320-PET Injection Moulding Machine
Clamping Force | 3200 KN |
Machine Structure | Horizontal |
Maximum Injection Pressure | 146 MPa |
Oil tank capacity(Litre) | 480 L |
Opening Stroke (Millimeter) | 660 mm |
- Enlarged hydraulic system and pump servo motor
- Enlarged the torque of the plasticization motor
* Enlarged ejector force
* Advance injection screw design for PET
* Chrome plated injection screw and barrel flange.
Advantages:
* Innovative design out-toggle outside elbow clamping structure
* High precision linear transducer position.
* High quality of chromium coating barrel and screw.
* High quality hydraulic motor.
* Servo power saving system.
* Closed loop controlling of hydraulic pressure and flowing
* Parameter pre-set
* Robot interface
* Real-time inspecting of every motion
Price Range:Rs.2000000-20000000/Unit
Product Details
Company Details
Product Specification
Clamping Force | 3200 KN |
Machine Structure | Horizontal |
Maximum Injection Pressure | 146 MPa |
Oil tank capacity(Litre) | 480 L |
Opening Stroke (Millimeter) | 660 mm |
Screw Diameter (Millimeter) | 70 |
Maximum Mould Height | 690 mm |
Minimum Mould Height | 270 mm |
Ejector stroke | 180 mm |
Max daylight | 1350 mm |
Screw L D Ratio | 24 |
Max mould height | 690 mm |
Pump motor | 42 kw |
Heating capacity | 18 kw |
Min mould height | 270 mm |
System pressure | 16 MPa |
No of ejector pin | 13 pc |
Ejector force | 113 KN |
Plasticization capacity | 65.2 g/s |
Machine Dimension | 6.8x1.7x2.6 m |
No of heating zones | 4+1 |
Swept Volume | 1232 cm3 |
Machine weight | 10.1 Ton |
Shot weight | 1355 g |
Screw speed | 165 rpm |
Screw stroke | 320 mm |
Injection rate | 414 cm/s |
Space between tie bar | 710x660 mm |
Product Description
- Enlarged hydraulic system and pump servo motor
- Enlarged the torque of the plasticization motor
- Enlarged ejector force
- Advance injection screw design for PET
- Chrome plated injection screw and barrel flange.
Advantages:
- Innovative design out-toggle outside elbow clamping structure
- High precision linear transducer position.
- High quality of chromium coating barrel and screw.
- High quality hydraulic motor.
- Servo power saving system.
- Closed loop controlling of hydraulic pressure and flowing
- Parameter pre-set
- Robot interface
- Real-time inspecting of every motion
Price Range:Rs.2000000-20000000/Unit
About the Company
Sarada Machinery Company (SOS Group of Companies) has carved a prestigious niche in this realm by years of efforts in this industry. Our company's main head office is settled at Punjagutta, Hyderabad, Telangana, from where we are handling our business. Our company is a Partnership based entity, engrossed as the eminent manufacturer since 1994. The products we are delivering to customers are Injection Moulding Machine, PVC Injection Moulding Machine, PET Injection Moulding Machine, Electric Injection Moulding Machine. We have established a modern QA lab that is handled by efficient crew of quality controllers, who ensure to deliver products with zero defects. They observe the entire manufacturing procedure, right from obtaining the basis material then production till final dispatch of the consignments.
Seller Contact Details
4th Floor 402 Mathanagar Siri Malle Towers Punjagutta, Kukatpally Hyderabad - 500082, Telangana, India
Get Directions