X

Poonam Paints Corporation

Kashewadi, Pune, Maharashtra

| GST  27AABFP4636J1Z3

| Verified Supplier

View Mobile Number 80% Response Rate
Hi
I agree to the terms and privacy policy
Verifying...
1

Have a requirement?
Get Best Price

Epoxy Finishes

Leading Distributor of Epoxy Finishes such as Epilux 4 Chemical Resistant Enamel Finish, Epilux 84 High Gloss CR Enamel Finish, Epilux 150 High Build Enamel Finish, Epilux 89 High Build Finish and Epilux 78 HBTL Finish from Pune.

Epilux 155 High Build Enamel Finish
Interested in this product?
Get Best Quote

Epilux 155 High Build Enamel Finish

Rs 245 / Litre(s)Get Latest Price

Our entity is offering Epilux 155 High Build Enamel Finish. Our products are widely employed in the market owing to their longer shelf life and purity.

Uses:


  • Recommended for application on structural steel, pipelines, storage tanks, etc., subjected to aggressive environment. Suitable for application on concrete walls and columns. Can be used in fertilizer plants, chemical units, tank farms, offshore installations and various other industries including aqua culture.

Scope:

  • A two pack epoxy high build coating with excellent resistance to severe coastal and industrial environments. Unaffected by a broad range of corrosive chemicals and solvent exposure, it is recommended for protection from fumes, splash and spillage.


Product Data:


  • Type : Two Pack, cured with Amine Ad duct
  • Composition : Catalyzed epoxy resin. suitably pigmented
  • Mixing Ratio : Base : Catalyst - 3 : 1 by volume
  • Pot Life : 4- 6 hours
  • Application : Brush, Conventional or Airless Spray
  • Recommended DFT : 50-60 microns per coat
  • Corresponding WFT : 106-128 microns per coat
  • Theoretical Spreading Rate : 7.8-9.4 Sq. Mtr./Ltr.
  • Drying Time
  • Color : Assorted shades
  • Thinner/Cleaner : Thinner 844
  • Finish : Egg-shell
  • Storage Life : Up to twelve months as long as the sealed containers are kept under cover in a dry place under normal temperature conditions.

 

Surface Preparation:


    • Steel : Remove grease, oil and other contaminants preferably by using Bison Degreasing Solvent. Blast clean to a minimum of 21/2 Swedish Standard SIS 05 5900. For severe corrosive conditions, blast to with a surface profile not exceeding 35-40 microns. If blasting is not practical, make full use of mechanical tools along with manual chipping and wire brushing to remove loose rust and scale to St. 2 Swedish Standard SIS 05 5900. Excessive burnishing of steel is to be avoided. Thoroughly dust down all surfaces. Best results can be achieved if the manual cleaned surface is primed with Protoplasmic - Self Priming Surface Tolerant Coating. The surface should be clean and dry before application of appropriate coat.
    • Concrete NEW CONCRETE Ensure that the concrete is cured for a minimum of three months. Surface is to be made rough and free from emittance and other contaminants by sand sweeping. OLD CONCRETE : Remove all salt deposits from the surface by water jet washing. Light sand blast the surface to remove all loosely bound coatings and roughening up of firmly adhering coatings to ensure anchorage with recommended system. Ensure all dust/other particles are fully removed by suction or air blast and the surface is fully clean and dry before application of paint. In non-critical areas where blasting is not possible water jet washing and hard wire brushing are minimum requisites.


    Application:

     

    • Stir base thoroughly and then mix three parts base and one part catalyst by volume to uniform consistency. Allow the mixture to mature for 30 minutes and stir again before application and during use.
    • Brush : Add up to 5% Thinner 844 if required during application. Conventional Spray : Add up to 15% Thinner 844 depending on conditions. Use any standard pressure pot equipment at an automising pressure of 3.7-4.9 Kg/cm2.
    • Airlock Spray : Apply preferably without thinning. However, up to 6% Thinner 844 may absolutely occontial, depending on conditions.

