Schneider APC BR1000G-IN 230V Back UPS

Get Latest Price
Shipping Width
229 mm,22.9 cm
Maximum Width
114 mm,11.4 cm
Battery Type
Maintenance-free sealed Lead-Acid battery with suspended electrolyte leakproof
Storage Temperature
-15 to 45 Degree C
Operating Temperature
0 - 40 Degree C
Features :
- Adjustable voltage sensitivity: Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.
- Adjustable voltage-transfer points: Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.
* Audible alarms: Provides notification of changing utility power and UPS power conditions
* Automatic self-test: Periodic battery self-test ensures early detection of a battery that needs to be replaced.
* Battery failure notification: Provides early-warning fault analysis on batteries enabling timely preventive maintenance
* Battery replacement without tools: Enables fast battery replacement, lowering Mean Time to Repair (MTTR).
* Battery-protected and surge-only outlets: Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment
* Boost and Trim Automatic Voltage Regulation (AVR): Eliminates voltage fluctuations as a source of AV signal degradation and component power-supply stress.
* Building Wiring Fault Indicator: This LED informs users of potentially dangerous wiring problems in the wall circuit.
* Cold-start capable: Provides temporary battery power when the utility power is out.
* Dataline surge protection: Provides protection of connected equipment from power surges on the data lines.
* Disconnected battery notification: Warns when a battery is not available to provide backup power.
* Green mode: Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
* Hot-swappable batteries: Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
* Intelligent battery management: Maximizes battery performance, life, and reliability through intelligent, precision charging.
* LCD graphics display: Text and mimic diagrams that display modes of operation, system parameters and alarms.
* Power-saving outlets: Automatically cuts power to idle equipment to conserve electricity.
* Resettable circuit breaker: Easy recovery from overloads; no need to replace a fuse.
* Serial connectivity: Use any Home Automation network to monitor and control the S20 through its RS-232 serial port. For information on how to communicate with the S20, see APC's Application Note #102. Crestron and AMX installers should visit their respective websites for information on how to integrate the S20 into those networks.
* USB connectivity: Provides management of the UPS via a USB port (not available on all models).
* User-replaceable batteries: Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
* Customizable voltage-transfer points: Adjust the voltage points (widen or tighten the range) where your UPS transfers to battery to maximize useful battery life and protect sensitive electronics.
* Green mode: Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
* Boost and Trim Automatic Voltage Regulation (AVR): Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).
View Complete Details
Get Latest PriceRequest a quote

Schneider Electric India Private Limited

Pratap Vihar, Bengaluru, Karnataka
4.5/5 
★★★★★
★★★★★
 (54)
GST06AABCS1624G2ZQ
TrustSEAL Verified
Leading Supplier
Manufacturer
 View Mobile Number 
80% Response Rate
Contact Supplier

Product Details

Company Details

Product Specification

Shipping Width229 mm,22.9 cm
Maximum Width114 mm,11.4 cm
Battery TypeMaintenance-free sealed Lead-Acid battery with suspended electrolyte leakproof
Storage Temperature-15 to 45 Degree C
Operating Temperature0 - 40 Degree C
BrandAPC By Schneider
Typical Recharge Time7.4 Hour(s)
Output power capacity600 Watts / 1.0 kVA
RBC Quantity1
Output Frequency sync to mains50/60 Hz +/-1 Hz
REACHContains No SVHCs
Operating Elevation0-3000 Meters
Operating Relative Humidity0 - 95 %
Number of Power Cords1
Standard Warranty2 Years Repair Or Replace
Surge energy rating680 Joules
Waveform typeStepped approximation to a sinewave
Storage Relative Humidity0-95 %
Nominal Output Voltage230 V
Shipping Height381mm,38.1 cm
Shipping weight12.77 kg
RoHSCompliant
Master Carton Weight27.2 gm
Extendable Run Time1
Input ConnectionsIndia 3-pin 6A
Expected Battery Life2 - 4 years
Efficiency at Full Load84.0 %
Audible Noise From Surface of Unit1 Meter 45.0 dBA
Cord Length1.52 Meters
Input Efficiency at Full Load84.0 %
Input frequency50/60 Hz +/- 3 Hz (auto sensing)
Max Configurable Power600 Watts / 1.0 kVA
Net Weight11.35 kg
Master Carton Units2.0
Interface Port sUSB
Input voltage range for main operations150 - 280 V
Nominal Input Voltage230 V

