Power Concept Scientific

Display : 3 ½ Digit 13mm High, RED LED.Cell Factor : 1.0 & 0.1 Selectable.Conductivity Range :A) For Cell Factor 1.0• 199.9 μs/cm• 1999 μs/cm• 19.99 mS/cm• 199.9 mS/cmB) For Cell Factor 0.1• 19.99 μs/cm• 199.9 μs/cm• 1999 μs/cm• 19.99 mS/cmTDS Range : 2000 ppmTemperature Compensation : Automatic Using External PT-100 Sensor.Size : 96x96 mmwith DO probe of perfect accuracyThe complete setup of controller & probe should be on line such athat sensor probe ismounted on 1” pipe line with control of gate valve. Liquid that circulates in pipe line will becontrolled through 0.5 hp motor pump& storage tank.All set up should be mounted on a sturdy frame.

Stand alone study setup. Tabletop model. Close loop temp.Control system. Provision for study of individual controlelement. Necessary test points for observing individual inputsand outputs. Computer interfaceTEMP SENSOR /TRANSMITTER: Range 0 – 100 / 10000C, RTD PT100 / K T/C type, head mount, singlecompression cable gland. 2 wire, 4-20mA outputs. 24VDC@30mA supply. Zero& span setting.CONTROLLER: Intelligent PID controller. Auto tuning facility. 4 digits LED display for PV& SV. 4 key membrane keypad for data entry. Universal input ( T/C / RTD/ mV/ mA ).Programmable alarm Process control output either Relay/ 4-20mA / 0-10V DC. 96x96x150DIN enclosure. Provision to change P, I, D, Set Point, Offset, Dead Band, Span, Zero,Heat/Cool mode of operation, Engg., Unit, Operating Freq, Security Code for staff consoleoperation etc and many more.CONTROL ELEMENT: Thyristerised heater control. 4-20 mA input. 400Vac, 1Ø Controloutput. PROCESS: Muffle furnace, Air volume 1” x 6”, Forced cooling by fan, MS fabenclosure , Glass wool insulationCONTROL ACCESSORIES: suitable test points for observing individual I/P& O/P.Provision to study individual element in manual mode. Ergonomic system designENCLOSURE: Black painted MS frame & fabricated S. Gray powder painted facia & control panel.UPPLY: 230Vac, 1Ø, 50Hz, + 10% mains. Integral self illuminated switch, fuse & socket

As a customer-focused organization, we are providing a wide array Pneumatic And Hydraulic Actuators. In addition to this, we are providing these products at very leading prices.

Product Details:
475 HART/Field CommunicatorProcessor and MemoryMicroprocessor : 80 MHz Hitachi® SH3
Memory Internal Flash : 32 MB
System Card : IGB
RAM : 32 MB
Connection Battery Charger : Inputvoltage 100-240 VAC, 50-60 Hz Cables included with U.S., Europe, and U.K.plugs
HART and Field bus : Three 4mm bananaplugs (one common to HARTand FOUNDATION fieldbus)IrDA Port IrDA (Infrared Data Access) portsupporting up to 115 Kbps,±15 degreesrecommended maximum angle from centerline, Approximately 18 in. (45.7 cm)recommended maximum distanceGeneral
Weight : Approximately 1.65lb. (0.75kg) with battery Display :1/4 VGA(240 by 320 pixels) color, 3.5 in. (8.9 cm),transflective display with touch screen; antiglarecoated Keypad: 25 keys including 4action keys, 12 alphanumeric keys, tab key,function key, backlight key, power key, and 4cursor-control (arrow) keys;membrane design with tactile feedback

