X

Poonam Paints Corporation

Kashewadi, Pune, Maharashtra

| GST  27AABFP4636J1Z3

| Verified Supplier

View Mobile Number 80% Response Rate
Hi
I agree to the terms and privacy policy
Verifying...
1

Have a requirement?
Get Best Price

Heat Resistance Paint

Leading Distributor from Pune, our product range includes Heat Resistance Paint such as Heat Resistant Paint, Heat Resistant Aluminum Paint, Berger Ferrotol No 1 Paint, Apexior Heat Resistance Paint and Ferrotol Stack Black Paint.

Heat Resistant Paint
Interested in this product?
Get Best Quote

Heat Resistant Paint

Rs 185 / Litre(s)Get Latest Price

Being a popular organization, we are providing Heat Resistance Paint. Our series is widely employed by our patrons due to longer shelf life.

Features:

 

  • Balanced composition

  • Precise pH value

  • Longer shelf life

  • High effectiveness

  • Available in standard packaging

 

 

Price Range:


  • 185 rs to 700 rs per Litre

View Complete Details

Yes, I am interested!

Heat Resistant Aluminum Paint
Interested in this product?
Get Best Quote

Heat Resistant Aluminum Paint

Rs 185 / Litre(s)Get Latest Price

With the years of practice, we are engaged in providing a comprehensive series of Heat Resistant Aluminum Paint that meets on client’s demand.

Uses:


  • Recommended as an excellent exterior durable finish for application on chimneys, stacks, ovens in chemical, fertilizer, refinery and petrochemical industries.

Scope

  • A heat resistant coating which can be used in areas where protection at elevated temperatures upto 250° C is required. It is recommended as a finishing coat over Zinc Anode 304 or Epilux 4 Zinc Rich Primer in higher temperature service zones.

Product Data:

  • Type : Two Pack
  • Composition : Synthetic modified rubber medium with aluminium pigmentation
  • Application : Brush or Conventional Spray
  • Recommended DFT : 15-20 microns per coat
  • Theoretical Spreading Rate : 12.5-16.7 Sq. MtrJLtr.
  • Drying Time : SURFACE • Less than 3 hours HARD : Overnight
  • Overcoating Interval : MIN
  • : Overnight
  • Flash Point : Above 30° C
  • Colour : Aluminium
  • Packing : 20 Ltrs.
  • Thinner/Cleaner : Thinner 800
  • Finish : Bright Metallic
  • Storage Life : Upto twelve months as long as the sealed containers are kept under cover in a dry place under normal temperature conditions.


Surface Preparation:

  • Make full use of mechanical tools along with manual chipping and wire brushing to remove loose rust and scale to St. 2 Swedish Standard SIS 05 5900. Excessive burnishing of steel is to be avoided. Thoroughly dust down all surfaces.

Applications:

  • Mix the paste into the medium and stir thoroughly before and during use. Brush : Apply, preferably without thinning, to the recommended thickness. Conventional Spray : Add upto 10% Thinner 800. Use any suitable standard equipment at an atomising pressure of 2.8-3.5 Kg/cm2.

 

Price Range:


  • 185 rs to 700 rs per Litre

View Complete Details

Yes, I am interested!

Berger Ferrotol No 1 Paint
Interested in this product?
Get Best Quote

Berger Ferrotol No 1 Paint

Rs 185 / Litre(s)Get Latest Price

Minimum Order Quantity: 5 Litre(s)

We are occupied in providing a varied series of Berger Ferrotol No 1 Paint, which is processed by accomplished experts who employ the quality-tested input and advanced techniques

Uses:


  • Recommended for use inside boiler drums, evaporators, tubes, water walls, economisers, steam accumulators, clarifier, steam turbine casings and other similar equipment operating with water or steam at elevated temperatures.

Scope:

  • An anticorrosive composition for 'hotwet' metal surfaces. Renders excellent performance in continuous contact with hot water and steam above 100° C. The coating largely simplifies cleaning and de scaling operations.


Product data:

  • Type : Single Pack
  • Composition : Graphite in bituminous medium
  • Application : Brush
  • Recommended DFT : 35 microns per coat
  • Corresponding WFT : 78 microns per coat
  • Theoretical Spreading Rate :12.9 Sq. Mtr./Ltr.
  • Drying Time : TOUCH : 6-8 hours HANDLE : Overnight
  • Curing : It is essential that the coating is cured thoroughly to render optimum performance. After 24 hours air drying, fill with water and raise temperature to 100° C for a minimum of eight hours. This bakes Ferro to into the substrate producing an inert, insoluble and impermeable film.
  • Overcoating Interval : MIN : Overnight
  • Flash Point : Above 30° C
  • Colour : Black
  • Packing : 20 Ltrs. & 4 Ltrs.
  • Thinner/Cleaner : Thinner 800
  • Finish : Matt
  • Storage Life : Upto twelve months as long as the sealed containers are kept under cover in a dry place under normal temperature conditions.

