Pink Adhesive Premix, For Industrial

This Adhesive Premix is compounded by using the very special Resin/Polymer combination of Sona Meta Chem, With the structure of binders and the high fibrous matrix of the adhesive premix the holding capacity of the back plate and friction material is considerably higher in heavy operating condition (such as higher temperatures, higher shear forces) than traditional glues. This is best suited where high temperature is needed as most of the organic glues can decompose at a lower temperature.
Benefit Over The Traditional Glues:
- Minimum 25% higher temperature resistance compared to all organic glues.
- With the created layer between back plate and the friction material, it behaves also as an anti-noise ship by changing the resonance frequency from the hearable values to non-hearable values.
* With the created layer between back plate and the friction of the material, it behaves as a heat barrier between the friction materials and back plate/actuating piston.
* If asked for special application “the same premix with increased thermal conductivity) is available with more metallic structure.
* Shear tests according to have been performed for hot pressed disc pads and noticed that the shear strength value was always more than 250N/cm2 with 100% retention, same test have been performed after constant pressure Dyno test (in which at least 5 times the disc pad has been overheated) and noticed that the shear strength value was still more than 250N/cm2 with 100% retention.