Osri Enterprises

Current	3 A
Voltage	100 V
Mounting Type	Through Hole
No of Pins	2 Pins
Usage	Electronic Use
Part No	IN5408
Color	BLACK

Diode Type	Rectifier Diode
Current	10A
Forward Current	10 A
Material	Silicone
No of Pins	2 Pins
Mounting Type	Through Hole
Part Number	10A10
Usage	Electronic Use
Part No	10A10
Color	BLACK
Maximum forward voltage at 10A DC	1

10A05 THRU 10A10 GENERAL PURPOSE PLASTIC RECTIFIERS Reverse Voltage – 50 to 1000 Volts Forward Current – 10.0 Amperes Features • Low cost • Diffused junction • Low forward voltage drop • Low reverse leakage current •High current capability • The plastic material carries UL recognition 94V-0 Mechanical Data •Case: JEDEC R-6 molded plastic •Polarity: Color band denotes cathode •Mounting position: Any Absolute Maximum Ratings and CharacteristicsRatings at 250C ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load.. For capacitive load, derate current by 20%. Symbols10A05 10A110A2 10A4 10A6 10A8 10A10 Units Maximum repetitive peak reverse voltage VRRM 50 100200400 600 800 1000VoltsMaximum RMS voltage VRMS 35 70 140280 420 560 700 VoltsMaximum DC blocking voltage VDC50 100200400 600 800 1000VoltsMaximum average forward rectified current @TA=50 OCIF(AV) 10 AmpsPeak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC method) IFSM 600 AmpsMaximum forward voltage at 10A DC VF 1 VoltsMaximum DC reverse current @TJ = 25 OC at rated DC blocking voltage @TJ = 100OC IR10 100 μA Typical junction capacitance (Note 1) CJ 150 pF Typical thermal resistance (Note 2) RθJA10 OC/WOperating temperature range TJ -55 to+125 OCStorage temperature range TS -55 to+150 OC Notes: 1. Measured at 1 MHZ and applied reverse voltage of 4V D.C. 2. Thermal Resistance Junction to Ambient.

Current	4 A
Voltage	600 V
Material	Silicone
Mounting Type	Through Hole
No of Pins	2 Pins
Usage	Electronic Use
Part No	MUR460

Reverse Voltage	45 V
Forward Current	20 A
Package Type	TO-220AB
Diode Configuration	Dual Common Cathode
Forward Voltage	0.5 V
Mounting Type	Through Hole
Operating Temperature	-40 to 125 C
Brand	ON Semiconductor
Surge Capacity	150 A

The MBR2045CTG is a high-efficiency Schottky barrier power rectifier, primarily designed by onsemi for use in switch-mode power supplies and high-frequency rectification. It features a dual common cathode configuration housed in a TO-220AB package, capable of handling a total average rectified current of 20 A

Reverse Voltage	1000 V
Forward Current	1 A
Recovery Time	50 ns
Package/Case	DO-214AC(G)
Mounting Type	Surface Mount
Application	UPS, Motor Drive, SMPS, Inverter
Polarity	Anode Marked
BRAND	Hottech

The US1M is an industry-standard 1A, 1000V surface-mount ultrafast recovery rectifier diode. Housed in a DO-214AC (SMA) package, it is widely used in high-frequency rectification, inverters, and power supplies due to its low power loss, high-efficiency switching, and low forward voltage.