|Water Consumption||300 L/m3|
|Water Consumption||300 L/m3|
|Minimum Order Quantity||1 Unit|
Batching System: Pouring & mixing machine is the main equipments in Workshop section of batching pouring covering by The AAC production line. After being metered, various Kinds of raw material and water will be poured into the Cylinder of this pouring & mixing machine, and then All of them will be mixed together into the expected Slurry which will be proper for subsequent pouring. Upon opening the discharge butterfly valve, the slurry will be poured into the mould for pre-curing.
Tilting Crane: Tilting crane turns the block (with mould and side plate) by 90 degrees in air, then hanging on cutting platform or cutting car, to de-mould and cut. In addition, group moulds after de-moulding and side plates of returning back. After grouping, they are hung to pouring return line to carry cycle pouring.
Grouping Crane: After Cutting, Semi-product crane hand blocks on steam curing car, and group before into autoclave. This device have simple structure, suitable operation good quality & easy to maintain. Grouping crane transfer cake, steam trolley, side plate at proper requires position without damaging cake.
Mould Box: Mould is the key equipment included in the AAC production line. When the slurry is poured into mould, it will be subject to pre-curing with the occurrence of foaming then the “cake” ready for subsequent cutting will be available.
Side Plate: Side plate is the tool that matched with mould box for pouring & pre-curing process. And also carrying cake for finished cutting & go into the autoclave. We can also say that Side plate is used for carrying AAC block to cut stack and steam.
Steam Trolley: The Steam trolley is the tool carrying the mould box side plates as well as the block body out of the autoclave. Steam trolley hold in high temperature & pressure so required high temperature bearing as well as heavy structure.
Cutting Machine: Cutting machine is the key equipment in the AAC Production line, the working Principle is the tiling hanger turns the mould 90 degrees in the air, open the mould and takes block onto the cutting cart together with the side plate. The cutting car was driven by the motor. The block would be driven for horizontal and vertical cutting. The cutting cart will move to semi-finished product hoister, and the hoister loads the cut block to trolley in front of the autoclave for grouping. The cutting cart will back for new round cutting.
Autoclave: AAC Autoclave is a kind of large-scale steam equipment. Autoclave is one of the most devices for the AAC process which can effect the Strength and Comprehensiveness Quality of the products by Steam-Curing and High Pressure.AAC Autoclave is the Pressure Vessel and Key equipment in the production of Aerated Concrete and Autoclaved Brick. It is applicable for curing the cut body or brick under High Temperature and High Pressure. The working medium is Saturated Water Vapor.
The Main Parts are made by Autoclave Body, Cover, Hand-Operated reducer, Safe Blocking Device, Support Saddle, and Valve Meter etc. The body is a principle and cylindrical device made of steel. We fabricate a comprehensive range of Autoclaves which are preferred for their high tensile strength and better service life. Fabricated with the aid of advanced technology, these devices are minutely tested on quality grounds for ensuring better results.
Slurry Making Pit: It is a Fly Ash Slurry Tank in which we stored fly ash Slurry with law rotate speed, so it can keep slurry from precipitating.
|Delivery Time||3 month|
|Production Capacity||30 - 1000 Cubic meter|
|Payment Terms||T/T (Bank Transfer)|
Our operations are based on unique expertise in materials technology, extensive knowledge about industrial processes and close customer cooperation. This combination, coupled with continuous investments in research and development (R&D), has enabled us achieve leading positions in the following areas: