Home > Plastic, PVC & PP Products > Polyurethane Foam Spray
Boss 334 PU Foam Spray Sealant
mark as favourite

Boss 334 PU Foam Spray Sealant

Rs 330/Number Get Latest Price
Density 1.56 lbs./ft3
Elongation 20%
Tensile Strength 15 psi
Fully Cured 12 hours (68deg F & 65% RH) (1inch bead)
Tack Free Time 8 minutes (68deg F & 65% RH) (1inch bead)
Application Temperature 40deg F to 115deg F
Thermal Conductivity 0.22 - 0.26 Btu-in/hr-F-ft2
DESCRIPTION
BOSS® 334 Window & Door Minimal Expanding Gun Foam is a one-component, ready to use polyurethane foam, formulated to seal the gap around window and door frame and the rough opening. BOSS® 334 expands to generate an effective seal, and when used properly is proven not to distort or bow window and door frames. BOSS® 334 will achieve a Sound...
View ContactCall Seller Now
Call 08043049955Send a quick message
Get Best PriceRequest a quote
Share via

Anagha Engineers

Navi Mumbai, Maharashtra
Star Supplier
TrustSEAL Verified
Manufacturer
78% Response Rate

Product Details

Product Specification

Density 1.56 lbs./ft3
Elongation 20%
Tensile Strength 15 psi
Fully Cured 12 hours (68deg F & 65% RH) (1inch bead)
Tack Free Time 8 minutes (68deg F & 65% RH) (1inch bead)
Application Temperature 40deg F to 115deg F
Thermal Conductivity 0.22 - 0.26 Btu-in/hr-F-ft2
R Value 3.8 - 4.8 per inch
Cuttable 1 hour (68deg F & 65% RH) (1inch bead)
Shear Strength 7 psi
VOC 166 gr./liter
Service Temperature -40deg F to 200deg F
Minimum Order Quantity 12 Number

Product Description

DESCRIPTION
BOSS® 334 Window & Door Minimal Expanding Gun Foam is a one-component, ready to use polyurethane foam, formulated to seal the gap around window and door frame and the rough opening. BOSS® 334 expands to generate an effective seal, and when used properly is proven not to distort or bow window and door frames. BOSS® 334 will achieve a Sound Transmission Class (STC) of 58 when applying it in accordance with ASTM C-919 “Standard Practice for use of Sealants in Acoustical Applications”.

FEATURES:
  • AAMA 812-04 approved
  • CFC propellant free
  • Excellent adhesion on most substrates (except Teflon,PE and PP)
  • High thermal and acoustical insulation
  • Very good filling capacities
  • Excellent mounting capacities
  • Excellent stability (no shrink or post expansion)
  • Very precise application due to the foam gun system
  • Low pressure build, reducing the chance of bowing
  • VOC Compliant

USES:

  • Installing of window and door frames
  • Filling of cavities
  • Sealing of all openings in roof constructions
  • Creation of a soundproof screen
  • Mounting and sealing of window and door frames
  • Connecting of insulation materials and roof constructions
  • Application of a soundproofing layer on motors
  • Improving thermical isolation in cooling systems
HOW TO USE
BOSS® 334 may be applied to all substrates except PE and PP. Apply to surfaces that are clean and free of dust and grease. Moistening of the surfaces improves adhesion, curing and denser cellular structure. Shake can well before use, attach foam gun and adjust screw. For best results, use in temperatures between 60°F and 100°F and at relative humidity of 40%. Clean with BOSS® 335 Gun and Foam Cleaner before curing.

DANGER!
EXTREMELY FLAMMABLE. CONTENTS UNDER PRESSURE. Turn off all pilot lights, electrical igniters, burners and other sources of ignition or heat during use. Do not smoke, use matches or lighters while dispensing foam. Do not expose to direct sunlight, high heat or store in enclosed vehicle. Avoid breathing vapor/spray. Use in adequately ventilated areas with appropriate breathing apparatus. Avoid contact with skin and eyes. Wearing eyewear and gloves is recommended. Do not incinerate or puncture can. Store at temperatures below 120°F. KEEP OUT OF REACH OF CHILDREN. For safe handling information on this product, consult the Safety Data Sheet (SDS).FIRST AID: In case of eye contact, flush immediately with water for 15 minutes and get medical help. If inhalation causes physical discomfort, move to fresh air. If discomfort persists or any breathing difficulty occurs, get medical help. If swallowed, drink large quantities of water. DO NOT induce vomiting. GET PHYSICIAN ASSISTANCE IN ALL CASES. Cured foam is not harmful to health.

