Aluminium C 200 Calorimeter, For Industrial
Usage/Application | Industrial |
Material | Aluminium |
Weight | 20 kg |
Country of Origin | Made in India |
Measuring cell C 200
Decomposition vessel C 5010
Oxygen filling station C 248
Consumables for calibrations and installation
Space-saving and low cost combustion calorimeter for determing gross calorific values of liquid and solid samples.
Validation according to DIN 51900, ISO 1928, ASTM D240, ASTM D4809, ASTM D5865, ASTM D1989, ASTM D5468, ASTM E711.
Suitable for teaching and training, as well (f.e tecnical- schools, universities) and for industriell laboratories with less analyses..
Manual handling for water and oxygen filling.
Four different working methods, isoperibolic, dynamic, manual, time controlled makes possible an ideal adjustment of different operating tasks.
Clear and easily explained display which is simply to use .
With an external power pack, “world tension useable from 100 – 240 V AC, 50/60 Hz. The operating voltage of the calorimeter is 24 V DC low- voltage.
Friendly in aftersales
Manual ( teaching mode): ignition and end of the measurement will be done by the operator himself; the temperature increase will be indicated at the display each minute.
All calculations have to be done manually.
At the other three modes ignition and calculation of the gross calorific value will be done automatically.
The gross calorific value will be shown on the display. Acid corrections and calculations of the net calorific value have to be done manually. The modes have different measuring times: Isoperibolic: approx: 17 min.
Dynamic : approx. 8 min
Manual : approx. 17 min
(depend on the operator)
Time controlled : 14 min The decomposition vessel can be equiped in to use an combustible crucibles C 14 (accessory C 5010.4 attachment is necessary)User-friendly software C 5040 Calwin for controlling the calorimeter and administration of measuring data (accessory). Transfer of the datas to Excel or Word are possible Up to eight IKA measuring cells can be controlled by a single PC, using a multiserial plug in card PCI 8.2 (accessory)Technical Data:Measuring range max. 40000 JMeasuring mode dynamic 25°C yesMeasuring mode isoperibol 25°C yesMeasuring time dynamic approx. 8 minMeasuring time isoperibol approx. 17 minReproducibility dynamic (1g benzoic acid NBS39i) 0.1 %RSDReproducibility isoperibol (1g benzoic acid NBS39i) 0.1 %RSDWorking temperature max. 25 °CTemperature measurement resolution 0.0001 KInterface printer CentronixInterface PC RS232Oxygen filling noDegasification noDecomposition detection noDecomposition vessel C 5010 yesDimensions (W x H x D) 400 x 400 x 400 mmWeight 21 kgPermissible ambient temperature 20 – 25 °CPermissible relative humidity 80 %Protection class according to DIN EN 60529 IP 20RS 232 interface yesVoltage 100 – 240 VFrequency 50/60 HzPower input 120 W
Product Details
Company Details
Product Specification
Usage/Application | Industrial |
Material | Aluminium |
Weight | 20 kg |
Country of Origin | Made in India |
Product Description
C 200-System consists of the following components:
Measuring cell C 200
Decomposition vessel C 5010
Oxygen filling station C 248
Consumables for calibrations and installation
Space-saving and low cost combustion calorimeter for determing gross calorific values of liquid and solid samples.
Validation according to DIN 51900,ISO 1928, ASTM D240, ASTM D4809, ASTM D5865, ASTM D1989, ASTM D5468, ASTM E711.
Suitable for teaching and training, as well (f.e tecnical- schools, universities) and for industriell laboratories with less analyses..
Manual handling for water and oxygen filling.
Four different working methods, isoperibolic, dynamic, manual, time controlled makes possible an ideal adjustment of different operating tasks.
Clear and easily explained display which is simply to use .
With an external power pack, "world tension useable" from 100 – 240 V AC, 50/60 Hz. The operating voltage of the calorimeter is 24 V DC low- voltage.
Friendly in aftersales
Manual ( teaching mode): ignition and end of the measurement will be done by the operator himself; the temperature increase will be indicated at the display each minute.
All calculations have to be done manually.
At the other three modes ignition and calculation of the gross calorific value will be done automatically.
The gross calorific value will be shown on the display. Acid corrections and calculations of the net calorific value have to be done manually.
The modes have different measuring times:
Isoperibolic: approx: 17 min.
Dynamic : approx. 8 min
Manual : approx. 17 min
(depend on the operator)
Time controlled : 14 min
The decomposition vessel can be equiped in to use an combustible crucibles C 14 (accessory C 5010.4 attachment is necessary)
User-friendly software C 5040 Calwin for controlling the calorimeter and administration of measuring data (accessory). Transfer of the datas to Excel or Word are possible Up to eight IKA measuring cells can be controlled by a single PC, using a multiserial plug in card PCI 8.2 (accessory)
Technical Data:
Measuring range max. 40000 J
Measuring mode dynamic 25°C yes
Measuring mode isoperibol 25°C yes
Measuring time dynamic approx. 8 min
Measuring time isoperibol approx. 17 min
Reproducibility dynamic (1g benzoic acid NBS39i) 0.1 %RSD
Reproducibility isoperibol (1g benzoic acid NBS39i) 0.1 %RSD
Working temperature max. 25 °C
Temperature measurement resolution 0.0001 K
Interface printer Centronix
Interface PC RS232
Oxygen filling no
Degasification no
Decomposition detection no
Decomposition vessel C 5010 yes
Dimensions (W x H x D) 400 x 400 x 400 mm
Weight 21 kg
Permissible ambient temperature 20 – 25 °C
Permissible relative humidity 80 %
Protection class according to DIN EN 60529 IP 20
RS 232 interface yes
Voltage 100 – 240 V
Frequency 50/60 Hz
Power input 120 W
About the Company
Incorporated in the year of 1984, Raut Scientific & General Traders has been able to acclaim a very rich and eminent name in the industry of Manufacturer, Exporter, and Trader of a first class assortment of industrial utilities. Our offered products are high in adherence with the international standards and norms which help us in winning the huge convenience and fervency of our company. Moreover it is being ensured that stringent tests are being carried out over the quality of these products before any kind of shipment is being processed towards the customers end. Some of the best and highly durable range of products which we have been able to provide with include those of RCT Basic, Lab Plasticware, Rotary Evaporator, Brookfield Viscometer, Magnetic Stirring Bar and many more. We are also offering Lab Equipment's Repair Service to our Client.
Seller Contact Details
Cts 3455 To 62, Flat No. 4, S No. 80, Anupam Nagari, Bopodi B P Road, Pune - 411003, Maharashtra, India
Get Directions