Product Details:
1. Sump tank- Metal tank size 2 foot* 1 foot* 1.5 foot
2. Level Tank- 1 no., Material: acrylic/ P.P. 5 mm thick
3. Temperature Cabinet/ Process Tank- 1 no., Process tank with thick insulation wall &Electric Heater Thermostat, Heater: 3 KW.
4. Centrifugal Pump- 2 nos., ½ / 1 H.P., 1φ 230 V AC supply, Surface mounting. Capacity:15 Kg/cm2, with ½” BSP connection for Pressure Gauge, Pressure Transmitter, Inlet & Drain facility
5. Piping- ½“/ 1’’, Class B GI with ½“/ 1’’ ball valves: 17 no.
6. Flow meter-2 no. Size: ½“/ 1’’, Turbine type/ wfm type, Output: 4-20 mA, Type: 3-wiretype.
7. Level Transmitter-1no., Input: 0-400 /0-500 mmwc, Output: 4-20 mA, supply: 24 VDC, 100 mA, Type: 2-wire capacitance type
8. Pressure Transmitter -1 no., Input: 0-2.5 Kg/cm2/ 0-4 Kg/cm2, Output: 4-20 mA, supply:24 V DC, 50 mA
9. Temperature Transmitter-1 No. Input: RTD, Output: 4-20 mA, Type: , Range: 0-
10.Pneumatic Control Valve- 2 no.. Type: Two way Globe pneumatic type control valve
11. Rotameter: 2 No.s, Range: 0-1000/0-2000 LPH, Glass tube type/acrylic body,
12. E/P Converter - Input: 4-20 mA, Output: 3-15 psi,
13. A.F.R. / F.R.L. Unit-0-10 Kg/cm 2 with pressure gauge,
14. Isolator-2 No.s, Signal Isolators, Input: 4-20 mA, Output: 4-20 mA, Supply: 230 V AC.
15. Power Supply-24 V DC, 5 A,
16. Electronic PID Controller ( 3 Element Controller):2 No., Single input PID & Dual InputPID, with Serial Interface USB / Ethernet / RS 485 / RS 232, , Input: 4-20 mA, Output: 4-20mA, Display: Dual for PV & SP,Bar graph display for Output & deviation, Hi-Low alarmannunciation.
17. Electrical Control Panel: - MS Powder coated panel with switches, indicator.
18. SCADA Application Software: SCADA S/W, PID control settings (P, PI, PD and PIDmode), Auto/Manual Tuning of PID, Data Storage, Off Line analysis, Online DataAcquisition Printing Of data in Graphical and tabular form. Interactive Graphical.
19. Air Compressor: Tank capacity: 25 Litres, Discharge: 2 CFM, Motor: 2 H.P. 230 V ACOperated working pressure: 5-6 kg/cm²

As a customer-focused organization, we are providing a wide array Intergrated direct Level Indicator Trainer . In addition to this, we are providing these products at very leading prices.

Circular chart recorder:-case – aluminummounting - flushconnection -½” and ¾ bspchart - 12” circular typecapillary - 3 mtrs ss-304/copperranges in 120 degree- 38 to 50 degree,100 degreetype- single pen type circular recorderstrip type recorder:-strip chart recorderinput1:- k type thermocoupleinput 2 :- ktype thermocouplerange:- 0-120 degree. Speed:- 60 mm / hrtype- two pen type230 vac mains operated

LVDT Trainer -
Built in AC excitation source 2.5 kHz typical
Displacement range 0-10 mm
TECHNICAL SPECIFICATIONS
To study of LVDT as displacement transducer
Built in AC excitation source 2.5 kHz typical
Linear variable differential transformer in non metallic structure Micrometer attachment with mechanical displacement system Displacement range 0-10 mm
Balanced demodulator IC based
Onboard potentiometers for Span & Zero Adjustment
5 digit DPM as displacement indicator
Interconnection 2/4mm banana sockets
DC Supply Built in IC regulated power supplies
220V ±10%, 50Hz mains operated
Enclosed in an attractive ABS plastic cabinet with coverStandard Accessories User’s Manual with patch cords

