X

Pankh Stainless (India)

Salkia, Kolkata, West Bengal

| GST  19ALXPJ8247J1Z5

is a member of IndiaMART

| Verified Supplier

|

★★★★★
★★★★★
View Mobile Number 35% Response Rate

Stainless Steel Pipe And Bar

We are engaged in manufacturing, supplying, trading, wholesaling, dealing, retailing and stocking Stainless Steel Pipe Fittings, Stainless Steel Pipe, Stainless Steel Bar, Stainless Steel Beam and many more. Our products are of world class quality.

We PANKH STAINLESS(INDIA), are one of the Leading, manufactures & suppliers of Pipe Fittings. Products of Pipe Fittings  Pipe Adapters  Pipe Caps and Plugs  Pipe Couplings  Pipe Crosses  Pipe Elbows  Pipe Nipples  Pipe Reducers  Pipe Tees   Material Grades :- Stainless Steel Pipe Fittings:- ASTM A182 F304, F304H, F304L, F304N, F304LN, F309H, F310, F310H, F316, F316H, F316L, F316N, F316LN, F317, F317L, F321, F321H, F347, F347H, F904L  Alloy Steel Pipe Fittings:- ASTM A182 F1, F5, F 5a, F9, F91, F11 Class 1, F12 Class 1, F22 Class 1 Carbon Steel Pipe Fittings:- ASTM A234 Grade WPC, WPB, ASTM A420 WPL6, ASTM A860 WPHY 46, WPHY 42, WPHY 60, WPHY 52, WPHY 65, WPHY 70. Hastelloy Pipe Fittings:- Hastelloy C-276 (UNS No N10276), C-4 (UNS No N06455), Hastelloy C 2000 and Hastelloy C 22 (UNS No N06022) Monel Pipe Fittings:- Monel 400 (UNS No N04400) and Monel 500 (UNS No N05500) Duplex Steel Elbow:- ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Werkstoff No. 1.4462 Nickel Alloy Elbow:- ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 ) Please contact us for more details.
View More

View more details

Sheet metal is metal formed by an industrial process into thin, flat pieces. It is one of the fundamental forms used in metalworking and it can be cut and bent into a variety of shapes. Countless everyday objects are fabricated from sheet metal. Thicknesses can vary significantly; extremely thin thicknesses are considered foil or leaf, and pieces thicker than 6 mm (0.25 in) are considered plate. Sheet metal is available in flat pieces or coiled strips. The coils are formed by running a continuous sheet of metal through a roll slitter
View More

View more details

pipe is a tubular section or hollow cylinder, usually but not necessarily of circular cross-section, used mainly to convey substances which can flow — liquids and gases (fluids), slurries, powders and masses of small solids. It can also be used for structural applications; hollow pipe is far stiffer per unit weight than solid members.
View More

View more details

pipe is a tubular section or hollow cylinder, usually but not necessarily of circular cross-section, used mainly to convey substances which can flow — liquids and gases (fluids), slurries, powders and masses of small solids. It can also be used for structural applications; hollow pipe is far stiffer per unit weight than solid members.
View More

View more details

A fastener is a hardware device that mechanically joins or affixes two or more objects together. In general, fasteners are used to create non-permanent joints; that is, joints that can be removed or dismantled without damaging the joining components. Welding is an example of creating permanent joints. Fasteners can also be used to close a container such as a bag, a box, or an envelope; or they may involve keeping together the sides of an opening of flexible material, attaching a lid to a container, etc. There are also special-purpose closing devices, e.g. a bread clip.
View More

View more details

flange is an external or internal ridge, or rim (lip), for strength, as the flange of an iron beam such as an I-beam or a T-beam; or for attachment to another object, as the flange on the end of a pipe, steam cylinder, etc., or on the lens mount of a camera; or for a flange of a rail car or tram wheel. Thus flanged wheels are wheels with a flange on one side to keep the wheels from running off the rails. The term "flange" is also used for a kind of tool used to form flanges. Pipes with flanges can be assembled and disassembled easily.
View More

View more details

raw material, also known as a feedstock or most correctly unprocessed material, is a basic material that is used to produce goods, finished products, energy, or intermediate materials which are feedstock for future finished products. As feedstock, the term connotes these materials are bottleneck assets and are highly important with regards to producing other products. An example of this is crude oil, which is a raw material and a feedstock used in the production of industrial chemicals, fuels, plastics, and pharmaceutical goods; lumber is a raw material used to produce a variety of products including furniture
View More

