give a trouble free and efficient performance.These pumps are manufactured with radial flow or mixed flow impellers according to the head and discharge. Internally mounted mechanical seals are used to reduce power consumption. The pumps are built with Noryl impellers and diffusers. The check valve housing and suction inter connector are made of graded cast iron. These pumps are powered by rewindable water filled submersible motor suitable for continuous duty. The stator is wound with special water proof poly synthetic film, insulated copper winding wires and low watt loss steel stampings. Specially designed carbon bush high performance thrust bearings are used to withstand axial and down thrust loads. Dynamically balanced rotors are used to give vibration free and noise free operations and thus increase the efficiency and product life cycle. The motors must be filled with clear cold water before erection. The pump set is used in bore sizes above 100 mm. These pumps are designed for wide voltage fluctuations.

Specification

Power Range 0.37 kW – 3.7 kW (0.5HP-5 HP)
Speed 2880 RPM
Version Single phase 200-240V, Three phase, 380 -415V, 50Hz, A.C Supply
Maximum total head 310 meters (31 bar )
Maximum flow rate 20000 LPH (20 M3 /Hr)
Maximum Outer diameter in mm 96 & 98
Nominal outlet size in inches 1¼,1½, 2 & 2½
Minimum cooling flow along the motor 0.15 m/sec
Degree of Protection IP 58
Direction of Rotation Clockwise from driving end
Thrust Load 1500 Ibs
Type of Duty S1 (continuous)
Method of starting Direct on Line, Capacitor Start Capacitor  Run (CSCR) / Permanent Split Capacitor (CSR)
Maximum starts per hour 12 times
Mounting Standard As per NEMA standards


Salient Features

  •  Light Weight
  •  Easy to Install
  • Noiseless Operations.
  • Wet Type, Water Cooled, Rewind able Motors.
  • Suitable for wide Voltage fluctuations.
  • Most of the models have ISI.
  • Single phase pumps with electrical panel board.
  • The pump is covered with SS jackets.
  • The motor uses half steel single piece body to reduce the OD to 96 mm, so that it    enter any bore hole
  • Can be easily dismantled and repaired
  • Pumps having 27 ft per stage are also available in certain models.  
  • Dynamically balanced rotating parts.

Applications
  • Agricultural Irrigation
  • Domestic
  • Civil water supply
  • Foundations
  • Industrial & Rural water supply
  • Lawn
  • Garden watering
  • Fire Fighting
  • Water Circulation
  • Pressure boosting and Ponds


View Complete Details

Yes I'm interested

Borewell Submersible Water Pumpset
Interested in this product?
Get Best Quote
O.M.I  175mm to 200mm (7 - 8”) Borewell Submersible pump is a product developed by the continuous efforts of our R&D Team and our experience in manufacturing pumps for the past 3 decades.  The pumps are manufactured as per IS 8034 and IS 9283. These pumps are manufactured with utmost care and perfection to give a trouble free and efficient performance.These pumps are manufactured with radial flow or mixed flow impellers according to the head and discharge. Internally mounted mechanical seals are used to reduce power consumption. The check valve housing and suction inter connector are made of graded cast iron. The pumps are built with gunmetal or SS impellers and cast iron or SS diffusers. These pumps are powered by rewindable water filled submersible motor suitable for continuous duty. The stator is wound with special water proof poly synthetic film, insulated copper winding wires and low watt loss steel stampings. Specially designed carbon bush high performance thrust bearings are used to withstand axial and down thrust loads. Dynamically balanced rotors are used to give vibration free and noise free operations and thus increase the efficiency and product life cycle. The motors must be filled with clear cold water before erection. The pump is used in bore sizes above 200 mm. These pumps are designed for wide voltage fluctuations.

Specification

Power Range9.3 kW – 26 kW ( 12.5 HP – 35 HP)
Speed2880 RPM
Version380- 415 V, Three Phase, 50 Hz, A.C. Supply
Maximum total head144 metre ( 14.4 bar)
Maximum flow rate126000 LPH (126.0 M3 / Hr)
Maximum Outer diameter in mm187 mm
Nominal outlet size in inches4
Minimum cooling flow along the motor0.16 m/sec
Degree of ProtectionIP 58
Direction of RotationClockwise from driving end.
Thrust Load3500 lbs
Type of DutyS1 (Continuous)
Method of startingSD
Maximum starts per hour4 times
Mounting StandardAs per NEMA standards


Salient Features

  • Easy to Install
  • Noiseless Operations.
  • Wet Type, Water Cooled, Rewind able Motors.
  • Suitable for wide Voltage fluctuations.
  • Can be easily dismantled and repaired.
  • Long life due to sturdy construction.
  • Dynamically balanced rotating parts.
·    Applications
 
  •  Agricultural Irrigation
  • Domestic
  • Civil water supply
  • Foundations
  • Industrial & Rural water supply
  • Fire Fighting
  • Water Circulation
  • High Rise Buildings.
  • Pressure boosting.