Surface Preparation:

  • Make full use of mechanical tools along with manual chipping and wire brushing to remove loose rust and scale to St. 2 Swedish Standard SIS 05 5900. Excessive burnishing of steel is to be avoided. Thoroughly dust down all surfaces. The surface should be clean and dry before application of Ferrotol No. 1 Boiler Compound.

Application:

  • Mix the contents thoroughly before and during use. Brush : Apply, without thinning, to the recommended dry film thickness. No primer should be applied. Apply first a thin coat directly on to the metal surface Work well into the surface and ensure all comers, edges, welds, nuts/bolts are covered.

 

Price Range:


  • 185 rs to 700 rs per Litre

View Complete Details

Yes, I am interested!

Apexior Heat Resistance Paint
Interested in this product?
Get Best Quote

Apexior Heat Resistance Paint

Rs 185 / Litre(s)Get Latest Price

We hold proficiency in providing Apexior Heat Resistance Paint. These are processed as per industry standards and parameters. Furthermore, we offer these to our clientele at nominal prices.



Uses:


  • Apart from boiler externals, the coaling can be used in condensers, air coolers, cold water tanks, centrifugal pumps, piping, stoker wind boxes, ducting, etc.
Scope:

  • A preservative coating for metal surfaces designed primarily as an external coating for boilers. The coating performs in contact with salt or fresh water at elevated temperature.

Product Data:

  • Type : Single Pack
  • Composition : Inert bitumen
  • Application : Brush or Airless Spray
  • Recommended DFT : 30-35 microns per coat
  • Corresponding WFT : 79-92 microns per coat
  • Theoretical Spreading Rate : 10.9-12.7 Sq. Mtr./Ltr.
  • Drying Time : TOUCH : 3--4 hours HANDLE : 8-10 hours HARD : Overnight
  • Overcoating Interval : MIN : 24 hours
  • Flash Point : Above 30°
  • Colour : Black
  • Packing : 20 Ltrs. and 4 Ltrs.
  • Thinner/Cleaner : Thinner 800
  • Finish.Glossy
  • Storage Life : Up to twelve months as long as the sealed containers are kept under cover in a dry place under normal temperature conditions.

 

Price Range:


  • 185 rs to 700 rs per Litre

 

Available in:

 

  • 5 Litre

View Complete Details

Yes, I am interested!

Ferrotol Stack Black Paint
Interested in this product?
Get Best Quote

Ferrotol Stack Black Paint

Rs 185 / Piece(s)Get Latest Price

Uses:

  • Recommended for use on the external surfaces of chimneys, stacks, furnaces, etc.

Scope:

  • A bituminous coating for application on metal surfaces exposed to high temperatures. It protects the surface from atmospheric corrosion, chemical fumes and industrial gases.

Product data:

  • Type : Single Pack
  • Composition : Bituminous medium, suitably pigmented
  • Application : Brush
  • Recommended DFT : 30-40 microns per coat
  • Corresponding WFT : 68-91 microns per coat
  • Theoretical Spreading Rate :11.0-14.7 Sq. Mtr.
  • Drying Time : TOUCH : 4 hours HANDLE : 6-8 hours HARD : Overnight
  • Overcoating Interval : MIN : 24 hours
  • Flash Point : Above 30° C
  • Colour : Black
  • Packing : 20 Ltrs. & 4 Ltrs.
  • Thinner/Cleaner : Thinner 800
  • Finish : Semi-glossy
  • Storage Lite : Upto twelve months as long as the sealed containers are kept under cover in a dry place under normal temperature conditions.


Surface Preparation:

  • Make full use of mechanical toots along with manual chipping and wire brushing to remove loose rust and scale to St. 2 Swedish Standard SIS 05 5900. Excessive burnishing of steel is to be avoided. Thoroughly dust down all surfaces. The surface should be clean and dry before application of Ferro to Stack Black.

Application:

  • Stir the contents thoroughly before and during use.
  • Brush : Apply, without thinning, directly on the metal surface at the recommended thickness.

 

Price Range:


  • 185 rs to 700 rs per Litre

View Complete Details

Yes, I am interested!
Tell us what you
need
Receive seller
details
Seal the deal
Pay with IndiaMART
Save time! Get Best Deal
I agree to the terms and privacy policy