CONTAINS
Polymethylenepolyphenylisocyanate, Dimethylether, Isobutane and Propane

SHIPPING LIMITATIONS
Ground shipments only. Cannot ship by air.Reactive VOC 166 g/l (17% wt)

CLEAN UP
Uncured sealant can be easily removed using BOSS® 335 or a solvent such as alcohol or acetone. For an environmental and health friendlier choice use BOSS® Biggie Wipes. If the sealant is cured it must be removed mechanically by cutting and scraping.

STORAGE AND SHELF LIFE
When stored upright in a dry environment at or below 70°F (21°C), BOSS® 334has a shelf life of 12 months from date of shipment. In Countries where high heat and humidity are a factor, special precautions must be taken. Store product in a covered, well-ventilated warehouse and avoid excessive heat conditions.torage in high heat, high humidity conditions may reduce shelf life by up to 30%.

Product Image

Boss 334 PU Foam Spray Sealant

Company Details


About us

Year of Establishment2014
Legal Status of FirmSole Proprietorship (Individual)
Nature of BusinessManufacturer
Number of EmployeesUpto 10 People
Annual TurnoverRs. 1 - 2 Crore
IndiaMART Member SinceFeb 2015

OBJECTIVE : To provide users with innovative solutions at lowest cost . Enable online purchase , Doorstep delivery using Technology and state of the art Supply Chain Management.

Mission :

Paradigm shift to improve Existing processes through Innovation, Superior Technical & Customer services, Quality and Commitment.

Vision :

To be the most preferred partner for the Customer in our Operating segment .


Anagha Engineers is professionally managed and has been promoted by Mr. Bibhas Agarwal having 20+ years of work experience in Production, Technical services, Operations, Sales and Profit centre head- having worked with reputed MNCs like Loctite, ICI, Henkel, Pidilite.

WHY Anagha Engineers ?

· Lowest cost solution provider - Eg: Silicone Sealants, PU sealants – Best quality @ lowest price .

· Trusted technical partnership – understand requirement and provide long term solutions

PU foam Spray : approved and used by reputed developers like Lodha, Kalpataru, Satra Buildon

Steelguard ( anti rust primer) : approved by IIT, Power Grid, BEML, Mahindra

· Effective Supply chain management- On time delivery

· Material Availability

Customers Include :

Blue Star Ltd , Frigo Allana, Godfrey Philips India, Kellogg, Savita Oil, Owens Corning, Electrotherm, Govind Milk , Star Coolers, Johnson Matthey, Forbo Seigling, Huntsman International

IPCA, Indoco Remedies, Zydus Takeda

Kalpataru , Lodha Developers, Mahindra Lifespaces, Satra Buildcon, Modscon ,North Constructions

Anagha Engineers specializes in :

- Pu foam Sealants , Expandable PU foam , PU foam Spray, FR Pu foam Sealant, Gap filling foam

- PU sealants for Construction, Industrial and automotive applications

- Silicone Sealants : GP, Weather Silicone, Neutral Silicone, High temperature Silicone etc

- MS Sealants , Hybrid sealants

- Polysulphides, Acrylic sealants

- Waterproofing

- Anti rust chemicals

- Specialty Tapes

Tell Us What Are You Looking For?
I agree to the terms and privacy policy
Tell us what you
need
Receive seller
details
Seal the deal
Save time! Get Best Deal
I agree to the terms and privacy policy



Browse related categories


Find more suppliers in Mumbai

Foam Sealants in Mumbai
Pu Foam in Navi Mumbai

How it Works
Tell us what you need by filling in the form
Receive Verified supplier details
Compare Quotations and seal the deal
X
I agree to the terms and privacy policy