Osri Enterprises

• Capacitance Value: 2200 pF (picofarads), which is equivalent to 2.2nF or 0.0022µF.
• Voltage Rating: 2kV (2000 Volts DC), making it suitable for high-voltage circuits.
• Tolerance: ±5% (standard for "J" marking).
• Operating Temperature: Typically ranges from -55°C to +125°C for high-reliability film variants.
• Dielectric Material: Metalized Polyester film, often coated with flame-retardant epoxy resin

• Capacitance (225): The first two digits (22) are significant figures, and the third (5) is the multiplier (10^5) in picofarads. This equals 2,200,000 pF, or 2.2 µF.
• Tolerance (J): Represents a precision of ±5%. The actual capacitance will range between 2.09 µF and 2.31 µF.
• Voltage Rating (250V): The maximum safe operating voltage is 250V AC/DC. Exceeding this can lead to dielectric breakdown.
• Dielectric Material: Metallized Polyester (Mylar) film, known for good frequency stability and a long service life. 

The CBB22 is Polypropylene Film Radial Capacitor.

A Polypropylene Film Radial Capacitor is a type of electronic capacitor made using a dielectric material of polypropylene film. Capacitors are electrical components that store energy in an electric field, and they are commonly used in electronic circuits to filter, decouple, and stabilize voltage.

Polypropylene film capacitors are known for their excellent frequency stability, low dielectric losses, and high insulation resistance. They are widely used in electronic circuits such as power supplies, audio equipment, and other applications that require high performance and reliability.

• High-quality metallized polyester film construction
• Excellent stability and low dielectric loss
• High insulation resistance for reliable operation
• Compact size and easy through-hole mounting
• Economical and long-lasting design

• Capacitance: 0.01µF (10nF)
• Rated Voltage: 100V DC
• Tolerance: ±5% (J)
• Dielectric: Metallized Polyester Film
• Lead Pitch: 4 mm 
• Operating Temperature: −40°C to +85°C

• Body Shape: Rectangular, radial leads
• Body Length: 10 mm
• Body Height: 5 mm
• Body Thickness: 2.5 mm
• Lead Diameter: 0.5 mm (approx.)
• Lead Length: 20 mm
• Mounting Type: Through-hole
• Weight: 0.7 g

• Coupling and bypassing in signal circuits
• DC filtering in low-voltage power supplies
• Timing and waveform shaping circuits
• Noise suppression in small electronics

An aluminum electrolytic capacitor, often only called an electrolytic capacitor, uses aluminum metal as one electrode, covered with a very thin layer of aluminum oxide as dielectric, and which has an
the electrolyte as its second electrode.

Aluminum electrolytic capacitors are typically used in power supplies and DC-DC converters for smoothing and buffering rectified DC voltages in many electronic devices. They are also used in industrial power supplies. Aluminum electrolytic capacitors are polarized capacitors because of their
anodization principle. They can only be operated with DC voltage applied with the correct polarity.

Typical applications of aluminum electrolytic capacitors with non-solid electrolytes are

• Input and output decoupling capacitors for smoothing and filtering.
• DC-link capacitors in AC/AC converters for variable-frequency drive and frequency
  changers
• Correction capacitors for power factor correction

• Capacitance: 2.2uf / 2.2mf / 2200nf
• Tolerance: ±20% 
• Max Temperature: +85°C 
• Capacitor Diameter 4mm
• Capacitor Length 11mm
• Mount: Through Hole
• Package Type: Ammopack
• Useful life at 40°c 60,000 to 90,000 Hours Approx.
• Radial Electrolytic Capacitor

Package includes: 10 x 2.2uF/63V Radial Electrolytic Capacitor

Features:

1. Capacitance: 4.7 µF with ±20 % tolerance.
2. Voltage rating: 63 V DC suitable for various low-voltage circuits.
3. Compact size: 5 mm diameter × 11 mm height (radial leaded form).
4. Operates from –40 °C to 105 °C for reliability in varied conditions.
5. Through-hole radial design makes soldering and replacement straightforward.
6. Lightweight (~4 g) ensures easy integration on PCBs.
7. Aluminum electrolytic type provides good energy density and filtering performance.
8. RoHS compliant  safe for modern manufacturing and eco-friendly use.