View more details

Grab bars are safety devices designed to enable a person to maintain balance, lessen fatigue while standing, hold some of their weight while maneuvering, or have something to grab onto in case of a slip or fall. A caregiver may use a grab bar to assist with transferring a patient from one place to another. A worker may use a grab bar to hold on to as he or she climbs, or in case of a fall.
View More

View more details

Pipe fittingorpipe fittingis the occupation of installing or repairingpipingortubingsystems that convey liquid, gas, and occasionally solid materials. This work involves selecting and preparing pipe or tubing, joining it together by various means, and the location and repair of leaks. Pipe fitting work is done in many different settings:HVAC,manufacturing,hydraulics,refineries,nuclear-poweredsupercarriersandfast-attack submarines,computer chipfabrication plants,power plantconstruction, and othersteamsystems. Pipe fitters (sometimes called simply "fitters") are represented in the USA and Canada by theUnited Association of Journeymen and Apprentices of the Plumbing and Pipe Fitting Industry of the United States and Canada. Pipefitterswork with a variety of pipe and tubing materials including several types of steel, copper, iron, aluminium, and plastic. Pipe fitting is notplumbing; the two are related but separate trades. Pipe fitters who specialize in fire prevention are calledSprinklerfitters, another related, but separate trade.
View More

View more details

Plate may refer to a range of objects, which have in common being thin and flat and also food or other products can be set on them.
View More

View more details

We are remarkable entity, engaged in offering superior assortment of Fitting & Gasket that is fabricated in compliance with international quality standards under the guidance of experienced professionals. Our offered products are available in various pattern, sizes, designs and thickness. Further, these products are can be availed in various specifications and can be customized as per the application requirements of the clients within stipulated time-frame. Owing to high quality features, these are widely demanded in the market. Features: High tensile strength Superior strength Precise engineered
View More

View more details

tube, or tubing, is a long hollow cylinder used for moving fluids (liquids or gases) or to protect electrical or optical cables and wires. The terms "pipe" and "tube" are almost interchangeable, although minor distinctions exist — generally, a tube has tighter engineering requirements than a pipe. Both pipe and tube imply a level of rigidity and permanence, whereas a hose is usually portable and flexible. A tube and pipe may be specified by standard pipe size designations, e.g., nominal pipe size, or by nominal outside or inside diameter and/or wall thickness. The actual dimensions of pipe are usually not the nominal dimensions: A 1-inch pipe will not actually measure 1 inch in either outside or inside diameter, whereas many types of tubing are specified by actual inside diameter, outside diameter, or wall thickness.
View More

View more details

Welding is a fabrication or sculptural process that joins materials, usually metals or thermoplastics, by causing fusion, which is distinct from lower temperature metal-joining techniques such as brazing and soldering, which do not melt the base metal. In addition to melting the base metal, a filler material is typically added to the joint to form a pool of molten material (the weld pool) that cools to form a joint that is usually stronger than the base material. Pressure may also be used in conjunction with heat, or by itself, to produce a weld. Although less common, there are also solid state welding processes such as friction welding or shielded active gas welding in which metal does not melt. Some of the best known welding methods include: Oxy-fuel welding - also known as oxyacetylene welding or oxy welding, uses fuel gases and oxygen to weld and cut metals. Shielded metal arc welding (SMAW) – also known as "stick welding or electric welding", uses an electrode that has flux around it to protect the weld puddle. The electrode holder holds the electrode as it slowly melts away. Slag protects the weld puddle from atmospheric contamination. Gas tungsten arc welding (GTAW) – also known as TIG (tungsten, inert gas), uses a non-consumable tungsten electrode to produce the weld. The weld area is protected from atmospheric contamination by an inert shielding gas such as argon or helium. Gas metal arc welding (GMAW) – commonly termed MIG (metal, inert gas), uses a wire feeding gun that feeds wire at an adjustable speed and flows an argon-based shielding gas or a mix of argon and carbon dioxide (CO2) over the weld puddle to protect it from atmospheric contamination. Flux-cored arc welding (FCAW) – almost identical to MIG welding except it uses a special tubular wire filled with flux; it can be used with or without shielding gas, depending on the filler. Electroslag welding (ESW) – a highly productive, single pass welding process for thicker materials between 1 inch (25 mm) and 12 inches (300 mm) in a vertical or close to vertical position.  
View More

View more details

Pipe fitting or pipefitting is the occupation of installing or repairing piping or tubing systems that convey liquid, gas, and occasionally solid materials. This work involves selecting and preparing pipe or tubing, joining it together by various means, and the location and repair of leaks.
View More