View Complete Details

Yes I'm interested

Borewell Submersible Pumpset
Interested in this product?
Get Best Quote
O.M.I  200mm ( 8”) Borewell Submersible pump is a product developed by the continuous efforts of our R&D Team and our experience in manufacturing pumps for the past 3 decades.  The pumps are manufactured as per IS 8034 and IS 9283. These pumps are manufactured with utmost care and perfection to give a trouble free and efficient performance.These pumps are manufactured with radial flow or mixed flow impellers according to the head and discharge. Internally mounted mechanical seals are used to reduce power consumption. The checkvalve housing and suction inter connector are made of graded cast iron. The pumps are built with gunmetal or SS impellers and cast iron or SS diffusers. These pumps are powered by rewindable water filled submersible motor suitable for continuous duty. The stator is wound with special water proof poly synthetic film, insulated copper winding wires and low watt loss steel stampings. Specially designed carbon bush high performance thrust bearings are used to withstand axial and down thrust loads. Dynamically balanced rotors are used to give vibration free and noise free operations and thus increase the efficiency and product life cycle. The motors must be filled with clear cold water before erection. The pump is used in bore sizes above 200 mm. These pumps are designed for wide voltage fluctuations.

Specification

Power Range 9.3 kW – 45 kW ( 12.5 HP – 60 HP)
Speed 2880 RPM
Version 380- 415 V, Three Phase, 50 Hz, A.C. Supply
Maximum total head 240 meter ( 24.0 bar)
Maximum flow rate 126000 LPH (126.0 M3 / Hr)  
Maximum Outer diameter in mm 187 mm
Nominal outlet size in inches 4
Minimum cooling flow along the motor 0.16 m/sec
Degree of Protection IP 58.
Direction of Rotation Clockwise from driving end.
Thrust Load 3500 lbs, 3.7kW to 11 kW, 6000 lbs. 15 kW,10000 lbs 22kW to 45 kW
Type of Duty S1 (Continuous)
Method of starting SD
Maximum starts per hour 4 times
Mounting Standard As per NEMA standards Key Type

Salient Features

  • Easy to Install
  • Noiseless Operations.
  • Wet Type, Water Cooled, Rewind able Motors.
  • Suitable for wide Voltage fluctuations.
  • Can be easily dismantled and repaired.
  • Long life due to sturdy construction.
  • Dynamically balanced rotating parts.
 Applications  
  • Agricultural Irrigation
  • Domestic
  • Civil water supply
  • Foundations
  • Industrial & Rural water supply
  • Fire Fighting
  • Water Circulation
  • High Rise Buildings.
  • Pressure boosting.

View Complete Details

Yes I'm interested

Borewell Submersible Pumps
Interested in this product?
Get Best Quote
O.M.I 100 mm (4”) Borewell Submersible pump is a product developed by the continuous efforts of our R&D Team and our experience in manufacturing pumps for the past 3 decades.  The pumps are manufactured as per IS 8034 and IS 9283. These pumps are manufactured with utmost care and perfection to give a trouble free and efficient performance.These pumps are manufactured with radial flow or mixed flow impellers according to the head and discharge. Internally mounted mechanical seals are used to reduce power consumption. The pumps are built with Noryl impellers and diffusers. The check valve housing and suction inter connector are made of graded cast iron. These pumps are powered by rewindable water filled submersible motor suitable for continuous duty. The stator is wound with special water proof poly synthetic film, insulated copper winding wires and low watt loss steel stampings. Specially designed carbon bush high performance thrust bearings are used to withstand axial and down thrust loads. Dynamically balanced rotors are used to give vibration free and noise free operations and thus increase the efficiency and product life cycle. The motors must be filled with clear cold water before erection. The pump set is used in bore sizes above 100 mm. These pumps are designed for wide voltage fluctuations.

Specification

Power Range0.37 kW – 3.7 kW (0.5HP-5 HP)
Speed2880 RPM
VersionSingle phase 200-240V, Three phase, 380 -415V, 50Hz, A.C Supply
Maximum total head310 meters (31 bar )
Maximum flow rate20000 LPH (20 M3 /Hr)
Maximum Outer diameter in mm96 & 98
Nominal outlet size in inches1¼,1½, 2 & 2½
Minimum cooling flow along the motor0.15 m/sec
Degree of ProtectionIP 58
Direction of RotationClockwise from driving end
Thrust Load1500 Ibs
Type of DutyS1 (continuous)
Method of startingDirect on Line, Capacitor Start Capacitor  Run (CSCR) / Permanent Split Capacitor (CSR)
Maximum starts per hour12 times
Mounting StandardAs per NEMA standards

Salient Features

  •  Light Weight
  •  Easy to Install
  • Noiseless Operations.
  • Wet Type, Water Cooled, Rewind able Motors.
  • Suitable for wide Voltage fluctuations.
  • Most of the models have ISI.
  • Single phase pumps with electrical panel board.
  • The pump is covered with SS jackets.
  • The motor uses half steel single piece body to reduce the OD to 96 mm, so that it    enter any bore hole
  • Can be easily dismantled and repaired
  • Pumps having 27 ft per stage are also available in certain models.  
  • Dynamically balanced rotating parts.