63YXJ22M5X11-Rubycon-22uF 63V ±20% Plugin,D5xL11mm Aluminum Electrolytic Capacitors – Leaded ROHS.22uF 63V ±20% Plugin,D5xL11mm Aluminum Electrolytic Capacitors – Leaded ROHS

Capacitance: 22uF
Rated Voltage: 63V
φD: 5mm
L: 11mm
Equivalent Series Resistance(ESR): –
Lead Spacing: 2mm
Tolerance: ±20%

Additional Information:

• Packaging Details: BAG PACK

• Capacitance: 47uF / 47mf
• Voltage: 63V
• Tolerance: ±15% 
• Max Temperature: +85°C 
• Dimension: 6.3 x 11mm
• Radial Electrolytic Capacitor
• Lead Spacing/Pitch: 2.5mm
• Ripple Current: 181 mA rms
• Leakage Current: 3 uA
• Mount: Through Hole
• Brand/Make: Samwha or Industrial standard brand
• Case/Package: AmmoPack
• RoHS Compliant

Package includes: 5 x 47uF/63V (6.3 x 11mm) Radial Electrolytic Capacitor [47mf / 63v]

100uF/25V Radial Electrolytic Capacitor

Features

• Low Leakage Current
• Wide Operating Temperature Range
• Long Life

Specifications:

• Dimensions : Body Height - 12mm, Body Diameter - 6mm
• Pin Spacing: 2.5mm
• Capacitance: 100uf / 100mf / 100mfd
• Voltage: 25v
• Mount: Through Hole
• Package Type: Ammopack
• Tolerance: 20 %
• Temperature: + 105 degree C
• Ripple Current: 181 mA rms

100uF/50V Radial Electrolytic Capacitor

Features

• Low Leakage Current
• Wide Operating Temperature Range
• Long Life
• High Quality

Specification

• Capacitor: 100uF / 100mf
• Voltage: 50V
• Tolerance: ±20%
• Max Temperature: +105°C
• Size: 8x12mm
• Pitch (Lead Space) : 5mm
• Ripple Current:1937 mA rms
• Package Type: Ammopack
• Radial Electrolytic Capacitor
• Brand/Make: Elite or Industrial standard brand

Package includes: 4 X 100uF 50V (100mf / 50v) Radial Electrolytic Capacitor

00uF/63V Radial Electrolytic Capacitor (pack of 5)

Features

• Low Leakage Current
• Wide Operating Temperature Range
• Long Life
• High Quality

Specifications

• Capacitance            : 100uF / 100mf
• Voltage Rating DC  : 63V
• Tolerance                : 15%
• Lead Spacing          : 5 mm
• Mounting                : THT
• Leakage Current    : 3 uA
• Dimensions            : 10 x 12.5 mm
• Compliance            : RoHS
• Max Temperature : 105°C 
• Type: Radial Electrolytic Capacitor

Package Includes: 5 x 100mf 63v Radial Electrolytic Capacitor

100uF 100V Radial Electrolytic Capacitor

This 100µF 100V radial electrolytic capacitor is a general-purpose component designed for high-voltage filtering, smoothing, and energy storage in power supplies and electronic circuits. With a compact cylindrical body and standard 5mm lead pitch, it is well-suited for through-hole PCB mounting. The capacitor supports a ripple current of up to 350mA and has an operating lifetime of 2000 hours at +105°C.

Key Features & Benefits:

• Rated for 100V DC: Ideal for medium to high-voltage applications.

• Stable Capacitance: 100µF for effective noise suppression and voltage smoothing.

• Standard Radial Lead Format: 5mm pitch for easy integration into PCBs.

• Durable Construction: Rated for 2000 hours at +105°C for long-lasting performance.

• Ripple Current Capacity: Handles up to 350mA, suitable for moderately loaded power circuits.

Specifications:

• Capacitance: 100µF

• Rated Voltage: 100V DC

• Capacitor Type: Radial Electrolytic

• Dimensions: 16mm (Height) × 10mm (Diameter)

• Lead Pitch: 5mm

• Tolerance: ±20%

• Ripple Current: 350mA (at 100kHz, 105°C)

• Lifetime: 2000 hours @ 105°C

• Operating Temperature Range: -40°C to +105°C

• Polarity: Polarized (negative lead marked)

• RoHS Compliant: Yes

Applications:

• Power supply output filtering

• DC blocking and bypassing

• Audio amplifier smoothing

• General-purpose electronics

• Consumer and industrial control circuits

100uF/160V Radial Electrolytic Capacitor

Features

• Low Leakage Current
• Wide Operating Temperature Range
• Long Life
• High Quality

Specifications:

• Capacitance: 100uf / 100mf / 100mfd
• Voltage: 160v
• Size: 23 x 10 mm 
• Pitch (Lead spacing): 5mm
• Type: Radial Electrolytic
• Mounting Type: Through Hole
• Tolerance: +/- 20%
• Temperature: -40 to +80 Degree C
• Lifetime: 2000h
• Ripple Current: 350ma

An aluminum electrolytic capacitor, often only called an electrolytic capacitor, uses aluminum metal as one electrode, covered with a very thin layer of aluminum oxide as dielectric, and which has an
the electrolyte as its second electrode.

