Cast Iron Straight Edges, For Industrial

₹ 5,000Get Latest Price
Usage/Application
Industrial
Brand
Micro Flat
Min Overall Depth
75 mm
Min Flange Thickness
8 mm
Min Width Of Working Face
25 mm
Cast Iron Straight Edges are widely used for setting up and leveling machinery and for checking and spotting bearing surfaces during hand scrapping operations. Properly supported, they may be used with various indicating devices to check surface flatness of large Machined areas like Surface Tables, Machine Tables & Beds, Machine guide ways, etc.
Salient
Feature:
- Offered in two types viz. Bow shaped or Camel Back type and I-Section or Parallel type, made generally as per IS-5268- 1991.
- Bow shaped Straight Edges are provided with pads on their bow for supporting Engineer's Level.
* Made from close grained Cast Iron Castings conforming to Grade FG-220 of IS-210. Casting duly stress relieved.
* Offered in hand-scrapped finish to various Grades.
* High spots uniformly distributed. Proportion of bearing area of the working surface not less than 20% for Grade-0 and Grade-1 and not less than 10% for Grade- 2 accuracy Straight Edges.
* Flatness of side faces: Any 300 mm length flat within 25 microns for Grade-0, Grade-1 and within 50 microns for Grade-2.
* Squareness of working surfaces and side faces when checked with side face laid on Grade-1 Surface Plate:
For Grades-0 and 1 : Within 8 microns per 25 mm
For Grade-2: Within 15 microns per 25 mm
* Parallelism of side faces:
For Grades-0 and 1: Not exceeding 30 microns per 300 mm and 60 microns over total length.
For Grade-2 : Not exceeding 60 microns per 300 mm and 120 microns over any total length.
* Supplied with rexine cover for protection of working surfaces.
* Actual dimensions of Straight Edges may be more than those stated in the Tables.
* Length of Edge: 300 to 5000 mm
* Min Overall Depth: 75 to 350 mm
* Min Width Of Working Face:25 to 65 mm
View Complete Details
Get Latest PriceRequest a quote

Micro Flat Datums Pvt Limited

GIDC, Anand, Gujarat
4.5/5 
★★★★★
★★★★★
 (14)
GST24AABCM6713E1ZV
TrustSEAL Verified
Star Supplier
Manufacturer
 View Mobile Number 
71% Response Rate
Contact Supplier

Product Details

Company Details

Product Specification

Usage/ApplicationIndustrial
BrandMicro Flat
Min Overall Depth75 mm
Min Flange Thickness8 mm
Min Width Of Working Face25 mm
Length of Edge300 mm
MaterialCast Iron
Surface FinishHand Scraped Finish

Product Description

Cast Iron Straight Edges are widely used for setting up and leveling machinery and for checking and spotting bearing surfaces during hand scrapping operations. Properly supported, they may be used with various indicating devices to check surface flatness of large Machined areas like Surface Tables, Machine Tables & Beds, Machine guide ways, etc.


Salient Feature:
  • Offered in two types viz. Bow shaped or Camel Back type and I-Section or Parallel type, made generally as per IS-5268- 1991.
  • Bow shaped Straight Edges are provided with pads on their bow for supporting Engineer's Level.
  • Made from close grained Cast Iron Castings conforming to Grade FG-220 of IS-210. Casting duly stress relieved.
  • Offered in hand-scrapped finish to various Grades.
  • High spots uniformly distributed. Proportion of bearing area of the working surface not less than 20% for Grade-0 and Grade-1 and not less than 10% for Grade- 2 accuracy Straight Edges.
  • Flatness of side faces: Any 300 mm length flat within 25 microns for Grade-0, Grade-1 and within 50 microns for Grade-2.
  • Squareness of working surfaces and side faces when checked with side face laid on Grade-1 Surface Plate:
    For Grades-0 and 1 : Within 8 microns per 25 mm
    For Grade-2: Within 15 microns per 25 mm
  • Parallelism of side faces:
    For Grades-0 and 1: Not exceeding 30 microns per 300 mm and 60 microns over total length.
    For Grade-2 : Not exceeding 60 microns per 300 mm and 120 microns over any total length.
  • Supplied with rexine cover for protection of working surfaces.
  • Actual dimensions of Straight Edges may be more than those stated in the Tables.
  • Length of Edge: 300 to 5000 mm
  • Min Overall Depth: 75 to 350 mm
  • Min Width Of Working Face:25 to 65 mm

Interested in this product?Get Latest Price from the seller
Contact Seller

About the Company

Year of Establishment1979
Legal Status of FirmLimited Company (Ltd./Pvt.Ltd.)
Nature of BusinessManufacturer
Number of Employees51 To 100 People
Annual TurnoverRs. 10 - 25 Crore
IndiaMART Member SinceJan 2011
GST24AABCM6713E1ZV
Import Export Code (IEC)08880*****

For over 30 years, Micro-flat Datums Private Limited has been in the forefront of manufacturing of Straight Edges, Bench Centers, etc. Since inception in 1979 we have led the industry by offering most comprehensive range of products and Instrument Calibration Services.
We are fortunate to have the ongoing patronage of our valued customers and that we could live up to their expectations and faith reposed on our endeavours. Every member of the winning team at MICROFLAT continues to strive for improved levels of product quality, reliability and customer satisfaction, whilst our ability to provide innovative low cost customized solutions is paramount in things we do.
Under the visionary leadership of the mentors, Late Mr. Udayan Patel, we have been able to set new benchmarks for our competitors. We have been backed by the experience and endeavours of three generations in the field of engineering having winning combination of Traditional Skills, Team Spirit, Advanced Technology in design, manufacturing, quality control and calibration facility in perfect harmony and all under one roof.

Cast Iron Straight Edges, For Industrial
Cast Iron Straight Edges, For Industrial
termsprivacy policy

Seller Contact Details

Rohan Patel

Plot No. 25-28, Zone D-3, Phase Iv, G. I. D. C., GIDC Anand - 388121, Gujarat, India

Get Directions
View Mobile No.
Send SMS
Send Email