     

      View Complete Details

      Yes, I am interested!

      Epilux 4 Chemical Resistant Enamel Finish
      Interested in this product?
      Get Best Quote
      Our firm is providing Epilux 4 Chemical Resistant Enamel Finish. Professionals process this product in varied forms that meet on client’s demand.

      Uses:


      • Recommended for application on suitably primed steel structures exposed to chemical and industrial environment in fertilizer, refineries, petrochemicals, paper and pulp plants, food and pharmaceutical units, etc.

      Scope:

      • A two pack high performance epoxy top coat having good chemical resistance coupled with decorative appeal. The product possesses good flexibility, adhesion and oil resistance.

      Product Data:

      • Type : Two Pack, cured with Poly amide
      • Composition : Catalysed epoxy resin suitably pigmented
      • Mixing Ratio : Base : Catalyst - 3 : 1 by volume
      • Pot Life : 4-6 hours
      • Application : Brush, Conventional or Airless Spray.
      • Recommended DFT : 25-35 microns per coat
      • Corresponding WFT : 61-85 microns per coat
      • Theoretical Spreading Rate : 11.7-16.4 Sq. Mtr./Ltr.
      • Drying Time : TOUCH : 2-3 hours
      • HANDLE : 6-8 hours
      • HARD : Overnight
      • Curing Time : 6-7 days
      • Overcoating Interval : MIN : Overnight MAX : 5 days
      • Flash Point : Above 22° C
      • Colour : As per Protection colour card
      • Finish : Glossy
      • Packing : 20 Ltrs.
      • Thinner/Cleaner : Thinner 844
      • Storage Life : Upto twelve months as long as the sealed containers are kept under cover in a dry place under normal temperature conditions.

      Surface Preparation:

      • Steel : Remove grease, oil and other contaminants preferably by using Bison Degreasing Solvent. Blast clean to a minimum of 21/2 Swedish Standard SIS 05 5900. For severe corrosive conditions, blast to 3 with a surface profile not exceeding 35-40 microns.
      • If blasting is not practical, make full use of mechanical tools along with manual chipping and wire brushing to remove loose rust and scale to St. 2 Swedish Standard SIS 05 5900. Excessive burnishing of steel is to be avoided. Thoroughly dust down all surfaces. Best results can be achieved if the manually cleaned surface is primed with Protectionist Self Priming Surface Tolerant Coating.
      • The surface should be clean and dry before application of appropriate printer coat.

      Application:

      • Stir the base thoroughly and then mix three parts of base and one part of catalyst by volume to uniform consistency. Allow the mixture to mature for 30 minutes and stir again before and during application.
      • Brush : Apply without thinning. However, if required during application add maximum up to 5% Thinner 844.
      • Conventional Spray : Add maximum up to 10% Thinner depending on conditions. Use any standard equipment at an automising pressure of 3.5-4.2 Kg/cm2.
      • Airless Spray : Apply preferably without thinning. However, up to 5% Thinner 844 may be added if absolutely essential depending on conditions. Use any standard equipment having pump ratio 30:1. Tip size 0.33-0.38 mm. Tip pressure 110-140 Kg/cm2.

       

      View Complete Details

      Yes, I am interested!

      Epilux 84 High Gloss CR Enamel Finish
      Interested in this product?
      Get Best Quote
      We present an extensive series of Epilux 84 High Gloss CR Enamel. Our products are enormously used in the market owing to their longer shelf life. 

      Uses:


      • Recommended for application in refineries, petrochemicals, heavy chemicals, fertilizers and pharmaceutical industries. Also suitable for concrete which is subjected to product splashes and spills.

      Scope:

      • A high performance epoxy coating unaffected by a broad spectrum of corrosive chemical and solvent exposure. It is specifically meant for protection against fumes, dust, splash and spillage.