Aluminum electrolytic capacitors are typically used in power supplies and DC-DC converters for smoothing and buffering rectified DC voltages in many electronic devices. They are also used in industrial power supplies. Aluminum electrolytic capacitors are polarized capacitors because of their
anodization principle. They can only be operated with DC voltage applied with the correct polarity.

Typical applications of aluminum electrolytic capacitors with non-solid electrolytes are

• Input and output decoupling capacitors for smoothing and filtering.
• DC-link capacitors in AC/AC converters for variable-frequency drive and frequency
  changers
• Correction capacitors for power factor correction

• Capacitance                : 220uF / 220mf
• Voltage Rating DC       : 25V
• Tolerance                   : 15%
• Lead Spacing              : 5 mm
• Mounting                    : THT
• Leakage Current          : 3 uA
• Dimensions                 : 10 x 12.5 mm
• Compliance                 : RoHS
• Max Temperature         : 105°C 
• Type: Radial Electrolytic Capacitor

• Capacitance                 : 220uF/ 220mf
• Voltage Rating DC        : 35 V
• Tolerance                    : 20%
• Ripple Current             : 796 mA rms
• Lead Spacing              : 5 mm
• Mounting                    : THT
• Leakage Current          : 3 uA
• Dimensions                 : 10 x 12.5 mm
• Compliance                 : RoHS
• Max Temperature         : 105°C 
• Type: Radial Electrolytic Capacitor

• Capacitance                 : 470uF/ 470mf
• Voltage Rating DC        : 16 V
• Tolerance                    : 15%
• Lead Spacing              : 4 mm
• Mounting                    : THT
• Leakage Current          : 3 uA
• Dimensions                 : Dia-7.5mm x Length-12.5 mm
• Compliance                 : RoHS
• Max Temperature         : 105°C 
• Type: Radial Electrolytic Capacitor

The 220µF 450V Radial Electrolytic Capacitor is a high-voltage, high-reliability component designed for power supply filtering, energy storage, and industrial applications. With a 450V rating, it is ideal for high-voltage power circuits, inverters, and motor drives.

• High Voltage Rating (450V) – Suitable for high-voltage power supply and energy storage applications.
• Large Capacitance (220µF) – Provides excellent filtering and voltage stabilization.
• High-Temperature Durability (105°C Rated) – Ensures long operational life and thermal stability.
• Low ESR & High Ripple Current Handling – Improves circuit efficiency and reduces power losses.
• Radial Lead Design (Pitch 10mm) – Easy PCB mounting for through-hole applications.

• Capacitance: 220µF
• Voltage Rating: 450V
• Tolerance: ±20%
• Temperature Rating: 105°C
• ESR (Equivalent Series Resistance): Low ESR for improved performance
• Lead Spacing (Pitch): 10mm
• Diameter: 32mm
• Height: 35mm
• Mounting Type: Through-Hole (Radial)
• Applications: Power supply filtering, energy storage, industrial electronics, inverters, and motor drives

• Capacitance: 330uf / 330mf 
• Voltage: 25V
• Tolerance: 15% 
• Max Temperature: 85 C Degree
• Type: Radial Electrolytic Capacitor
• Dimension: 8x11.5 mm
• Pitch / Lead Spacing: 3.5 mm
• Compliance: RoHS
• Package: Ammopack
• Make: Digicap / Samwha (depend on availability)

• Capacitance: 470uF / 470mf
• Voltage: 25V
• Tolerance: ±15%
• Size: 10x12mm
• Pitch (lead spacing): 5mm
• Radial Electrolytic Capacitor
• Max temperature: 85 C
• Brand/Make: Samwha or Keltron or Industrial standard brand

This 470uF 35V radial electrolytic capacitor is a high-quality general-purpose capacitor designed for reliable filtering, decoupling, and energy storage applications. With a compact size of 10x12mm and a 5mm lead pitch, it is ideal for use in power supplies, DC-DC converters, and electronic circuits requiring stable voltage and ripple reduction.