Applications
  • Agricultural Irrigation
  • Domestic
  • Civil water supply
  • Foundations
  • Industrial & Rural water supply
  • Lawn
  • Garden watering
  • Fire Fighting
  • Water Circulation
  • Pressure boosting and Ponds


Additional Information:

  • Item Code: OMR
  • Delivery Time: Immediate
  • Packaging Details: As Per Requirement.

View Complete Details

Yes I'm interested

Borewell Submersible Water Pumpset
Interested in this product?
Get Best Quote
O.M.I 150 mm (6”) Borewell Submersible pump is a product developed by the continuous efforts of our R&D Team and our experience in manufacturing pumps for the past 3 decades.  The pumps are manufactured as per IS 8034 and IS 9283. These pumps are manufactured with utmost care and perfection to give a trouble free and efficient performance.These pumps are manufactured with radial flow or mixed flow impellers according to the head and discharge. Internally mounted mechanical seals are used to reduce power consumption. The check valve housing and suction inter connector are made of graded cast iron. The pumps are built with gunmetal or SS impellers and cast iron or SS diffusers. These pumps are powered by rewindable water filled submersible motor suitable for continuous duty. The stator is wound with special water proof poly synthetic film, insulated copper winding wires and low watt loss steel stampings. Specially designed carbon bush high performance thrust bearings are used to withstand axial and down thrust loads. Dynamically balanced rotors are used to give vibration free and noise free operations and thus increase the efficiency and product life cycle. The motors must be filled with clear cold water before erection. The pump is used in bore sizes above 150 mm. These pumps are designed for wide voltage fluctuations.

Specification

Power Range 2.2 kW – 18.75 kW (3 HP – 25HP)
Speed 2880 RPM
Version 380 - 415V, Three Phase, 50 Hz, A.C. Supply
Maximum total head 300 meters (30 bar)
Maximum flow rate 68400 LPH (68.4 M3 / Hr)
Nominal outlet size in inches 1 ½, 2, 2 ½, 3
Minimum cooling flow along the motor 0.15 m/sec
Degree of Protection IP 58
Direction of Rotation Clockwise from driving end.
Thrust Load 1500 lbs. 1.1kW to 4.5kW, 3500 lbs, 5.5 kW to 15kW, 6000 lbs. 18kW to 26 kW.
Type of Duty S1 (Continuous)
Method of starting Single Phase, Capacitor Start and Capacitor run (CSCR)
Maximum starts per hour 12 times
Mounting Standard As per NEMA standards

Salient Features

  • Easy to Install
  • Noiseless Operations.
  • Wet Type, Water Cooled, Rewind able Motors.
  • Suitable for wide Voltage fluctuations.
  • Most of the models have ISI.
  • Can be easily dismantled and repaired
  • Pumps having 50 ft per stage are also available in certain models.  
  • Also available in Stainless Steel, Gun metal and Noryl materials.
  • Long life due to sturdy construction.
  • Single piece motor body improves motor life and reduces the     problem of miss alignment.
  • Dynamically balanced rotating parts.
Applications
 
  • Agricultural Irrigation
  • Domestic
  • Civil water supply
  • Foundations
  • Industrial & Rural water supply

View Complete Details

Yes I'm interested

V Guard Submersible Pumps
Interested in this product?
Get Best Quote
We are amongst the most reputed names in the industry, offering V Guard Submersible Pumps.

View Complete Details

Yes I'm interested

Submersible Water Pump
Interested in this product?
Get Best Quote

Submersible Water Pump

Get Latest Price

Submersible Water Pump manufacturer O.M.I  200mm ( 8”) Borewell Submersible pump is a product developed by the continuous efforts of our R&D Team and our experience in manufacturing pumps for the past 3 decades.  Submersible Water Pump manufacturer The pumps are manufactured as per IS 8034 and IS 9283. These pumps are manufactured with utmost care and perfection to give a trouble free and efficient performance.Submersible Water Pump manufacturer pumps are manufactured with radial flow or mixed flow impellers according to the head and discharge. Internally mounted mechanical seals are used to reduce power consumption. The checkvalve housing and suction inter connector are made of graded cast iron. The pumps are built with gunmetal or SS impellers and cast iron or SS diffusers.Submersible Water Pump manufacturer pumps are powered by rewindable water filled submersible motor suitable for continuous duty. The stator is wound with special water proof poly synthetic film, insulated copper winding wires and low watt loss steel stampings. Specially designed carbon bush high performance thrust bearings are used to withstand axial and down thrust loads. Dynamically balanced rotors are used to give vibration free and noise free operations and thus increase the efficiency and product life cycle. The motors must be filled with clear cold water before erection. The pump is used in bore sizes above 200 mm. These pumps are designed for wide voltage fluctuations.