      Product Data:

      • Type : Two Pack, cured with Amine Adduct
      • Composition : Catalysed epoxy resin, suitably pigmented
      • Mixing Ratio : Base • Catalyst - 3 : 1 by volume
      • Pot Life : 4-6 hours
      • Application : Brush, Conventional or Airless Spray
      • Recommended DFT : 30-35 microns per coat
      • Corresponding WFT : 70-81 microns per coat
      • Theoretical Spreading Rate :12.3-14.3 Sq. Mtr./Ltr.
      • Drying Time :
      • Curing Time : 6-7 days
      • Overcoating interval : MIN : Overnight MAX : 5 days
      • Flesh Point : Above 22° C
      • Colour : Assorted shades
      • Packing : 20 Ltrs.
      • Thinner/Cleaner : Thinner 844
      • Finish : High Gloss
      • Storage Life : Upto twelve months as long as the sealed containers are kept under cover in a dry place under normal temperature conditions.


      Surface preparation:

      • Steel : Remove grease, oil and other contaminants preferably by using bison degreasing solvent. Blast clean to a minimum of 21/2 Swedish standard sis 05 5900 with a surface profile not exceeding 35-40 microns. If blasting is not practical, make full use of mechanical tools along with manual chipping and wire brushing to remove loose rust and scale to st. 2 Swedish standard sis 05 5900. Excessive burnishing of steel is to be avoided. Thoroughly dust down all surfaces. Best results can be achieved if the manual cleaned surface is primed with protectionist - self priming surface tolerant coating. The surface should be clean and dry before application of appropriate coat.
      • Concrete : new concrete : ensure that the concrete is cured for a minimum of 3 months. Surface is to be made rough and free from emittance and other contaminants by sand sweeping.
      • Old concrete : remove all salt deposits from the surface by water jet washing. Light sand blast the surface to remove all loosely bound coatings and roughening of firmly adhering coatings to ensure anchorage with recommended system. Ensure all dust/other particles are fully removed by suction or air blast and the surface is fully clean and dry before application of paint. In non-critical areas where blasting is not possible, water jet washing and hard wire brushing are minimum requisites.

      Application:

      • Stir the base thoroughly and then mix three parts base and one part catalyst by volume to uniform consistency. Allow the mixture to mature for 30 minutes and stir again before application and during use.
      • Brush : apply without thinning. However, if required during application add maximum up to 5% thinner 844.
      • Conventional spray : add unto 10% thinner 844 depending on conditions. Use any standard equipment at an atomising pressure of 3.5-4.2 kg/cm2.
      • Airless spray ; apply preferably without hurrying. However, ups, 5% thinner 044 it lay be added if ultimately essential depending on conditions. Use any standard equipment having pump ratio.

      View Complete Details

      Yes, I am interested!

      Epilux 89 High Build Finish
      Interested in this product?
      Get Best Quote
      We are betrothed in presenting Epilux 89 High Build Finish. Apart from this, these products are tested by quality checkers in order to supply pure range to the customers.

      Uses:


      • Recommended for use on offshore platform structural, help deck, and accommodation areas as well as under decks and above water areas of jackets. The product is also suitable for application on MS & concrete areas of fertilizer plants, chemical units, refineries, petrochemicals, metallurgical units, etc.

      Scope:

      • A two pack epoxy high build coating with superb performance in severe marine and industrial environments. The product has excellent resistance to chemicals and solvent fumes, splash and spillage.