Product Description

Features :
  • Adjustable voltage sensitivity: Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.
  • Adjustable voltage-transfer points: Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.
  • Audible alarms: Provides notification of changing utility power and UPS power conditions
  • Automatic self-test: Periodic battery self-test ensures early detection of a battery that needs to be replaced.
  • Battery failure notification: Provides early-warning fault analysis on batteries enabling timely preventive maintenance
  • Battery replacement without tools: Enables fast battery replacement, lowering Mean Time to Repair (MTTR).
  • Battery-protected and surge-only outlets: Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment
  • Boost and Trim Automatic Voltage Regulation (AVR): Eliminates voltage fluctuations as a source of AV signal degradation and component power-supply stress.
  • Building Wiring Fault Indicator: This LED informs users of potentially dangerous wiring problems in the wall circuit.
  • Cold-start capable: Provides temporary battery power when the utility power is out.
  • Dataline surge protection: Provides protection of connected equipment from power surges on the data lines.
  • Disconnected battery notification: Warns when a battery is not available to provide backup power.
  • Green mode: Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
  • Hot-swappable batteries: Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
  • Intelligent battery management: Maximizes battery performance, life, and reliability through intelligent, precision charging.
  • LCD graphics display: Text and mimic diagrams that display modes of operation, system parameters and alarms.
  • Power-saving outlets: Automatically cuts power to idle equipment to conserve electricity.
  • Resettable circuit breaker: Easy recovery from overloads; no need to replace a fuse.
  • Serial connectivity: Use any Home Automation network to monitor and control the S20 through its RS-232 serial port. For information on how to communicate with the S20, see APC's Application Note #102. Crestron and AMX installers should visit their respective websites for information on how to integrate the S20 into those networks.
  • USB connectivity: Provides management of the UPS via a USB port (not available on all models).
  • User-replaceable batteries: Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
  • Customizable voltage-transfer points: Adjust the voltage points (widen or tighten the range) where your UPS transfers to battery to maximize useful battery life and protect sensitive electronics.
  • Green mode: Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
  • Boost and Trim Automatic Voltage Regulation (AVR): Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).

Interested in this product?Get Latest Price from the seller
Contact Seller

About the Company

Year of Establishment1963
Legal Status of FirmLimited Company (Ltd./Pvt.Ltd.)
Nature of BusinessManufacturer
Number of Employees501 To 1000 People
Annual TurnoverUpto Rs. 50 Lakh
IndiaMART Member SinceFeb 2012
GST06AABCS1624G2ZQ
Import Export Code (IEC)05950*****
By posting an enquiry for the products in Schneider Electric catalog on Indiamart, you agree, Indiamart to provide your contact information to Schneider Electric and agree to the Schneider Electric Privacy Policy so they can share the required quotation/information with you by email, post or telephone or any other electronic communication.
You may unsubscribe from receiving news and offers from the sender at any time by following the instructions in the communications received. Schneider Electric handles your information as described in the Schneider Electric Privacy Notice. For questions about how Schneider Electric will handle your information, please contact Schneider Electric directly or refer to its privacy policy at https://
Schneider APC BR1000G-IN 230V Back UPS
Schneider APC BR1000G-IN 230V Back UPS
termsprivacy policy

Seller Contact Details

LMS Executive

Bearys Global Research Triangle, Whitefield Hoskote Road, Pratap Vihar Bengaluru - 560115, Karnataka, India

Get Directions
View Mobile No.
Send SMS
Send Email