Preci Tech India

Fuel :

WOOD,
COAL,
LIGNITE,
DIESEL,
LDO,
FO,
BIO-MASS,
HUSK,
BIO GAS,
PET-COOK FIRED,
ELECTRICAL BOILER.

Capacity : 30kg/hr to15000 kg/hr.

Pressure : 10.54 kg/cm2 and 17 kg/cm2

FUEL :
WOOD,
COAL,
LIGNITE,
DIESEL,
LDO,
FO,
BIO-MASS,
HUSK,
BIO GAS,
PET-COOK FIRED,
AGRO  WASTE
ELECTRICAL THERMIC FLUID HEATER .

TEMP : 300OC STANDARD MODEL, 350OC HIGH TEMPERATURE MODELS & 400OC VAPOUR DESIGN.
CAPACITY : 30000 KCAL/HR 9 MILLION KCAL/HR.

WE CAN PROVIDE AND MANUFACTURE ELECTRICALLY HEATED THERMAL FLUID HEATERS ON REQUEST.

Fuel : HSD [diesel], LDO, FO, GAS
CAPACITY 2 KG/HR TO 2TON/HR
Incinerator is available with rotory furnaceace.

Capacity - 300kg/hr to 3000 kg/hr,

package avilable with primary rotory chember + secondary stationary chember + dust collector + heat recovery system + smoke washer + id fan + chimney anlong with fd fans and burners.with auto control system

It is thermal [ HEAT ] exchange unit that helps to reduce heating costs by retaining existing heat. It has large potential of saving fuel cost for the fired equipment. The heating surface of the system is provided with adequate margin for fouling on exhaust gas side. This ensure that heat recovery is not affected by soot accumulation on tubes within reasonable limits. It is designed for pressure drop on exhaust gas side as per maximum permissible back pressure of source equipment.

Our waste gas boilers are designed to burn waste gas and tail gases from processes, including lean gases of low calorific value, to generate steam for captive power or co-generation.

We have fired heaters for wide ranging applications in refineries, petrochemicals and chemicals, customised charge heaters, start up heaters, and reformers.

  J, K, RTD (PT100) with compensating                     cable,    Head type, Extra Length                     Sensor like 1m, 2m, 3m, 4m.

we offer high quality solenoid valves for steam/ air/ water
                   

We offer high quality  Water Testing Kits,                 

Thermic Fluid Pump of sizes-
                    32 X 200 /  40 X 200  / 50 X 200 and all                     above series& piston pump.
                    ITS SPARES like Sleeve, Shaft, Gland                     packing , Gasket Sets,impeller,                     impeller nuts.

       70mm , 80mm, 90mm, 110mm, 120mm,                     130mm, 140mm, 150mm, 160mm, 180 or                     as per sample. Diffuser plate holder,                     gland clamp.

 MS/ BRASS make ,for Pressure up to                     3000 PSI
                    Extra Length Nipple, Hose Pipe ,                     Hydraulic pipe. Extra lenth pipes on                     request.

150LPH, 300LPH, 450LPH, 600LPH,
                    1000LPH 1800LPH…..UP TO 10000 LPH
                    SUNTEK PUMPS – AS47A/C, D57A/C,                     D67A/C, AN67A/C, AJ6 AE /AC, E 6NB                     and Many more on request.
                    Mechanical seals , rubber spider,                     couplings for all pumps.

aspee, shakti, hitech and its spares                     like valve rings, piston rings, valve set                     assembly, bearings.

Monarch , danfoss, dalvon
                    Monarch nozzles –up  to 100 gph
                    Danfoss nozzles- up to 28 gph

 Danfoss, Fida , Cofi, Beru, Nec,Brahma.
                    High Voltage Ignition Cable, Electrode                     caps, Connectors / pins / lugs for                     transformer

2.5”, 4”, 6”, 8”, and above in size as

per requirement  2.5 kg/cm2 to 600

kg/cm2 back connection / bottom

connection and many more as per

customer’s requirement     

1”, 11/2”, 2”, 3” and  above series on                     request. Simplex / Duplex filter with                     filter elements.

WE CAN PROVIDE AND MANUFACTURE ELECTRICALLY HEATED

HOT WATER/ AIR GENERATORS ON REQUEST.

TYPES : DIRECT HOT AIR/ INDIRECT HOT AIR.

FUEL :
WOOD,
COAL,
LIGNITE,
DIESEL,
LDO,
FO,
BIO-MASS,
HUSK,
BIO GAS,
PET-COOK FIRED,
AGRO WASTE
ELECTRICAL HOT WATER / AIR GENERATOR.

CAPACITY : 3000KCAL/HR TO 4 MILLION KCAL/HR.
TEMP : 40?C TO 950?C.FOR HOT AIR GENERATOR
AND 138 DEG. C FOR PRESSURIZED HOT WATER GENERATORS. AND 93 DEG FOR NORMAL HOT WATER GENERATOR

Burner Rod / Burner gun for Diesel ,fo,                     gas, circulation type
                    Solenoid coils for burner rod

Graphoile Rings for KSB, Auro Pump,                     Gland Rope of 8mm, 10mm, 12 MM, 14                     MM  AND ABOVE thickness

FUEL -

LDO / HSD

FO

GAS

CAPACITY - 2.5 KG/HR TO 600 KG/HR

ADVANTAGES -- VERY REGID AND STRUDY

SPARES AVILABELE IN MARKET

 -6mm dia 8mm dia, 10mmdia, 12mm                     dia 14mm dia & H – Type.

Our Solid fuel boilers span the entire range of biomass and waste fuels and offer a competitive and cost effective solution for captive power, and co-generation systems.

Additional Information:

• Item Code: WS-01