Home > Paints, Wall Putty & Varnishes > Emulsion Paints > Asian Emulsion Paints
Apcolite Advanced Emulsion Paint
mark as favourite

Apcolite Advanced Emulsion Paint

Get Latest Price
Advanced stain guard- 2 times film strength- Burnish resistant royale shade cardChoose from over 1750 special shades of Royale Atmos Luxury Emulsion in our Royale Shade Card.colour consultancy onlineTry our free Colour Consultancy Onlien service for expert colour advice and visualised output of your home. faqswhat is the coverage area of this product?Apcolite Advanced Heavy Emulsion provides
Contact SellerAsk for best deal
Get Latest PriceRequest a quote
Share via

Jai Ganesh Hardware,Bilalguda

Jillelaguda, Hyderabad, Telangana
View Mobile Number
Call 09985581806
Verified Supplier
Wholesaler
Ask for more details from the seller
Contact Seller

Product Details

Product Description

- Advanced stain guard

- 2 times film strength

- Burnish resistant

 

 

royale shade card

Choose from over 1750 special shades of Royale Atmos Luxury Emulsion in our Royale Shade Card.

colour consultancy online

Try our free Colour Consultancy Onlien service for expert colour advice and visualised output of your home.

 

faqswhat is the coverage area of this product?

Apcolite Advanced Heavy Emulsion provides a coverage of 260 - 300 square feet per litre for 1 coat and 140 - 160 square feet per litre for 2 coats on a normal masonry surface after brushing.

 

what is the painting procedure for this product?

1) Sand the surface with Emery Paper 180 and wipe it clean.

2) Apply a coat of the Asian Paints Decoprime wall primer (Water Thinnable or Solvent Thinnable) and allow the primer to dry for 6 - 8 hours.

3) Smoothen the surface by filling dents and cracks with a coat of Asian Paints Acrylic Wall Putty and allow it to dry for 4 - 6 hours.

4) Again, sand the surface with Emery Paper 180 and wipe it clean.

5) Apply a coat of Asian Paints Decoprime wall primer (Water Thinnable or Solvent Thinnable) and allow the primer to dry for 6 - 8 hours.

6) Sand the surface with Emery Paper 320 and wipe it clean.

7) Apply the first coat of Apcolite Advanced Emulsion and allow it to dry for 4 - 6 hours. Dilute it with water. If you are using a brush, the dilution ratio is 40 - 50% for 1 litre of paint. If you are using a spray, the dilution ratio is 60 - 65% for 1 litre paint.

8) Apply the second coat of Apcolite Advanced Emulsion and allow it to dry for 4 - 6 hours. Dilute it with water. If you are using a brush, the dilution ratio is 40 - 50% for 1 litre of paint. If you are using a spray, the dilution ratio is 60 - 65% for 1 litre paint.


what is the dilution ratio for the primer?

If you are using the Asian Paints Decoprime Wall Primer (Solvent Thinnable) with a brush, you need to mix 8 - 10% of Mineral Turpentine Oil in 1 litre of Primer and if you are using a spray, mix 15 - 20% of Mineral Turpentine Oil in 1 litre of Primer. When using Asian Paints Decoprime Wall Primer (Water Thinnable), you need to mix 80 - 100% water in 1 litre of Primer.

 

what are the quantity variants available for apcolite advanced heavy emulsion?

Apcolite Advanced Heavy Emulsion is available in packs or tins of 1 litre, 4 litres, 10 litres and 20 litres.

 

what are the colour tools available for this product?

1) Colour Spectra Deck

2) Interior Colour Combinations Guide

3) Apcolite Emulsion range Shade Card


what are the painting pre-requisites for apcolite advanced heavy emulsion?

Surfaces should be free from any loose paint, dust or grease before applying Apcolite Premium Emulsion. Growth of fungus, algae or moss should be removed by wire brushing and water.

In case of areas having excessive dampness, please use Asian Paints Damp Block to limit further dampness. When the underlying surface exhibits chalkiness, in spite of thorough surface cleaning, use Asian Paints Exterior Sealer.

For filling up cracks that are as deep as 3 mm. you can use Asian Paints Crack Seal. In case of dents and holes, use Asian Paints Wall Putty or a mix of White cement and fine sand in the ratio of 1:3. In case of dents and holes upto 6mm, use Asian Paints TruCare Super putty to level the surface

For interior surfaces or substrates that are subjected to continuous seepage or dampness, use Asian Paints Smart Care Damp Block before the top coat application.

Also, new masonry surfaces must be allowed to cure completely. It is recommended to allow 28 days as the curing time for such surfaces.


Product Image

Apcolite Advanced Emulsion Paint

Company Details


About the Company

Legal Status of FirmSole Proprietorship (Individual)
Nature of BusinessWholesaler
IndiaMART Member SinceJul 2017
Tell Us What Are You Looking For?
I agree to the terms and privacy policy
Tell us what you
need
Receive seller
details
Seal the deal
Save time! Get Best Deal
I agree to the terms and privacy policy



X
I agree to the terms and privacy policy
X
Tell us your requirement to Get Best Price
Hi
I agree to the terms and privacy policy
Get Best Price
Hi
I agree to the terms and privacy policy

Have a requirement?
Get Best Price1