Fluorescent Stainless Steel Biosafety Cabinet Class 2 Type B2, For Laboratory

Specifications
Biosafety Cabinets are specialized workstations widely used in clinical, pharmaceutical, life science and industrial laboratories where experiments need highly contaminant free environment. Also known as biological safety cabinets and biohazard safety cabinets, these are made in three different class types such as Class 1, Class 2 and Class 3; in which Class 2 is widely sed in microbiology laboratories because it provides protection to both product as well as personal. It is biosafety level factor which decides which BSC should be used in laboratory. These cabinets are considered safer than other clean benches because such BSCs effectively eliminate risks to operator / staff, samples and the environment from pathogenic biological agents (PBA) and microorganisms responsible for spreading airborne infection.
Types
We offer three types of class 2 biosafety cabinets are made. It is the type of work which decides which class 2 BSC should be used in laboratory. Below is short description about all types we offer: Type A2: recirculate approximately 70% air and 30% exhaustType B1: recirculate approximately 30% air and 70% exhaust Type B2: Does not recirculate but exhaust 100% air
Air Circulation of Class II B2
In order to minimize spread of airborne bacterial and viral organisms, the use of filter is crucial; therefore, we use 99.95% efficiency HEPA filters for particle size 0.3 microns in our biological class 2 type B2 safety cabinets. These air filters are of ISO 5 / Class 100 quality. Inflow velocity remains approx. 105 fpm (0.5 m/sec) with 100% air exhaust through separate exhaust mechanism. Standard Accessories Our Biosafety cabinets are fitted with fluorescent lights outside working zone. UV lamps are fitted inside working zone in such a way that the operator cannot see them directly. Microprocessor controlled mechanism allows UV on only when door is closed. Auto sensors facilitate to run blower after opening of door only. User can set warm time as per convenience which in turn will tun on the FL light only after set time and door open controlled by microprocessor. Electrical sockets are fitted to run any instrument under the working area; in addition, service fixtures for air, gas.