      Product Data:

      • Type : Two Pack epoxy, cured with Poly amide resin
      • Composition : Catalysed epoxy resin, suitably pigmented
      • Mixing Ratio : Base : Catalyst - 3 : 1 by volume
      • Pot Life : 4-6 hours
      • Application : Brush, Conventional or Airless Spray
      • Recommended DFT : 100-125 microns per coat
      • Corresponding WFT :172-216 microns per coat
      • Theoretical Spreading Rate : 4.6-5.8 Sq. Mir./Ltr.
      • Owing Time : TOUCH : 3-4 hours HANDLE : 8-10 hours HARD : Overnight
      • Curing Time : 6-7 days
      • Over cooling Interval : MIN : Overnight MAX : 5 days
      • Flash Point : Above 22° C
      • Colour : Assorted shades
      • Packing : 20 Ltrs.
      • Thinner/Cleaner : Thinner 844
      • Finish : Egg-shell to semi glossy
      • Storage Life : Upto twelve months as long as the sealed containers are kept under cover in a dry place under normal temperature conditions.

      Surface Preparation:

      • Steel : remove grease, oil and other contaminants preferably by using bison degreasing solvent. Blast clean to a minimum of 21/2 Swedish standard sis 05 5900. For severe corrosive conditions, blast to 3 with a surface profile not exceeding 65 microns. If blasting is not practical, make full use of mechanical tools along with manual chipping and wire brushing to remove loose rust and scale to Swedish standard sis 05 5900. Excessive burnishing of steel is to be avoided. Thoroughly dust down all surfaces. Best results can be achieved if the manual cleaned surface is primed with protectionist - self priming surface tolerant coating. The surface should be clean and dry before application of appropriate primer coat.
      • Concrete a rural that the non-tenured for a minimum of three months. The ruffian ix to ha made rough and free from emittance and other contaminants by sand sweeping. Old concrete : remove all salt deposits from the surface by water jet washing. Light sand blast the surface to remove all loosely bound coatings 8 roughening of firmly adhering coatings to ensure anchorage with recommended system. Ensure all dust/other particles are fully removed by suction or air blast and the surface is fully cleaned and dry before application of paint. In non-critical areas where blasting is not possible, water jet washing and hard wire brushing are minimum requisites.

      View Complete Details

      Yes, I am interested!

      Epilux 78 HBTL Finish
      Interested in this product?
      Get Best Quote

      Epilux 78 HBTL Finish

      Get Latest Price

      Due to rich industry skill, we offer a broad range of Epilux 78 HBTL Finish . We are presenting these products to clientele at nominal costs.

       


      Uses:


      • Recommended for use as a tank lining ( both mild steel and concrete) in fertilizer, refineries, petrochemicals, heavy chemicals and other plants. The product passes MIBK resistance test.

      Scope:

      • A high build high performance tank liner specially designed for sustained immersion service. A self priming coating, this product possesses excellent solvent, chemical and saline water resistance. The product is ideal for storage of Petroleum Hydrocarbon cargoes including ATF, as well as potable water, - approval certificate from CFTRI, Mysore available.


      Product Data:

      • Type . Two Pack, cured with Amine Adduct
      • Composition : Catalysed epoxy resin suitably pigmented
      • Mixing Ratio : Base : Catalyst -4 : 1 by volume
      • Pot Life : 6-8 hours
      • Application : Conventional or Airless Spray. Brush for small areas only.
      • Recommended DFT :100-150 microns per coat
      • Corresponding WET : 182-273 microns per coat
      • Theoretical Spreading Rate : 3.7-5.5 Sq. MtriLtr.
      • Drying Time : TOUCH :2-3 hours HANDLE :6-8 hours HARD : Overnight
      • Curing Time : 7days minimum
      • Overcoating Interval : MIN : Overnight MAX : 5 days
      • Flash Point : Below 22° C
      • Colour : White, Light Grey & Dark Grey
      • Packing : 20 Ltrs.
      • Thinner/Cleaner : Thinner 844
      • Finish : Matt to Egg-shell
      • Storage Life : Up to twelve months as long as the sealed containers are kept under cover in a dry place under normal temperature conditions.

      View Complete Details

      Yes, I am interested!
      Tell us what you
      need
      Receive seller
      details
      Seal the deal
      Pay with IndiaMART
      Save time! Get Best Deal
      I agree to the terms and privacy policy