Power Concept Scientific

Micron vacuum gauge, capable of reading up
to 20 microns

We are one of the foremost firms of Compression Tester. Besides, we present this product at nominal rates to our customers.

• Straining at variable speeds to suit a wide range of materials
• Various models - Max. capacity from 50 to 500 tf
• Wide range of standard & special accessories including load stabilizer
• Loading accuracy well within + 1%

One can avail from us a quality approved assortment of Cold Storage Trainer. Owing to their top quality, our products are extremely praised amongst the patrons.

Specification:

• Hermetically sealed compressor: 1/3rd HP cap.
• Air Cooled condenser: 1/3HP, size: 12” x 13” x 2 rows
• Expansion Device: Capillary & Thermostatic Expansion valve
• Hand shut off valves: 1/4” & 3/8”
• Energy meter: 2.5 – 5 amps

We are engaged in offering Water Cooler Trainer, which is extremely praised in the market. Owing to high demand, professionals make these products in varied patterns.

Specifications:

• Cooling tower, fabricated of M.S. sheets, 200 X 200 mm. cross Section, 1.2 m height with Perspex front
• Wire mesh packing is Provided in the tower
• Water Heater - 3 Kw capacity to provide hot water
• Centrifugal blower 1 HP to force air through tower
• Multichannel Digital Temperature Indicator to measure temperature at various points
• Rotameter to measure inlet water flow
• Measuring tank to measure outlet water flow
• Calibrated orifice and water manometer to measure air flow
• Arrangement to measure temperatures of water at five intermediate stations along the height of tower

Specifications :

1. Compressor wobble plate type brand new tested and certified with principal manufacturer along with Serial .Number.

2. Condenser parallel flow type suitable for car

3. Evaporator serpentine type with thermostatic expansion valve, blower motor and grill.

4. Receiver with sight glass and other accessories.

5. All ideal controls and safety controls for car ac.

6. Single phase electric motor 2 HP copper winding to run the compressor

7. Suitable 12volt battery to run condenser fan, evaporator fan and to operate magnetic clutch of compressor.

8. Battery Charger to recharge Battery.

Due to rich industry skill and experience, we have been accomplished to provide our valued customers the best quality range of Tube Bender.

Our firm offers a varied range of Tube Cutter. Professionals develop this product as per worldwide industry standards. We offer this product at nominal costs.

Ice candy plant 2 ton with capacity to make 32 ice candy at a time with Forma tray, stainless steel tank on trolley.:- Ice candy plant, 2 ton (6000 K Cal./Hr.) with stainless steel tank, mould box, thermo Cole/puff insulated, stainless steel body, Agitator with motor,

Reciprocating compressor Hermetic .Temperature control digital type , LP-HP pressure control digital type , refrigerant control , compound and pressure gauge digital, amp. meter and volt meter digital , capacity to make 32 ice candy at a time with Forma tray, temperature range up to -30 degree centigrade, complete system fitted on heavy duty iron frame and controls fitted on steel panel. complete charged with refrigerant. System fitted On heavy duty Trolley. System consists

1. Hermetic reciprocating compressor brand new tested and certified by principal manufacturer along with Serial .Number. and guaranty card, capacity 2Ton

2. Air cooled condenser 2 ton capacity with heavy duty fan, condenser made of copper tube and aluminum fins with housing.

3. Brine cooling coil tank type with agitator motor heavy duty, tank type cooling coil made of stainless steel and copper tube capacity 2 ton

4. Expansion device- an arrangement of automatic expansion valve with hand shut off valve, a thermostatic expansion valve with hand shut off valve and a capillary tube with hand shut off valve provided using at a time 1 expansion device used and other 2 closed with hand shut off valve for the purpose of experiment

5. HP and LP cut out switch each 1

6. Liquid line indicator

7. Receiver with inlet and outlet valve

8. Solenoid valve,9. solid core filter drier

10. Suction accumulator

11. Temperature meter digital type-3No.

12. Amp meter digital type

13. Energy meter digital type

14. Voltmeter digital type

15. MCB 2 poll as a main switch

Evacuating and refrigerant charging station, consist of
a)Rotary two stage vacuum pump and motor (with gas ballast and anti suck back)
b) manifold with gauges and valves and capable of pulling vacuum up to 50 microns of Hg and with provision of connecting to a microns level vacuum gauge
c)Weighing scale digital type cap. 5 kg. Accuracy of ± 1 gm for charging hydrocarbons.

Evacuating and refrigerant charging station, consist of
a) Rotary two stage vacuum pump and motor (with gas ballast and anti suck back)
b) manifold with gauges and valves and capable of pulling vacuum up to 50 microns of Hg and with provision of connecting to a microns level vacuum gauge
c)Graduated charging cylinder with provision for temperature correction and all necessary isolating valves.

