ACC 28-30ml Fixotile Cement
Get Latest Price
Brand | ACC |
Compressive Strength | 28days 1.5 M Pa |
Slip Resistance | less then O.5mm (T) |
Open Time | Greater Then 20 Minutes |
Water Demand | 28-30ml for 100gms powder |
General Description: Adhesive Mortar FIXOTlLE-Tile Fixing is carefully proportioned high quality raw materials requirements. blend of FIXOTILE confirms to EN FIXOTILE comes in specially designed high quality PP laminated bags. Use No Hooks Uses: Fixing Tiles (Ceramic, Mortars for floorings Vitrified & walling, & Mosaic) including cladding works viz. tile/granite etc.
Instructions for Use:
- Preparation: For floors -if any defective flooring & levels are observed, fill it with ACCOPLAST
- Dry Mortar application. For walls - clean the loose dirt particles and rub it with sand paper/wire brush. If required chip it to get good bearing. If the wall plaster is not good in condition & loose chip off completely and reapply plaster.
* Mixing: Mix FIXOTILE in a clean bucket with approx. S.5-6 Itrs of potable water depending on consistency required. Stir for 5-10 minutes by hand or mechanical blender to make it a homogeneous butter like mortar paste. Allow
* this mixture to stand for next 3-5 minutes. Re-mix again for 2-3 minutes.
* Placing: The above mixture is to be used within next 20minutes by applying over masonry surfaces in thickness of 2-3mm by using notched trowel or equivalent tools.
* Curing: For most ambient conditions no special curing is required. In fast drying conditions, such as direct sun or warm winds, mist spraying or temporary covering should be applied over mixture.
Applications:
* Tile On Tile(TOT) & Tile On Substrates(TOS)Applications(Both external & internal floorings & vertical walling)
* Tile Repairs & Rehabilitation Works
* Allspecial tiling works(i.e tiling on GPS floorings or PVF applications, Mirrors/Glass fixings on walls)
Advantages:
* High Quality & Easy to Store dry pre-mixed powders in ready to use bags.
* Quick drying & setting.
* Good adhesion control gives strong bonding.
* Helpsin higher productivity & turn over.
Features & Benefits:
* Manufactured & mixed in environment with high level of automation.
* Packed in specially designed PP laminated bagsto protect from moisture.
* Improved surface quality, greater impactresistance & water resistant benefits leads togreater toughness.
* Less permeable & increased durability Low wastages
* General Guidelines & Methodology: Before applications, wash the plastering surface on which ACCOPlast - FIXOTILE Mortar is to be applied. Drain off excess water. Good practice suggests keeping the tiles immersed in water, 2 hr prior to application. During application of FIXOTILE, use clean steel trowel/blade and apply in thickness of 2-3mmon plaster bed or on tile back, but not both. Place the adjustment tile immediately onto the notched mortar and lap into place both x & y axis. Due to the thixotropy and grab of the FIXOTILE Mortar, it makes easy for tile to place and align using wooden
Health & Safety:
* Use proper PPEs to avoid respiratory disorders, skinirritation or contact with eyes. Keep out of reach of children. In case of contact, apply fresh running water for 5-10 minutes and seek further medical help. FIXOTILE mortar when mixed with water is alkaline in nature. Itis non-flammable.
* Important Information: Instructions in brochure are general in nature. An experienced technical advisory team is available to give technical details upon request. Kindly contact the below addressed
Instructions for Use:
- Preparation: For floors -if any defective flooring & levels are observed, fill it with ACCOPLAST
- Dry Mortar application. For walls - clean the loose dirt particles and rub it with sand paper/wire brush. If required chip it to get good bearing. If the wall plaster is not good in condition & loose chip off completely and reapply plaster.
* Mixing: Mix FIXOTILE in a clean bucket with approx. S.5-6 Itrs of potable water depending on consistency required. Stir for 5-10 minutes by hand or mechanical blender to make it a homogeneous butter like mortar paste. Allow
* this mixture to stand for next 3-5 minutes. Re-mix again for 2-3 minutes.
* Placing: The above mixture is to be used within next 20minutes by applying over masonry surfaces in thickness of 2-3mm by using notched trowel or equivalent tools.
* Curing: For most ambient conditions no special curing is required. In fast drying conditions, such as direct sun or warm winds, mist spraying or temporary covering should be applied over mixture.
Applications:
* Tile On Tile(TOT) & Tile On Substrates(TOS)Applications(Both external & internal floorings & vertical walling)
* Tile Repairs & Rehabilitation Works
* Allspecial tiling works(i.e tiling on GPS floorings or PVF applications, Mirrors/Glass fixings on walls)
Advantages:
* High Quality & Easy to Store dry pre-mixed powders in ready to use bags.
* Quick drying & setting.
* Good adhesion control gives strong bonding.
* Helpsin higher productivity & turn over.
Features & Benefits:
* Manufactured & mixed in environment with high level of automation.
* Packed in specially designed PP laminated bagsto protect from moisture.
* Improved surface quality, greater impactresistance & water resistant benefits leads togreater toughness.