View more details

roof is part of a building envelope. It is the covering on the uppermost part of a building or shelter which provides protection from animals and weather, notably rain or snow, but also heat, wind and sunlight. The word also denotes the framing or structure which supports that covering.The characteristics of a roof are dependent upon the purpose of the building that it covers, the available roofing materials and the local traditions of construction and wider concepts of architectural design and practice and may also be governed by local or national legislation. In most countries a roof protects primarily against rain. A verandah may be roofed with material that protects against sunlight but admits the other elements. The roof of a garden conservatory protects plants from cold, wind, and rain, but admits light. A roof may also provide additional living space, for example a roof garden.
View More

View more details

Monal Scrap consists of recyclable materials left over from product manufacturing and consumption, such as parts of vehicles, building supplies, and surplus materials. Unlike waste, scrap has monetary value, especially recovered metals, and non-metallic materials are also recovered for recycling.
View More

View more details

wire is a single, usually cylindrical, flexible strand or rod of metal. Wires are used to bear mechanical loads or electricity and telecommunications signals. Wire is commonly formed by drawing the metal through a hole in a die or draw plate. Wire gauges come in various standard sizes, as expressed in terms of a gauge number. The term wire is also used more loosely to refer to a bundle of such strands, as in "multistranded wire", which is more correctly termed a wire rope in mechanics, or a cable in electricity. Wire comes in solid core, stranded, or braided forms. Although usually circular in cross-section, wire can be made in square, hexagonal, flattened rectangular, or other cross-sections, either for decorative purposes, or for technical purposes such as high-efficiency voice coils in loudspeakers. Edge-wound coil springs, such as the Slinky toy, are made of special flattened wire.
View More

View more details

Within industry, piping is a system of pipes used to convey fluids (liquids and gases) from one location to another. The engineering discipline of piping design studies the efficient transport of fluid. Industrial process piping (and accompanying in-line components) can be manufactured from wood, fiberglass, glass, steel, aluminum, plastic, copper, and concrete. The in-line components, known as fittings, valves, and other devices, typically sense and control the pressure, flow rate and temperature of the transmitted fluid, and usually are included in the field of Piping Design (or Piping Engineering). Piping systems are documented in piping and instrumentation diagrams (P&IDs). If necessary, pipes can be cleaned by the tube cleaning process.
View More

View more details

Use these safety checklists to help identify potential hazards at work. The questions are based on applicable OSHO Safety standards. The checklists can help you determine corrective measures that may be needed to help eliminate hazards and keep you in compliance with critical workplace safety regulations. Fire Extinguisher Safety Shoe Safety Jacket Safety Belt Safety Helmet Welding Helmet Safety Googles Gumboot Road Divider Traffic Cone Construction Helmet Fire Fighting Equipment Fire Hydrant Systems Fire Alarm
View More

View more details

Bar, also colloquially known as billet, is a common form of raw purified metal, used by industry to manufacture metal parts and products.
View More

View more details

Plastic pipe is a tubular section, or hollow cylinder, made of plastic. It is usually, but not necessarily, of circular cross-section, used mainly to convey substances which can flow — liquids and gases (fluids), slurries, powders and masses of small solids. It can also be used for structural applications; hollow pipes are far stiffer per unit weight than solid members. Plastic pipework is used for the conveyance of drinking water, waste water, chemicals, heating fluid and cooling fluids, foodstuffs, ultra-pure liquids, slurries, gases, compressed air and vacuum system applications
View More

View more details

In masonry veneer building construction, a shelf angle or masonry support is a steel angle which supports the weight of brick or stone veneer and transfers that weight onto the main structure of the building so that a gap or space can be created beneath to allow building movements to occur.
View More

View more details

Manufacturer of a wide range of products which include Cable Joining Kit.
View More

View more details

Get in touch with us

Reach Us

Pankh Stainless (India) ★★★★★ ★★★★★ /5 ★★★★★ ★★★★★ 5★ 4★ 3★ 2★ 1★ 28/2, Bhairab Dutta Lane, Golabari Howrah District, Salkia, Kolkata-700001, West Bengal, India

Sanjay Jain (Proprietor)

View Mobile Number35% Call Response Rate

Send SMS
Send Email

We Accept Online Payments

Leave a Message, we will call you back!
I agree to the terms and privacy policy
© Pankh Stainless (India). All Rights Reserved (Terms of Use)