True Sense Smoke Sensor (Smoke detector) is a Photoelectric Sensor which initiates at the break of a smoke, caused due to fire, smouldering smokes or overheating. When the chamber is filled with a certain density of smoke, it immediately raises an alarm to Alert, which helps to take necessary action regarding the Fire Break. Uses of Smoke Sensor are suitable for Homes, Offices, Hospitals, Hotels, etc.
1. Sound & Flash Alarm, Loud 85dB alarm signal
2. DC 9V battery operated Smoke Detector
3. Photoelectric Sensor, detecting from all directions
4. Low battery warning
5. Test button for easy recommended monthly testing
6. Ceiling or wall mounting
7. Suitable for any rooms
8. Flash alarm indicator (Red LED)
9. Item Dimension : 11 cm x 2.5 cm
10. DIY (Do-It-Yourself) Product, It Can be installed by referring the User Manuals
11. Easy maintenance
12. Battery Operated , Auto Reset Feature
Technical Features :
1. Battery-DC 12V (Network type)
2. Static Current: less than 10 uA
3. Alarm Current: less than 20 uA
4. Sound Level: Upto 85dB alarm signal.
5. Operating Temp: -10 ~ +50 Deg C
6. Operating Humidity :less than 95% RH
7. Detecting Area: 20 Sq. Mtr
8. Item Size : 11 X 4.5 CM
9. Item Weight : 140 (INCLUDING BATTERY)
10. Operating Volt: 9 Volt
• Parking Area
1. Taking the battery into battery box before installation.
2. Connect DC 12V power, red wire for anode, black for cathode
3. Connect the power; the detector comes into operating state. Indicating LED flashes once per 40 seconds, once per 1 second at alarm state.
4. Select proper place (normally mounted on the centre of the ceiling), fix the mounting base, then put the detector into the base and turn it.
5. After installation, press the test button to test the output of the detector. LED should flash once per second. The detector should give out sound (independence type).
6. You can press the test button to the detector or blow a little of smoke into the detector to test if it work properly. The detector will recover to normal working state when the smoke disperses.
7. You can use a burning incense and place it nearby the smoke detector and hold for 2 minutes, smoke alarm will start the alarm and after testing, place the smoke detector in a fresh air for 4-5 minutes, it will automatically stop the sound
Packing List :
1 X Smoke Sensor/Detector
1 X Wall/Ceiling Plate
1 X 9V DC Fire Alarm Battery
2 X Screws
1 X User Manual 1 X Bill
Product Details :
Item Weight : 140 Gram
Product Dimensions : 11 x 4 C.M
Color : White
Primary Material : Plastic