Since building construction activity has gained enormous uplift, it is known fact that the whole construction activity has been commercialized. Repercussion of which are drasting and uncontrollable One of these is “LEAKAGE” - infect it is a LEAK- AGE. To overcome leakage problems, many conventional methods are prevailing in the market, but these treatments have not proved to be result oriented due to which waterproofing still remains a “Pressing” problem.
In general, ready mixed primer are loaded with 50% Powders, sealing only the porosity of Side walls of Concrete resulting leakages. We, therefore, introduce
“ACSILS- CCS” an copolymer solution produces hard, yet flexible film.
Its film is non-yellowing and has excellent resistance to water and alkalis
Good hiding of final paint due to non porosity.
Can be applied with ordinary painting brush.
It is chemically cures at 300C, no additional curing method is required.Being Waterbased , it can be applied on Damp surfaces.
Thermoplastic copolymer solution
White low-viscous solution
100: 30 parts by water
60-80 sq.ft / coat.
Single in major case, may very to LEAKAGE
Off white Matt Finish
Newly dry concrete, Cementious paint applied
ACSILS –CCS . is ideally suitable for the initial coat of newly constructed plastered wall to opt the results of Waterproofing Heat Insulator both over concrete as well Asbestos Sheet
HEAT INSULATORS TO EXTERIOR ROOFS / WALLS as well to PLASTIC TANKS
PACKING / STORAGE:
50 kgs, 30 kgs 20 kgs. Plastic Carboys
Material should be stored in an enclosed area and away from direct sunlight and heat.
DISCLAIMER:Above information is based on the results gained from our knowledge, experience and test. However, no guarantee is implied as the conditions of actual uses by individuals for particular purpose are beyond our control. Our sole liability is limited up to replacing our product, if found defective. We disclaim any liability towards any cost of other raw material / process cost what so ever.
Shri D.G. Trivedi and Shri B.S. Shah, two partners established DIBHA PAINTS in 1986 with the manufacturing activities of Synthetic Enamel Paints and Water Based Epoxy Resins. We had marketed the products within the VAPI to start with, later the second products Water Based Epoxy Resin was introduced for the coatings to the surface of dome of BIO-GAS Plants.
We are pleased to inform that since over last decade, we are serving the nation by supplying our product “ DIBHAPOXY-225” to the Semi-government & Voluntary organizations , engrossed with the construction & repairs of Bio-gas plants. We with trust that the Non-conventional BIOGAS can be PRESERVED, which can reduce the pressure on forest and improve life-style of Rural Folk in country.
EPOXY BASED COATING:
Bio-gas plants coating
Walls & Floors coating
ACRYLIC COATING & BINDERS
Cementitious Mix Coating
M.S Concrete wood Coating
Cement Curing & Retarder