Alloy Steel Turning Scrap

Tradewell Ferromet Pvt. Ltd. is actively engaged in supplies of quality products in grades of STAINLESS STEEL, DUPLEX STEEL, ALLOY STEEL, TOOL STEEL, CARBON STEEL and HIGH NICKEL ALLOYS.

Our Products Range Consists:

Flanges - Slip-On, Blind, Weld Neck, Long Weld Neck, Lap Joint, Socket Weld, Threaded, Spectacle Blind.

Bars - Round Bars, Hexagonal Bars, Square Bars, Rectangular Bars, Flat Bars & Hollow Bars.

Pipes & Tubes - Seamless & Welded (ERW, EFW, SAW, LSAW, SPIRAL).

Pipe Fittings - Butt Weld, Socket Weld, Screwed & Forged Fittings (Elbow, Reducer, Tee, Cap, Nipple, Coupling).

STANDARDS: ASTM, ASME, API, ANSI, BS, DIN, JIS, ISO
Fasteners – Studs, Nuts, Washers, Bolts & Screws.
STANDARDS: DIN / ISO / EN / IS / ASME can be offer as both Metric & Imperial Inch sizes
Other Products - Rings, Circles, Sheets & Plates , Angles & Channels

Our company is associated with many Indian Manufacturing units. This is one of the reasons that we serve quality product with fastest possible delivery being most competitive.

Our AIM is to satisfy the customer with quality & service as per their requirement and thus have a lifelong association.

Major grades which we SPECIALIZE in are as follows :

PIPES, TUBINGS, PIPE FITTINGS & FLANGES

CARBON STEEL: ASTM A 106 GR. A, B & C, ASTM A 350 LF1, LF2 and LF3, API 5L GR. B, A333 GR 6, X42, X52, IS 1239, IS 3589
ALLOY STEEL: ASTM A519 4130/AISI 4130, AISI 4140, AISI 4340, ASTM A335 GR. P5, P9, P11, P22, P91, ASTM A213 T5,T9,T11,T12,T22,T91, ASTM A182 F5,F9,F11,F12,F22,F91, EN19, EN24
STAINLESS STEEL: ASTM A 182 F304/L, 316/L, 304H, 321/H, 347/H, 904L, ASTM A 182 F309, F310, F310s, F310H
DUPLEX STEEL: UNS S31803, S32205, S32750, S32760, ASTM A694 F51, F52, F53, F54, F57, F59, F60, F61.

OTHER STEELS: Cupro Nickel Alloys 70/30 – 90/10, 15-5Ph , 17-4Ph (AISI 630), Titanium grades 1 upto 11, Alloy 20 / WP20CB, Nickel 200 , 201 (UNS No. 02200 and UNS No. 02201), Alloy 400 (UNS No. 04400 - Monel), Alloy C276, B2, C4, G30 (UNS No. 01276, UNS No. 10665 - Hastelloy), Alloy 600, 625, 601, 718 (UNS No. 06600, UNS No. 06625 – Inconel), Alloy 800 H/T , 825 (UNS No. 08800, UNS No. 08825 - Incolloy)

ADDITIONAL GRADES FOR FASTENERS

CARBON STEEL: Grade 5, 8.8, 12.9
STAINLESS STEEL: 303, 304, 304L, 309, 309H, 309S, 310, 310S, 310H, 316, 316H, 316L, 316Ti, 317, 317L, 321, 321H, 347, 347H, 409, 409L, 410, 416, 419, 420, 421, 429, 430F, 446C
PRECIPITATION HARDENING STEEL: 13-8pH, 15-4pH, 17-4pH & 17-7 pH.
DUPLEX STEEL: S31803, S32205, S32750, S32760, F51, F52, F53, F54, F57, F59, F60, F61, Ferralium Alloy 255
NICKEL ALLOY: Inconel 600, Inconel 601, Inconel 625, Inconel 718, etc.
OTHER STEELS: Monel 400 , Monel K500, Hastelloy B2, Hastelloy C22, Hastelloy C276, Nitronic 50, Nitronic 60, Nitronic 75, Copper Nickel 70/30, Copper Nickel 90/10, Aluminum Bronze, Phosphor Bronze, Silicon Bronze, Titanium Alloy 2, 5, 7

ADDITIONAL GRADES FOR BARS, RINGS, CIRCLES, SHEETS & PLATES, ANGLES & CHANNELS.
TOOL STEEL: H11, H13, DIN 1.2714, DIN 1.2343, DIN 1.2344, DIN 1.2379, SKD60, SKD61

Other grades not listed above can also be provided on make to order basis.

Any requirements from any of the listed products do not hesitate to contact us.