Schneider APC BE800-IND 230V Back UPS
Get Latest Price
Maximum Depth | 290 mm,29.0 cm |
Maximum Height | 130 mm,13.0 cm |
Shipping Width | 270 mm,27.0 cm |
Maximum Width | 220 mm,22.0 cm |
Shipping Depth | 410 mm,41.0 cm |
Features :
- Audible alarms: Provides notification of changing utility power and UPS power conditions
- Automatic self-test: Periodic battery self-test ensures early detection of a battery that needs to be replaced.
* Battery-protected and surge-only outlets: Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment
* Boost and Trim Automatic Voltage Regulation (AVR): Eliminates voltage fluctuations as a source of AV signal degradation and component power-supply stress.
* Cold-start capable: Provides temporary battery power when the utility power is out.
* LED Indicators: Provide easy-to-read status of the unit and utility power conditions.
* USB connectivity: Provides management Features of the UPS via a USB port (not available on all models).
* User-replaceable batteries: Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
Back-UPS Features & Benefits* Battery-protected and surge-only outlets: Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment
* Safety-agency approved: Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
* LED status display: Quickly understand unit and power status with visual indicators.
* Automatic self-test: Periodic battery self-test ensures early detection of a battery that needs to be replaced.
* Battery failure notification: Provides early-warning fault analysis on batteries enabling timely preventive maintenance
* Intelligent battery management: Maximizes battery performance, life, and reliability through intelligent, precision charging.
* Surge only outlets: Protect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage.
* Battery and surge protected outlets: Back up and protect your hardware and data during power outages, surges and spikes.
* Control panel: LED status display with On Line: On Battery: Replace Battery and Overload indicators
* Audible Alarm: Alarm when on battery: distinctive low battery alarm: overload continuous tone alarm
Other Details:* Three battery back-up outlets with surge protection for computers, modems, routers etc.
* One surge protection-only outlet protects hardware like scanners and printers etc.
* Power on button provides power to connected equipment.
* Push-button circuit breaker provides easy recovery from an overload or short circuit.
* Automatic voltage regulation (AVR) instantly corrects incoming utility power without utilizing the battery.
- Audible alarms: Provides notification of changing utility power and UPS power conditions
- Automatic self-test: Periodic battery self-test ensures early detection of a battery that needs to be replaced.
* Battery-protected and surge-only outlets: Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment
* Boost and Trim Automatic Voltage Regulation (AVR): Eliminates voltage fluctuations as a source of AV signal degradation and component power-supply stress.
* Cold-start capable: Provides temporary battery power when the utility power is out.
* LED Indicators: Provide easy-to-read status of the unit and utility power conditions.
* USB connectivity: Provides management Features of the UPS via a USB port (not available on all models).
* User-replaceable batteries: Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
Back-UPS Features & Benefits* Battery-protected and surge-only outlets: Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment
* Safety-agency approved: Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
* LED status display: Quickly understand unit and power status with visual indicators.
* Automatic self-test: Periodic battery self-test ensures early detection of a battery that needs to be replaced.
* Battery failure notification: Provides early-warning fault analysis on batteries enabling timely preventive maintenance
* Intelligent battery management: Maximizes battery performance, life, and reliability through intelligent, precision charging.
* Surge only outlets: Protect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage.
* Battery and surge protected outlets: Back up and protect your hardware and data during power outages, surges and spikes.
* Control panel: LED status display with On Line: On Battery: Replace Battery and Overload indicators
* Audible Alarm: Alarm when on battery: distinctive low battery alarm: overload continuous tone alarm
Other Details:* Three battery back-up outlets with surge protection for computers, modems, routers etc.
* One surge protection-only outlet protects hardware like scanners and printers etc.
* Power on button provides power to connected equipment.
* Push-button circuit breaker provides easy recovery from an overload or short circuit.
* Automatic voltage regulation (AVR) instantly corrects incoming utility power without utilizing the battery.