Our firm is ranked amongst the reputed names in the market for offering an extensive range of Air Conditioning Trainer. Besides, we present this series to our clients at nominal prices.

Specifications : 

Compressor: Hermetically sealed compressor 1 Ton

Refrigerant Used: FREON R-22

Air cooled : Condenser with suitable condenser cooling fan

Expansion Device :

1. Capillary tube.

2. Thermostatic expansion valve

Evaporator: Air calorimeter type evaporator. The air passed by a fan through duct refrigerant passes through evaporator coils, fixed in the duct. The passing air comes in contact with the coils & gets cooled

Duct: Air duct of size 300 x 300 mm make out of iron plate in which evaporator is fitted.

Baby Boiler: Electrically fired small baby boiler for maintaining humidity of air with electrical heater.

Energy Meter : One each for power measurement of compressor & heater

Pressure Gauge : 2 Nos. for H.P., L.P. measurement

HP/LP cut out: 1 No. to suit compressor.

Anemometer: for air flow measurement.

Digital Temperature Indicator with required thermocouples.

Switches: For compressor, condenser fan.

Other accessories :

Ammeter 0 - 15 A.

Voltmeter 0 -250V.

Heater

Suitable filter/drier

Being quality-centric firm, we are engaged in presenting a high-class range of Flaring Tool. We assure our clientele the prompt delivery of these products at reasonable prices.

We have an eminent name for offering a vast array of Display Board. This product is manufactured using only quality tested materials.

 
Specification
  Sealed Circuit(Electrolux refrigerator)=: The System has no moving parts at all, which makes it Silent and very durable.
  Refrigerant: Mixture of three fluid system Ammonia(NH3) + Water (H2O) + Hydrogen (H2)
  Gases: Non – CEC, Non – HCFC, Non – FCKW, Non – Freon
  Mode of System:    Externally heated by electric resistance Temperature
  Temperature Measurement : By Temperature Transmitter.
  Evaporator: Coil Type evaporator with facility to determine performance efficiency ratio (PER)
  Volume of Cabinet: 41 Ltrs., Voltage Input – 65 Watts, Electrical Consumption/24 Hrs. – 0.8 kWh, Voltage – Single Phase, 220 Volts, AC 50 Hz.
  Temperature Sensor: RTD PT-100 Type
  Control Panel comprises of : Digital Voltmeter: 0-300 V Mains Indicator.       
  The whole set-up is well designed and arranged on a rigid structure .
 

Our presented series of Refrigeration Test Rig is enormously demanded in the market for their long-lasting nature and superior finish.
With the valuable assistance of skilled team of professionals, we are engaged in offering an extensive range of high-quality Heat Pump Test Rig.

Specifications :

Compressor: Hermetically sealed compressor 1 ton

Refrigerant Used: R-134A

Evaporator coil: Suitable for above compressor merged in water tank.

Electric Heater: For Balancing refrigerating effect produced.

Energy Meter : One each for power measurement of compressor & heater

Pressure Gauge : 2 Nos. for H.P., L.P. measurement

HP/LP cutout: 1 No. to suit compressor.

Digital Temperature Indicator with required thermocouples.

Switches : For compressor, condenser fan & heater

Expansion Device :

Capillary tube.

Thermostatic expansion valve

Other Accessories :

Ammeter : 1 No.

Voltmeter : 1 No.
 

Thermostat : 1 No.

Suitable filter/drier

Features:

Robustly built

Minimum maintenance

Energy efficient

Leveraging on our vast knowledge of this realm, we are betrothed in presenting an optimal quality series of Refrigerant Leakage Detector.

Recovery unit with cylinders CFC:-
Recovery unit with cylinders CFC complete with gauges, liquid indicator HP & LP Cut-outs, on-off switch, MCB, valves, empty gas cylinder 2Kg capacity, 2 Nos. flexible gas charging line.
                                 &
Recovery unit with cylinders 134a :-
Recovery unit with cylinders 134 a complete with gauges, liquid indicator, HP & LP Cut outs, on-off switch, MCB, valves, empty gas cylinder 2 Kg capacity, 2 Nos. flexible gas charging line.

We are specialized in offering Package AC 5 Ton to our customers. Our presented product is extremely used in the market owing to their top features.