Specifications

• Capacitance: 470µF

• Rated Voltage: 35V DC

• Type: Radial Electrolytic Capacitor

• Dimensions: 10mm (diameter) x 12mm (height)

• Lead Pitch: 5mm

• Tolerance: ±20%

• Temperature Range: -40°C to +105°C

• Applications: Power filtering, energy storage, coupling/decoupling

Applications

• Power supply smoothing and filtering

• DC-DC converters and regulators

• Audio amplifier circuits

• General electronic devices and projects

• Capacitance: 22uF / 22mf
• Voltage: 450V
• Tolerance: ±15% 
• Max Temperature: +105°C 
• Radial Electrolytic Capacitor
• Ripple Current @ Low Frequency :38mA @ 120Hz
• Ripple Current @ High Frequency :60.8mA @ 10kHz
• Lead Spacing :0.197" (5.00mm)
• Size / Dimension :12mm
• Height - Seated (Max) :25mm

Additional Information:

• Packaging Details: bag package

• Capacitance: 4.7uF / 4.7mf
• Voltage: 250V
• +85°C Max Temperature
• Radial Electrolytic Capacitor
• Tolerance: 20%
• Dimension: 8mm x 12mm

• Capacitance: 47uF / 47mf
• Voltage: 25V
• Tolerance: ±15% 
• +85°C Max Temperature
• Radial Electrolytic Capacitor

• Capacitance: 47uF / 47mf
• Voltage: 450V
• Tolerance: ±15%
• Max Temperature: +105°C
• Type: CD81
• Dimension: 16 x 25mm
• Pitch/Lead spacing: 7.5mm
• Make/Brand: VENT / JAYE (Original)
• RoHS Compliant 
• Radial Electrolytic Capacitor

• Capacitance: 4700uF / 4700mf
• Voltage: 25V
• Tolerance: ±15% 
• +105°C Max Temperature
• Dimension: 16 x 25mm
• Radial Electrolytic Capacitor

• Capacitance: 4700uF / 4700mf
• Voltage: 35V
• Tolerance: ±15% 
• Size: 16 x 35mm
• Lead Spacing (Pitch): 7.5mm
• Temperature: +85°C Max 
• Type: Radial Electrolytic Capacitor
• 4700uF/35V Radial Electrolytic Capacitor Features
  • Capacitance: 4700uF / 4700mf
  • Voltage: 35V
  • Tolerance: ±15% 
  • Size: 16 x 35mm
  • Lead Spacing (Pitch): 7.5mm
  • Temperature: +85°C Max 
  • Type: Radial Electrolytic Capacitor
  • 4700uF/35V Radial Electrolytic Capacitor Features
    • Capacitance: 4700uF / 4700mf
    • Voltage: 35V
    • Tolerance: ±15% 
    • Size: 16 x 35mm
    • Lead Spacing (Pitch): 7.5mm
    • Temperature: +85°C Max 
    • Type: Radial Electrolytic Capacitor

An aluminum electrolytic capacitor, often use only called an electrolytic capacitor, uses aluminum metal as one electrode, covered with a very thin layer of aluminum oxide as dielectric, and which has an
the electrolyte as its second electrode.

Aluminum electrolytic capacitors are typically used in power supplies and DC-DC converters for smoothing and buffering rectified DC voltages in many electronic devices. They are also used in industrial power supplies. Aluminum electrolytic capacitors are polarized capacitors because of their
anodization principle. They can only be operated with DC voltage applied with the correct polarity.

Typical applications of aluminum electrolytic capacitors with non-solid electrolytes are

• Input and output decoupling capacitors for smoothing and filtering.
• DC-link capacitors in AC/AC converters for variable-frequency drive and frequency
  changers
• Correction capacitors for power factor correction

• Capacitance: 2200uF / 2200mf 
• Voltage: 25V
• Tolerance: 20% 
• Max Temperature: 85 C Degree
• Type: Radial Electrolytic Capacitor
• Dimension: 12.5x20 mm
• Pitch / Lead Spacing: 7.5 mm
• Leakage Current: 3 uA
• Compliance: RoHS
• Package: Ammopack
• Make: Digicap / Samwha (depend on availability)

• Capacitance: 2200uF / 2200mf 
• Voltage: 50V
• Tolerance: 20% 
• Max Temperature: 105 C Degree
• Type: Radial Electrolytic Capacitor
• Dimension: 16x30 mm
• Pitch / Lead Spacing: 7.5 mm
• Leakage Current: 3 uA
• Compliance: RoHS
• Package: Ammopack

An aluminum electrolytic capacitor, often only called an electrolytic capacitor, uses aluminum metal as one electrode, covered with a very thin layer of aluminum oxide as dielectric, and which has an

the electrolyte as its second electrode.

Aluminum electrolytic capacitors are typically used in power supplies and DC-DC converters for smoothing and buffering rectified DC voltages in many electronic devices. They are also used in industrial power supplies. Aluminum electrolytic capacitors are polarized capacitors because of their

anodization principle. They can only be operated with DC voltage applied with the correct polarity.

• Item part number :104
• Value    0.1uF | 100NF | 100000PF
• Voltage (Max)    50 Volts
• Type    Ceramic
• Pitch    5 mm
• Tolerance    ± 20%