250 KVA Servo Voltage Stabilizer
| Input Voltage | 280 - 470 Volts. |
| Output Voltage | 400 Volts. |
| Brand | DESTA |
| Insulation | F Class |
| Correction Speed | 15 to 25 Volts. |
Continuous stable supply of AC Power is the life line of any sophisticated and electrical & electronic system. The performance of these instruments is optimum at the rated voltage. Under voltage generally reduces efficiency, and very low voltage even can force the system to shut down. High voltage shortens the life and even can burn the instrument. Desta Servo voltage stabilizer receive fluctuating AC voltage of wide range and delivers constant Output voltage with in ± 1%of the nominal voltage; it is therefore an excellent remedy for the problems of wide fluctuations. The efficiency is maintained as high as 95%& more. The output voltage stability of our servo stabilizer allows the optimum drawing of the current by the connected load and as such no extra power is consumed at low as well at high voltage. This therefore save electric power to approximately 20% and reduces MDI. Basic components of Servo voltage stabilizer are:Buck boost double wound transformer.Suitable toroidal wound variac.Geared servo motor unit with limit switches to avoid over running at highest and lowest position.Microcontroller Digital display control card.These entire components are interconnected to form Servo Voltage Stabilizer. Salient FeaturesWave Shape distortion-nil.95% and more efficiency being achieved by optimum design and by use of high quality CRGO lamination and 99.9% pure copper.Immune to load PF and supply frequency variation.Power losses 2% maximum.Duty cycle continuous.Life expectancy 15-20 yrs.Operation-Auto/Manual.Control through Micro Processor Controller/IC based solid state plug in type glass epoxy control Card.High quality EHV grade oil as per IS-335.Reference Standard IS-9815, IS-2026.
Technical Specification of Servo Voltage Stabilizer
Make: Desta
Type: Indoor Floor Mounting.
Capacity: 1 KVA to 150 KVA / 3 KVA to 3000 KVA
Input Voltage: As Per Customer Requirement.
Output Voltage: 230/240 /400 / 415 Volts. ± 1% Nominal. Front panel Adjustment with in ± 5% of Nominal Voltage.
Input/Output Connection: Terminals of suitable rating.
Correction Rate: 15-25 volts/ Sec.
Suitability: Unbalance Input Voltage, Balance Output Voltage, & Balance/ Unbalance Load.Compatibility: Use with Mains and DG set.
Environment: Designed for Indoor Tropical Use.
Ambient: -10 to 50 deg. C RH 95%
Insulation Resistance: Dielectric test: 1.5 KV RMS for 1 minute for the unit 2.5KV for the Power components.
Auto/ Manual operation: Provided.
Efficiency: >95%
Wave form Distortion: Nil
Visual Indications: Input, Output, Low/High Voltage, Time Delay, Mains ON, Low/High Voltage Cut-off.
Nature of Cooling: Air Cooled / Oil Cooled
Response Time: 10 m sec.
Control: Through Micro Controlled Digital Circuit.
Reference Standard: IS-9815, IS-2026.
Desta Electricals India
Product Details
Company Details
Product Specification
| Input Voltage | 280 - 470 Volts. |
| Output Voltage | 400 Volts. |
| Brand | DESTA |
| Insulation | F Class |
| Correction Speed | 15 to 25 Volts. |
| Input Window | 260 - 490 Volts. |
| Output Frequency | 50 Hz |
| Minimum Order Quantity | 1 |
Product Description
SERVO VOLTAGE STABILIZER
Continuous stable supply of AC Power is the life line of any sophisticated and electrical & electronic system. The performance of these instruments is optimum at the rated voltage. Under voltage generally reduces efficiency, and very low voltage even can force the system to shut down. High voltage shortens the life and even can burn the instrument. Desta Servo voltage stabilizer receive fluctuating AC voltage of wide range and delivers constant Output voltage with in ± 1%of the nominal voltage; it is therefore an excellent remedy for the problems of wide fluctuations. The efficiency is maintained as high as 95%& more. The output voltage stability of our servo stabilizer allows the optimum drawing of the current by the connected load and as such no extra power is consumed at low as well at high voltage. This therefore save electric power to approximately 20% and reduces MDI.
Basic components of Servo voltage stabilizer are:
Buck boost double wound transformer.
Suitable toroidal wound variac.
Geared servo motor unit with limit switches to avoid over running at highest and lowest position.
Microcontroller Digital display control card.
These entire components are interconnected to form Servo Voltage Stabilizer.
Salient Features
Wave Shape distortion-nil.
95% and more efficiency being achieved by optimum design and by use of high quality CRGO lamination and 99.9% pure copper.
Immune to load PF and supply frequency variation.
Power losses 2% maximum.
Duty cycle continuous.
Life expectancy 15-20 yrs.
Operation-Auto/Manual.
Control through Micro Processor Controller/IC based solid state plug in type glass epoxy control Card.
High quality EHV grade oil as per IS-335.
Reference Standard IS-9815, IS-2026.
Technical Specification of Servo Voltage Stabilizer
Make: Desta
Type: Indoor Floor Mounting.
Capacity: 1 KVA to 150 KVA / 3 KVA to 3000 KVA
Input Voltage: As Per Customer Requirement.
Output Voltage: 230/240 /400 / 415 Volts. ± 1% Nominal. Front panel Adjustment with in ± 5% of Nominal Voltage.
Input/Output Connection: Terminals of suitable rating.
Correction Rate: 15-25 volts/ Sec.
Suitability: Unbalance Input Voltage, Balance Output Voltage, & Balance/ Unbalance Load.
Compatibility: Use with Mains and DG set.
Environment: Designed for Indoor Tropical Use.
Ambient: -10 to 50 deg. C RH 95%
Insulation Resistance: <6 Mega Ohms at 500V DC.
Dielectric test: 1.5 KV RMS for 1 minute for the unit 2.5KV for the Power components.
Auto/ Manual operation: Provided.
Efficiency: >95%
Wave form Distortion: Nil
Visual Indications: Input, Output, Low/High Voltage, Time Delay, Mains ON, Low/High Voltage Cut-off.
Nature of Cooling: Air Cooled / Oil Cooled
Response Time: 10 m sec.
Control: Through Micro Controlled Digital Circuit.
Reference Standard: IS-9815, IS-2026.
Additional Information
| Item Code | D280200 |
| Delivery Time | 10 Days |
| Production Capacity | 15 pcs./ month |
About the Company
We are in the Indian Market since 1986. We design and manufacture world class equipment mention above. We manufacture our products, keeping in mind the needs of the domestic and industrial Uses. We ensure to eradicate the blow of today's harsh power supply and damaging the electrical environment. We adhere to IS Standards for our products under the supervision of qualified engineers and Technical Staff. We have the facility of R & D and Testing Lab at our end to support our product.
Company Video
Seller Contact Details
Plot No - 01,02,03, Mini Industrial Area, Mant, Mathura - 281001, Uttar Pradesh, India
Get Directions