Specifications :

1. reciprocating compressor brand new open type with drives tested and certified by principal manufacturer along with Serial .Number., capacity and guaranty card

2. motor 7.5 HP copper winding 1440 rpm, class of insulation F, operated on 3 phase supply

3. cooling coil made of copper tube and aluminum fins of 5 ton capacity with blower and housing with V belt, pulley and electric motor copper winding heavy duty

4. expansion device thermostatic expansion valve 5ton capacity

5. condenser shell and tube type, tube made of copper capacity 5 ton

6. cooling tower forced or induced draft type with brass spray nozzle made of fiber glass with 1 HP single phase water circulating pump and accessories

7. humidity control system for change in humidity condition with digital hygrometer

8. liquid line indicator

9. solenoid valve

10. solid core filter drier

11. liquid receiver with inlet and outlet valve 5 ton capacity

12. suction accumulator

13. HP and LP cut outs

14. digital volt meter

15. digital amp meter

16. Energy meter

17. hand shut off valve 5/8" x 5/8" - 2 No.

18. hand shut off valve 1/4" x 1/4" - 2 No.

19. copper pipes and fittings, water pipes and fittings as per requirement Cooling coil outlet provided with duct and damper facility, plant complete with electric control panel, indicating lights and MCBs contractor, relays and inter locking wiring facility. Plant operated on 440V AC supply. Unit complete in all respect duly refrigerant charged.

Ductable split A.C 1.5 ton with R134a or R-22 reciprocating compressor:- Duct able split A.C 1.5 Ton with HFC blend, R410a , reciprocating/rotary compressor. With suitable copper tube suction and liquid line with insulation, Three core supply wire, mounting brackets for indoor &outdoor units. Outdoor unit fitted with service valves. Remote controlled.

As a customer-focused organization, we are providing a wide array R310 Digital Gauge. In addition to this, we are providing these products at very leading prices.

Compound gauge, Digital type scale vacuum 76mm, Pressure 15 Kg/sq. cm

Anemometer (vane type) 0 to 5000 CFM also measurement in meter/s., km/hr., knots. Digital type operated on dry cell with provision of on/off switch. Complete set in case with operation manual

We are renowned organizations of market for presenting the optimum quality range of Fin Comb, which is extremely employed in the industry.

Being a trustworthy name in the industry, we are able to offer a superior quality array of Shell Tube Condenser and Chiller to our patrons.

• Shell and tube type condenser 5 Ton with copper tubing only with mounting plates.

• Finned copper tube 3/4" OD

• No. of copper tube-24 Nos

• With pressure relief wall, air purging facility.

   

Specification-

·  Compressor: Hermitically sealed compressor.

·  Agitator: Compatible capacity.

·  Condenser: Forced convection air cooled.

·  Condenser cooling fan:     Axial flow type, Compatible capacity with permanent lubricated motor.

·  Evaporator: Direct expansion type..

·  Pressure Gauges: 2 Nos.

·  Accumulator: Copper / M.S. shell suction line accumulator provided.

·  Insulation: Polyurethane Foam (PUF)

·  Safety Control: overload and over current protectors for compressor and Time delay circuit.

·  Temperature Sensor: RTD PT-100 Type.

·  Control Panel comprises of:

·  Digital Voltmeter: 0-300 V

·  Digital Ammeter: 0-5 Amp.

·  Temperature Measurement: Digital Temperature Indicator with multi-channel switch.

·  Instruction Manual: An ENGLISH instruction manual will be provided along with the Apparatus

·  All Other accessories like Hand shut off valves, filter drier and Thermostat will be provided.

Specification

Compressor: Hermetically sealed compressor capacity

1 TON

Air cooled : Condenser with suitable condenser cooling fan

Expansion device :

I.                   Thermostatic expansion valve

Evaporator coil: Suitable for above compressor merged in water tank.

Electric Heater: For   Balancing refrigerating effect produced.

Energy Meter : One each for power measurement of compressor & heater

Pressure Gauge : 2 Nos. for H.P., L.P. measurement

HP/LP cutout: 1 No. to suit compressor.

Digital Temperature Indicator with required thermocouples.

Other accessories :

      i     Ammeter                                             : 1 No.

     ii.    Voltmeter                                            : 1 No.

    iii.    Thermostat                                          : 1 No.

    iv.    Suitable filter/drier

We are the leading provider of Portable Brazing Kit. These products are identified amid patrons for their noticeable features such as longer life, durability and nominal cost.

Temperature &Humidity recorder Capacity to record 24 hrs record 

De scaling pump set with stainless steel impeller and housing complete with motor 1/2 hp and accessories. :- De scaling pump set with stainless steel impeller and housing complete with motor 1/2 hp copper winded single phase and Accessories:- SS nipples and hose pipe 5meters and clips.

Features:

• Durable
• High performance
• Robust construction
• Easy installation
• Sturdy design