View Complete Details
Get Latest PriceRequest a quote
TrustSEAL Verified
Leading Supplier
Manufacturer
View Mobile Number
80% Response RateContact Supplier
Product Details
Company Details
Product Specification
Maximum Depth | 290 mm,29.0 cm |
Maximum Height | 130 mm,13.0 cm |
Shipping Width | 270 mm,27.0 cm |
Maximum Width | 220 mm,22.0 cm |
Shipping Depth | 410 mm,41.0 cm |
Storage Elevation | 0-9000 Meters |
Battery Type | Maintenance-free sealed Lead-Acid battery with suspended electrolyte leakproof |
Storage Temperature | 0 - 45 Degree C |
Operating Temperature | 0 - 40 Degree C |
Brand | APC By Schneider |
Topology | Line Interactive |
Output power capacity | 480 Watts / 800 VA |
Shipping weight | 10.0 Kg |
Filtering | Full time multi-pole noise filtering5% IEEE surge let-throughzero clamping response timemeetsUL |
Expected Battery Life | 2 - 4 years |
Typical recharge time | 8 Hour(s) |
Surge energy rating | 160 Joules |
Audible Noise From Surface of Unit | 1 meter 45.0 dBA |
Storage Relative Humidity | 0-95 % |
Input Efficiency at Full Load | 95.0 % |
Max Configurable Power | 480 Watts / 800 VA |
Operating Elevation | 0-3000 Meters |
Operating Relative Humidity | 0-95 % |
Shipping Height | 170 mm,17.0 cm |
Efficiency at Full Load | 95.0 % |
Input Connections | India 3-pin 6A |
RoHS | Compliant |
Standard warranty | 2 Years Repair or Replace |
Online thermal dissipation | 42.68 BTU/hr |
Input frequency | 50 Hz +/- 3 Hz |
REACH | Contains No SVHCs |
Nominal Output Voltage | 230 V |
Net Weight | 9.0 Kg |
Nominal Input Voltage | 230 V |
Waveform type | Stepped approximation to a sinewave |
Output Frequency not synced | 50 Hz +/- 0.1% for 50 Hz nominal |
Output Frequency sync to mains | 47 - 63 Hz |
Number of Power Cords | 1 |
Product Description
Features :
- Audible alarms: Provides notification of changing utility power and UPS power conditions
- Automatic self-test: Periodic battery self-test ensures early detection of a battery that needs to be replaced.
- Battery-protected and surge-only outlets: Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment
- Boost and Trim Automatic Voltage Regulation (AVR): Eliminates voltage fluctuations as a source of AV signal degradation and component power-supply stress.
- Cold-start capable: Provides temporary battery power when the utility power is out.
- LED Indicators: Provide easy-to-read status of the unit and utility power conditions.
- USB connectivity: Provides management Features of the UPS via a USB port (not available on all models).
- User-replaceable batteries: Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
Back-UPS Features & Benefits
- Battery-protected and surge-only outlets: Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment
- Safety-agency approved: Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
- LED status display: Quickly understand unit and power status with visual indicators.
- Automatic self-test: Periodic battery self-test ensures early detection of a battery that needs to be replaced.
- Battery failure notification: Provides early-warning fault analysis on batteries enabling timely preventive maintenance
- Intelligent battery management: Maximizes battery performance, life, and reliability through intelligent, precision charging.
- Surge only outlets: Protect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage.
- Battery and surge protected outlets: Back up and protect your hardware and data during power outages, surges and spikes.
- Control panel: LED status display with On Line: On Battery: Replace Battery and Overload indicators
- Audible Alarm: Alarm when on battery: distinctive low battery alarm: overload continuous tone alarm
Other Details:
- Three battery back-up outlets with surge protection for computers, modems, routers etc.
- One surge protection-only outlet protects hardware like scanners and printers etc.
- Power on button provides power to connected equipment.
- Push-button circuit breaker provides easy recovery from an overload or short circuit.
- Automatic voltage regulation (AVR) instantly corrects incoming utility power without utilizing the battery.
Interested in this product?Get Latest Price from the seller
Contact Seller
About the Company
Year of Establishment1963
Legal Status of FirmLimited Company (Ltd./Pvt.Ltd.)
Nature of BusinessManufacturer
Number of Employees501 To 1000 People
Annual TurnoverUpto Rs. 50 Lakh
IndiaMART Member SinceFeb 2012
GST06AABCS1624G2ZQ
Import Export Code (IEC)05950*****
By posting an enquiry for the products in Schneider Electric catalog on Indiamart, you agree, Indiamart to provide your contact information to Schneider Electric and agree to the Schneider Electric Privacy Policy so they can share the required quotation/information with you by email, post or telephone or any other electronic communication.
You may unsubscribe from receiving news and offers from the sender at any time by following the instructions in the communications received. Schneider Electric handles your information as described in the Schneider Electric Privacy Notice. For questions about how Schneider Electric will handle your information, please contact Schneider Electric directly or refer to its privacy policy at https://
You may unsubscribe from receiving news and offers from the sender at any time by following the instructions in the communications received. Schneider Electric handles your information as described in the Schneider Electric Privacy Notice. For questions about how Schneider Electric will handle your information, please contact Schneider Electric directly or refer to its privacy policy at https://
Seller Contact Details
LMS Executive
Bearys Global Research Triangle, Whitefield Hoskote Road, Pratap Vihar Bengaluru - 560115, Karnataka, India
Get DirectionsView Mobile No.
Send SMS
Send Email