Amcos Leak Stopper is an elastomeric water proofing emulsion having very good elasticity and it is designed with a photo initiator technology which cures the film on exposure to sunlight and from a highly durable coating. Application of Amcos Leak Stopper will prevent water leakages through cracks and other defects in the terrace. The white leak stopper applied on terrace will reflect sunlight thus reduces the room temperature. Amcos leak stopper is designed to prevent the algal fungal growth thus remains white for long time
Surface preparation is very important and a critical part determining the life of the coating. Surface should be completely cured and properly cleaned by pressure wash. A bio wash is required for avoiding any chances of mold, mildew, algae growth.Surface should be free form dust, moisture, grease or loose particles. Apply Amcos Leak Stopper only to sound and well prepared roof surface. If not, necessary civil work is required. Cracks should be properly sealed (Hairline cracks using Amcos Master Seal, cracks up to 2 mm using Amcos Seal and Fill and cracks above 2 mm should be addressed by civil maintenance work). If the plastered surface required extra bonding, a sealer coat – Amcos Leak Stopper is recommended prior to the application of the product which helps to lock down slight loose sands on roof surface. Ensure that a proper slope is maintained at the terrace to avoid any stagnant water.
Recommended application methodDirections Of use
Mix well Amcos Leak Stopper with water in recommended dilution ratio. Apply first coat vertically and allow to dry for 4-6 hours. After complete drying, apply second coat of Leak Stopper horizontally and allow to dry
Technical Data
Dilution : 50% with clean and fresh water Forced coverage : 30-35 q.ft./ kg/ for 2 coats. Surface dry : 45 minutes Hard dry : 6 hours Recoating interval : 12 hours
PackingColour
Mix well before use. Actual coverage may vary depending upon the method and conditions of application, surface conditions, application skill, surface roughness and porosity etc. of thinned paint - 24 hours. Do not apply on damp and uncured walls directly. On mild damp wall and fresh walls it is highly recommended to apply one coat of Amcos Plastic Sealer Hairline cracks can be filled by Amcos Master Seal . Cracks up to 2 mm can be filled by Amcos Seal and Fill. Cracks above 2 mm should be addressed by civil work. Recoat period is quoted for 25°c and 50% relative humidity, these may vary under different conditions. The paint film required at least one week time for complete curing under normal atmospheric conditions. It is advisable to check and maintain the diluted paints consistency in certain intervals based on atmospheric conditions to avoid application issues such as poor finish and less coverage due to solvent evaporation Keep the container tightly closed after opening to prevent drying. Shelf life: 3 years from date of manufacture in original tightly closed containers away from direct sunlight and excessive heat.
Wear masks, gloves, safety goggles and protective clothing while handling and application of paint. Keep out of reach of children and away from eatables. Store paints away from direct sunlight, heat open fire and water Do not pour the leftover paints in drains. Dispose off the paint left overs and containers as per local regulations.
Find products similar to Amcos Leak Stopper Waterproof Emulsion Paint
Established in the year 2002 at, Ernakulam, Kerala, we “Amcosxl Paints(India)Pvt Ltd” are acknowledged organization and are Pvt. Ltd firm, engaged as Manufacturer of Exterior Emulsion Paint, Acrylic Distemper Paint etc.
With the successful beginning in 2002, Amcos Paints stood firmly for delivering high quality products with the help of advanced technology at the early stage itself. Our focus was solely on doing researches through which we could introduce an art of producing quality assured Paints in order to build safer, better, sustainable and healthier coating solutions.
With the unique approach and great vision of our Chairman and Managing Director, we've created a great space in the paint market. We became a trusted brand among customers, dealers and vendors by adapting changes in the market and thus delivering quality products.
We started with a very small unit at Cheranallur, Kochi and later moved to IDA Edayar, Kochi with a better manufacturing facility. We started a new Plant in Mavelikkara in 2005 so as to meet the market demand. To meet the market potential, a dedicated solvent based Plant will be started at Palakkad soon.To increase the market share and to expand our business to other States, a new manufacturing facility will be started in Kannur in the next financial year.
At Amcos Paints, we believe in delivering high quality &Eco friendly products developed through our own unique technology and thereby gaining Customer satisfaction and their happiness!
