Pompay Engineering Industries

• Inverter based with latest soft technology.
• Micro controller based for precise control.
• 2 / 4 Step Mode.
• Arc length adjustment function.
• Adjustable crater voltage and crater current.
• Adjustable Burn Back Time.
• Suitable for different kind of base metals.
• High energy efficient and high power factor.
• Can work in Single / Double Pulse mode.
• Special 4 Step mode for delivery of high curing during start.
• Adjustable Arc force.
• Adjustable Pre /Post gas flow time.
• Spot Welding function.

Strip cladding is a fusion welding process in which weld metal strip is fused on the surface. This process is normally used in pressure vessel manufacturing where corrosion resistant inner surface is required. We offer strip cladding system with inverter based welding power source along with strip cladding head. Power sources are available in 1000,1600 and 2000 Amps to suit different strip sizes

• IGBT inverter based with latest Soft switching technology
• Higher operating frequency and hence low volume and weight.
• Higher efficiency and power factor.
• CC/CV type and hence can be used for carbon arc gouzing.
• Microprocessor based system and hence precise control of parameter.
• Digital display for voltage and current.
• Can be used in ESSC and SAW process.
• Memory channels to store the data.
• Wire feed stops automatically if the wire/strip touches job while inching.
• Strip cladding head suitable for 30 ~ 60 mm wide strips.
• Water cooling provision provided for the head.

INARC 250 IH is IGBT based arc welding power source. This employs IGBT module in full bridge topology. These machines are widely used for manual metal arc welding with acid, basic electrodes.

• IGBT Module with fully bridge topology
• Easy arc striking & stable arc
• Digital Display of current
• Precise Preset of current
• High Power factor
• High Switching frequency,hence low volume & weight
• Adjustable arc force

INARC 400 IS is IGBT based arc welding power source. This employs IGBT module in full bridge topology. These machines are widely used for manual metal arc welding with acid , basic electrodes

• IGBT Module with full bridge topology
• Easy arc striking & stable arc
• Digital Display of current with precise preset function
• Precise preset of current
• High Power factor
• High Switching frequency , Hence low volume and weight
• Adjustable arc Force.
• Can be used with extended welding cable.
• Standard Remote facility is available

INTIG-AC/DC Series machines are microprocesser controlled fully digital IGBT inverter based arc welding power source with soft switching technology. They are widely used for DC TIG, DC PULSE TIG / AC Square wave TIG and AC Square Wave Pulse TIG welding in various metals including Al. and Mg alloy.

Features :

• Advanced Soft Switching technology, hence more reliability.
• Micro controller based technology for precise setting of welding parameters.
• Under voltage, Over Voltage, Phase absence and over heat protection.
• Digital preset of all welding parameters.
• Memory channels to store parameters.
• High efficiency, Better power factor.
• Light Weight but high duty cycle.
• Built in High Frequency..
• Gas Check Facility.
• 2/4 Step function.

INTIG-ID Series machines are microprocessor controlled fully Digital lGBT Inverter based arc welding power source with soft switching technology. They are widely used for DC MMA, DC TIG welding In mild steel, alloy steel, stainless steel, copper & Titanium.

• Advanced technology,hence more reliability
• Micro controller based technology for precise setting of welding parameters
• Under voltage, Over voltage, Phase absence and over heat protection.
• Digital preset of all welding parameters.
• High Efficiency, Better power factor.
• Light Weight but high duty cycle.
• Built in High Frequency.
• 2/4 Step function.
• Recommended Thickness On Trolley

INARC-i Series MAchines are IGBT inverter based arc welding power source with soft switching technology. They are widely used for manual metal arc welding with acid and basic electrodes.

• Advance Soft Switching inverter technology and high efficiency.
• Easy arc striking and stable arc
• Digital display of current with precise preset function.
• Digital display of voltage with selector switch
• High Power factor
• High Switching frequency, hence low volume and weight.
• Adjustable arc force.
• Can be used with extended welding cable.
• Wireless remote control option.
• Carbon arc gouging possible in models beyond 600 Amps.
• Wired & Wireless Remote Controller.
• Wired Remote Controller with digital display of current.
• Power Source with Wheels

INMIG-i Series welders are Semi-Automatic Gas Sheilded Metal arc Welding machines with advanced wave control technology. Machines are available in 400/500/600 Amps range.

• Advanced Switching inverter technology, low spatter.
• Continuous adjustment of welding voltage and current.
• Slow start facilitates easy arc striking.
• Reduced melting ball at the end of welding.
• High operating frequency hence small size and weight.
• High Power Factor & Efficiency.
• Preset Digital Display of Welding voltage and current

INTIG PULSE series machines are microprocessor controlled fully Digital IGBT Inverter based arc welding power source with soft switching technology. They are widely used for DC MMA, DC TIG & DC PLUSE TIG welding in mild steel, stainless steel, copper & titanium.

Feature :

• INTIG 402 602 Pulse Gas Tungsten Arc Welding Machine
• Advanced Soft Switching inverter technology, hence more reliability.
• Micro controller based technology for precise setting of welding parameters
• Under voltage, Over voltage, Phase absence and over heat protection.
• Digital preset of all welding parameters.
• High Efficiency, Better power factor.
• Light Weigh but high duty cycle.
• Built In High Frequency.
• 2/4 Step function.
• Built in gas control solenoid valve & water flow switch for torch safety.

INARC 401 IH is IGBT arc welding power source.This employs IGBT module in full bridge topology.These machines are widely used for manual metal arc welding with acid, basic electrodes.

• IGBT Module with full bridge topology
• Easy arc striking & stable arc
• Digital display of current & voltage with a selector switch
• Digital Display of Voltage
• High power factor
• High switching frequency, hence low volume &weight
• Adjustable arc force
• Can be used with extended welding cable.
• Standard Remote facility is available.