* Less permeable & increased durability Low wastages
* General Guidelines & Methodology: Before applications, wash the plastering surface on which ACCOPlast - FIXOTILE Mortar is to be applied. Drain off excess water. Good practice suggests keeping the tiles immersed in water, 2 hr prior to application. During application of FIXOTILE, use clean steel trowel/blade and apply in thickness of 2-3mmon plaster bed or on tile back, but not both. Place the adjustment tile immediately onto the notched mortar and lap into place both x & y axis. Due to the thixotropy and grab of the FIXOTILE Mortar, it makes easy for tile to place and align using wooden
Health & Safety:
* Use proper PPEs to avoid respiratory disorders, skinirritation or contact with eyes. Keep out of reach of children. In case of contact, apply fresh running water for 5-10 minutes and seek further medical help. FIXOTILE mortar when mixed with water is alkaline in nature. Itis non-flammable.
* Important Information: Instructions in brochure are general in nature. An experienced technical advisory team is available to give technical details upon request. Kindly contact the below addressed
View Complete Details
Get Latest PriceRequest a quote
Product Details
Company Details
Product Specification
Brand | ACC |
Compressive Strength | 28days 1.5 M Pa |
Slip Resistance | less then O.5mm (T) |
Open Time | Greater Then 20 Minutes |
Water Demand | 28-30ml for 100gms powder |
Tensile Adhesion Strength | Upto 12M Pa |
Product Description
General Description: Adhesive Mortar FIXOTlLE-Tile Fixing is carefully proportioned high quality raw materials requirements. blend of FIXOTILE confirms to EN FIXOTILE comes in specially designed high quality PP laminated bags. Use No Hooks Uses: Fixing Tiles (Ceramic, Mortars for floorings Vitrified & walling, & Mosaic) including cladding works viz. tile/granite etc.
Instructions for Use:
Applications:
Advantages:
Features & Benefits:
Health & Safety:
Instructions for Use:
- Preparation: For floors -if any defective flooring & levels are observed, fill it with ACCOPLAST
- Dry Mortar application. For walls - clean the loose dirt particles and rub it with sand paper/wire brush. If required chip it to get good bearing. If the wall plaster is not good in condition & loose chip off completely and reapply plaster.
- Mixing: Mix FIXOTILE in a clean bucket with approx. S.5-6 Itrs of potable water depending on consistency required. Stir for 5-10 minutes by hand or mechanical blender to make it a homogeneous butter like mortar paste. Allow
- this mixture to stand for next 3-5 minutes. Re-mix again for 2-3 minutes.
- Placing: The above mixture is to be used within next 20minutes by applying over masonry surfaces in thickness of 2-3mm by using notched trowel or equivalent tools.
- Curing: For most ambient conditions no special curing is required. In fast drying conditions, such as direct sun or warm winds, mist spraying or temporary covering should be applied over mixture.
Applications:
- Tile On Tile(TOT) & Tile On Substrates(TOS)Applications(Both external & internal floorings & vertical walling)
- Tile Repairs & Rehabilitation Works
- Allspecial tiling works(i.e tiling on GPS floorings or PVF applications, Mirrors/Glass fixings on walls)
Advantages:
- High Quality & Easy to Store dry pre-mixed powders in ready to use bags.
- Quick drying & setting.
- Good adhesion control gives strong bonding.
- Helpsin higher productivity & turn over.
Features & Benefits:
- Manufactured & mixed in environment with high level of automation.
- Packed in specially designed PP laminated bagsto protect from moisture.
- Improved surface quality, greater impactresistance & water resistant benefits leads togreater toughness.
- Less permeable & increased durability Low wastages
- General Guidelines & Methodology: Before applications, wash the plastering surface on which ACCOPlast - FIXOTILE Mortar is to be applied. Drain off excess water. Good practice suggests keeping the tiles immersed in water, 2 hr prior to application. During application of FIXOTILE, use clean steel trowel/blade and apply in thickness of 2-3mmon plaster bed or on tile back, but not both. Place the adjustment tile immediately onto the notched mortar and lap into place both x & y axis. Due to the thixotropy and grab of the FIXOTILE Mortar, it makes easy for tile to place and align using wooden
Health & Safety:
- Use proper PPEs to avoid respiratory disorders, skinirritation or contact with eyes. Keep out of reach of children. In case of contact, apply fresh running water for 5-10 minutes and seek further medical help. FIXOTILE mortar when mixed with water is alkaline in nature. Itis non-flammable.
- Important Information: Instructions in brochure are general in nature. An experienced technical advisory team is available to give technical details upon request. Kindly contact the below addressed
Interested in this product?Get Latest Price from the seller
Contact Seller
About the Company
Year of Establishment1936
Legal Status of FirmLimited Company (Ltd./Pvt.Ltd.)
Nature of BusinessManufacturer
Number of Employees51 To 100 People
Annual TurnoverMore Than Rs. 10000 Crore
IndiaMART Member SinceOct 2008
GST27AAACT1507C1ZX
Import Export Code (IEC)03880*****
Seller Contact Details
Aman Ragashe
Acc Complex, Lbs Marg, Thane ( W ) Mumbai - 400604, Maharashtra, India
Get DirectionsView Mobile No.
Send SMS
Send Email