AB-707 Adhesive Sealants

₹ 500/ PieceGet Latest Price
Brand
Aswin
Usage/Application
Chemical Industry
Packaging Size
5-50 L
Packaging Type
HDPE Barrel
Application Industry
casting
As a prominent company, we are engaged in manufacturing a wide range of AB-707 Adhesive Sealants. It is also Known as Micro Porosity Thermostat Sealant.
Outstanding Features for better sealing with AB707 sealant:
- Sealant in monomer acrylic base.
- 100% Solid thermosetting sealant.
* Balanced viscosity ensure deep penetration.
* Will not bleed out. Voids remain filled during polymerization, producing a virtually indestructible seal.
* Cured AB707 is resistant to fuels, oils, alcohols, glycols, solvents, salts, mild acids and freons.
* Completely uninhibited by copper base alloy.
* Resist against temperature upto 450 c. The sealant will not rupture when the casting is subjected to
* extreme thermal or physical shock.
* Resist hydraulic pressure up to 10, 000 P.S.I.
* Will not discolor or distort parts, not it will affect established critical tolerance of machined parts.
Outstanding features for low cost and ease of "implant" operation of AB707 sealant:
* Aswin AB707 Sealant : Polyfunctional Methacrylate Monomer.
* It has excellent washability without the resin being left on the component.
* For curing the impregnated casting it is to be heated to 90 c in hot water
* for the polymerization of the resin within the metal.
* The range of Aswin AB707 resin take just 2 to 3 minutes when heated to 90 c and it take just
* 10 minutes for the full polymerization
* Extremely stable.
* Biodegradable & non injurious to human body.
* Low viscosity and high polarity ensure deep penetration, low material consumption and consequently,
* a lower cost per unit.
* Resist hydraulic pressure up to 10, 000 P.S.I.
* Will not discolor or distort parts, not it will affect established critical tolerance of machined parts.
* Does not emit disagreeable odour and therefore should not require any special ventilation.
* Provides quick positive cure for short cycle operation.
* Parts are ready for testing and can be used immediately after drying.
* Ensure a permanent seal and will last for the life of component
* Shelf life 15 months, if catalyst is not added.
Meets with the specification : IS – 12799 - 1989
Price Range:* Rs. 500-900/L

Exports To: Ethiopia | Cameroon

View Complete Details
Get Latest PriceRequest a quote

Ashwin Enterprise

Nikol, Ahmedabad, Gujarat
3.8/5 
★★★★★
★★★★★
 (4)
GST24ACSPP9496M1ZD
TrustSEAL Verified
Star Supplier
Manufacturer
 View Mobile Number 
88% Response Rate
Contact Supplier

Product Details

Company Details

Product Specification

BrandAswin
Usage/ApplicationChemical Industry
Packaging Size5-50 L
Packaging TypeHDPE Barrel
Application Industrycasting
Surface Of ApplicationSteel, Metal
Model Name/NumberAB 707
Grade StandardChemical Grade
Material CompatibilityMetal, Ceramic
TemperatureUpto 450 Degree C
Viscosity31 +/- 1 at 25 degree C
Shelf LifeIndefinite under recommended operating condition
Gel time at 90 C (0.2% AZDN Catalyst)Approximately 3 minutes
Flashpoint> 150 Degree C
Specific Gravity1.004-1.006 kg/m3 at 25 degree C

Product Description

As a prominent company, we are engaged in manufacturing a wide range of AB-707 Adhesive Sealants. It is also Known as Micro Porosity Thermostat Sealant.

Outstanding Features for better sealing with AB707 sealant:
  • Sealant in monomer acrylic base.
  • 100% Solid thermosetting sealant.
  • Balanced viscosity ensure deep penetration.
  • Will not bleed out. Voids remain filled during polymerization, producing a virtually indestructible seal.
  • Cured AB707 is resistant to fuels, oils, alcohols, glycols, solvents, salts, mild acids and freons.
  • Completely uninhibited by copper base alloy.
  • Resist against temperature upto 450 c. The sealant will not rupture when the casting is subjected to
  • extreme thermal or physical shock.
  • Resist hydraulic pressure up to 10,000 P.S.I.
  • Will not discolor or distort parts, not it will affect established critical tolerance of machined parts.
 
Outstanding features for low cost and ease of "implant" operation of AB707 sealant:
  • Aswin AB707 Sealant : Polyfunctional Methacrylate Monomer.
  • It has excellent washability without the resin being left on the component.
  • For curing the impregnated casting it is to be heated to 90 c in hot water
  • for the polymerization of the resin within the metal.
  • The range of Aswin AB707 resin take just 2 to 3 minutes when heated to 90 c and it take just
  • 10 minutes for the full polymerization
  • Extremely stable.
  • Biodegradable & non injurious to human body.
  • Low viscosity and high polarity ensure deep penetration, low material consumption and consequently,
  • a lower cost per unit.
  • Resist hydraulic pressure up to 10,000 P.S.I.
  • Will not discolor or distort parts, not it will affect established critical tolerance of machined parts.
  • Does not emit disagreeable odour and therefore should not require any special ventilation.
  • Provides quick positive cure for short cycle operation.
  • Parts are ready for testing and can be used immediately after drying.
  • Ensure a permanent seal and will last for the life of component
  • Shelf life 15 months, if catalyst is not added.

 

Meets with the specification : IS – 12799 - 1989


Price Range:

  • Rs. 500-900/L

Interested in this product?Get Latest Price from the seller
Contact Seller

About the Company

Year of Establishment1983
Legal Status of FirmIndividual - Proprietor
Nature of BusinessManufacturer
Number of Employees26 To 50 People
Annual TurnoverRs. 2 - 5 Crore
IndiaMART Member SinceSept 2009
GST24ACSPP9496M1ZD
Import Export Code (IEC)08040*****
Exports to Ethiopia | Cameroon
Established as a Sole Proprietorship firm at Ahmedabad (Gujarat, India), we “Aswin Enterprise” are distinguished Manufacturer, Wholesaler, Exporter, Trader and Importer of comprehensive assortment of Vacuum Impregnation Plant and System, IM 3000 Impregnating Resins, AB-707 Adhesive Sealants, Zinc Phosphating Chemical,etc. We export our products in Pakistan. These products are manufactured by our deft professionals using best grade raw material and advanced techniques. Under the able direction of our mentor, “Mr. Naresh Patel”, we are able to satisfy our vast client-base.
AB-707 Adhesive Sealants
AB-707 Adhesive Sealants
termsprivacy policy

Seller Contact Details

Naresh Patel

19/27, Muktidham Estate, Near Jivanwadi, Nikol Ahmedabad - 382350, Gujarat, India

Get Directions
View Mobile No.
Send SMS
Send Email