Product Details:
Should have facility to work with Analog as wellas Digital PID. Should have facility to monitorbehavior of the PID output & process variable onPC screen. User settable PID controller parametersfor P, PI, PD & PID operations. Should havefacility of graph printing for laboratory journalentries. Electronic desk should carry usefulexperimental resources like Power supplies,DPMs, Computer Interface, Analog PID controllerwith central slot to hold various replaceableexperiment panels. Connection through sturdy4mm Banana sockets & Patch cords. Set of Students workbook & Instructor’s Guide should be provided. P4/XP with parallel port needed.
Basic Resources on Electronic desk:
> DC supply +/- 12V,500mA
> 17Vdc 500mA unregulated for driving pulse transformer Display:
A) DPM – 2nos
1) For temp upto 100ºC & intensity in Lux (2000), b) For temp upto 500ºC.
B) Analog Meter – 2nos.
1) Center zero for display of process error (+9V), b) For MV/SP (0- 2.5V)Operating voltage: selectable 220-240Vac +10% 50Hz

Product Details:
a) Pressure Transmitter with hart facility, Rang 0-2.5Kg / cm², output4-20mA, supply 24VDC50mA.b) Flow Transmitter with hart facility, Rang 1000LPH, connection½”,output 4-20mA., supply 24VDC/100mA.c) Level Transmitter with hart facility Rang 0-500mm, output 4-20mA.,supply 24VDC/100mA

As a customer-focused organization, we are providing a wide array Level Transmitter. In addition to this, we are providing these products at very leading prices.

Product Details:
Analog input channels support various types of signal.
The following options can be selected to input throughmeter configuration.
Voltage signal: 0-5/1-5VDC/0-20/0oC100mVDC
Currentsignal: 0-20/4-20mADC
Thermal resistance: Pt100, Cu50
Thermocouple: B, E, J, K, S, T 2
Output 1 analog outputchannel(4−20mA)can drive a maximum load of 750Ω. 1isolated 24VDC feedback output can supply a current asmuch as 50mA.
Accuracy Rea-time display: ±0.2% F.S. Recall accuracy: ±0.2% F.S. Coldjunction tolerance: ±2% Clock accuracy: ±2S/Day Notes: Reject cold junction tolerance ofthermocouples.
Record Interval
Record interval selection: 1/2/5/20/40/60/120/240 second(s).
Record Capacity
4MBit. The user can allocate it to two input channels through instrumentconfiguration (0.5MBit per unit).
Record Time If the power is ON, the total record time T ofevery channel can be calculated by the Record Interval T and Record Capacity n.
See theformula as follows: T=0.74×n×t; Where: T: day; t: S; n: M, the value can be 0.0, 0.5, 1.0, 1.5,2.0, 2.5, 3.0, 3.5 or 4.0. For example: In case n=4.0, t=240S, this channel can record forT=710.4 days.
Alarm Output2 passive Contact Outputs. Contact Capacity: 1A 30VDC. Default: normal open.
Communication RS485 mode: Complying with open MODBUS RTU slave protocol, and thebaud rate can be set: 1200/4800/9600/19200/38400/57600 bps.
Screen Display Resolution: 192×64 Scan frequency: 1Hz
Power Supply Rated AC supply voltage: 0.2A @ 90-260VAC, 45-55Hz.
Size Outline size:160mm(Width)×80mm(Height)×48mm(Depth) Hole size: 152×76mm.
Net weight ≤1.0kg.
Storage condition Temperature: -20-60oC. Avoid direct exposure to violent sunlightHumidity: <85%RH (no coagulation).
Operating condition Temperature: 0-55oC Humidity:10-85%RH (no coagulation).
Notes: Do not operate in an erosive atmosphere. Do not bringliquid or conductive substance into the instrument. Keep airiness near the intake in a goodcondition

Product Details:
P to I and I to P converters, I/P - 4 to 20mA, O/P - 3 to15 PSI

Product Details:
This is an analogue type simplecalibrator with master pressure gauge havingmeasuring range (0-5 bar) & having two pressure linesBoth lines are separated by 3 way manifold , Two sideof manifold are used by regulated pressure lines &reaming third side used by air pressure source.pressure gauges to be calibrated are compared withmaster pressure gauge

As a customer-focused organization, we are providing a wide array Integrated Direct Level Indicator Sight Glass Type Trainer. In addition to this, we are providing these products at very leading prices.