View Complete Details

Yes I'm interested

Submersible Water Pumpset
Interested in this product?
Get Best Quote
Submersible Water Pumpset in India O.M.I  175mm to 200mm (7 - 8”) Borewell Submersible pump is a product developed by the continuous efforts of our R&D Team and our experience in manufacturing pumps for the past 3 decades.  The pumps are manufactured as per IS 8034 and IS 9283. These pumps are manufactured with utmost care and perfection to give a trouble free and efficient performance.Submersible Water Pumpset in india pumps are manufactured with radial flow or mixed flow impellers according to the head and discharge. Internally mounted mechanical seals are used to reduce power consumption. The check valve housing and suction inter connector are made of graded cast iron. The pumps are built with gunmetal or SS impellers and cast iron or SS diffusers. Submersible Water Pumpset in india pumps are powered by rewindable water filled submersible motor suitable for continuous duty. The stator is wound with special water proof poly synthetic film, insulated copper winding wires and low watt loss steel stampings. Specially designed carbon bush high performance thrust bearings are used to withstand axial and down thrust loads. Dynamically balanced rotors are used to give vibration free and noise free operations and thus increase the efficiency and product life cycle. The motors must be filled with clear cold water before erection. The pump is used in bore sizes above 200 mm. These pumps are designed for wide voltage fluctuations.

View Complete Details

Yes I'm interested

Borewell Submersible Pumpsets
Interested in this product?
Get Best Quote
O.M.I 150 mm (6”) Borewell Submersible pump is a product developed by the continuous efforts of our R&D Team and our experience in manufacturing pumps for the past 3 decades.  The pumps are manufactured as per IS 8034 and IS 9283. These pumps are manufactured with utmost care and perfection to give a trouble free and efficient performance.These pumps are manufactured with radial flow or mixed flow impellers according to the head and discharge. Internally mounted mechanical seals are used to reduce power consumption. The check valve housing and suction inter connector are made of graded cast iron. The pumps are built with gunmetal or SS impellers and cast iron or SS diffusers. These pumps are powered by rewindable water filled submersible motor suitable for continuous duty. The stator is wound with special water proof poly synthetic film, insulated copper winding wires and low watt loss steel stampings. Specially designed carbon bush high performance thrust bearings are used to withstand axial and down thrust loads. Dynamically balanced rotors are used to give vibration free and noise free operations and thus increase the efficiency and product life cycle. The motors must be filled with clear cold water before erection. The pump is used in bore sizes above 150 mm. These pumps are designed for wide voltage fluctuations.

Specification

Power Range 2.2 kW – 18.75 kW (3 HP – 25HP)
Speed 2880 RPM
Version 380 – 415V, Three Phase, 50 Hz, A.C. Supply
Maximum total head 300 meters (30 bar)
Maximum flow rate 68400 LPH (68.4 M3 / Hr)
Nominal outlet size in inches 1 ½, 2, 2 ½, 3
Degree of Protection IP 58.
Direction of Rotation Clockwise from driving end.
Thrust Load 1500 lbs. 1.1kW to 4.5kW, 3500 lbs, 5.5 kW to 15kW, 6000 lbs. 18kW to 26 kW.
Type of Duty S1 (Continuous)
Method of starting Single Phase, Capacitor Start and Capacitor run (CSCR),
Maximum starts per hour 12 times
Mounting Standard As per NEMA standards Key Type


Salient Features

  • Easy to Install
  • Noiseless Operations.
  • Wet Type, Water Cooled, Rewind able Motors.
  • Suitable for wide Voltage fluctuations.
  • Most of the models have ISI.
  • Can be easily dismantled and repaired
  • Pumps having 50 ft per stage are also available in certain models. 
  • Also available in Stainless Steel, Gun metal and Noryl materials.
  • Long life due to sturdy construction.
  • Single piece motor body improves motor life and reduces the problem of miss alignment.
  • Dynamically balanced rotating parts.
Applications
 
  • Agricultural Irrigation
  • Domestic
  • Civil water supply
  • Foundations
  • Industrial & Rural water supply
  • Fire Fighting
  • Water Circulation
  • High Rise Buildings.
  • Pressure boosting.

View Complete Details

Yes I'm interested
Tell us what you
need
Receive seller
details
Seal the deal
Save time! Get Best Deal
I agree to the terms and privacy policy