Dendrite Yampoxy

Get Latest Price

Features: Resin ( Epoxy Base ), Hardener ( Polyamide Base )
Apperance: Resin (Translucent ), Hardener ( Yellowish brown liquid)
Viscosity: Resin ( 17000±2000 cps at 30oC ), Hardener ( 20000±2000 cps at 30oC )
Characteristics:
Two component epoxy adhesive used for joining substrates like metal, stone, glass, ceramics, wood etc. where rigid joints are required. Pretreatment of Surface:

The surface to be bonded should be free from dirt, oil and grease. The metal surface should be sand blasted or abraded. Rubber can be dipped in concentrated sulphuric acid for 5 minutes followed by washing with water and subsequently complete drying.Method of Application:Mix the two components i.e. epoxy resin and hardener in the ratio 1:1 (by volume) or 1:0.8 (by weight). The mixed adhesive can be applied on the surfaces by a spatula. After application of the adhesive the substrates to be bonded, are to be positioned and clamped. Final strenght will be achieved after 24 hrs.Caution:Replace lid immediately after partial use. Store in a cool and dry place. Epoxy Resin mixed with Hardener has limited pot life. To avoid wastage, mix only the amount required.Packing: 13, 36, 180 gm and 1.8 kg.Special Instruction:Shake the container before use.

View Complete Details
Get Latest PriceRequest a quote
Verified Supplier
Wholesale Trader
 View Mobile Number 
Contact Supplier

Product Details

Company Details

Product Description

Features:  Resin ( Epoxy Base ), Hardener ( Polyamide Base )
Apperance: Resin (Translucent ), Hardener ( Yellowish brown liquid)
Viscosity:  Resin ( 17000±2000 cps at 30oC ), Hardener ( 20000±2000 cps at 30oC )

Characteristics:
Two component epoxy adhesive used for joining substrates like metal, stone, glass, ceramics, wood etc. where rigid joints are required.

Pretreatment of Surface:

The surface to be bonded should be free from dirt, oil and grease. The metal surface should be sand blasted or abraded. Rubber can be dipped in concentrated sulphuric acid for 5 minutes followed by washing with water and subsequently complete drying.

Method of Application:

Mix the two components i.e. epoxy resin and hardener in the ratio 1:1 (by volume) or 1:0.8 (by weight). The mixed adhesive can be applied on the surfaces by a spatula. After application of the adhesive the substrates to be bonded, are to be positioned and clamped. Final strenght will be achieved after 24 hrs.

Caution:

Replace lid immediately after partial use. Store in a cool and dry place. Epoxy Resin mixed with Hardener has limited pot life. To avoid wastage, mix only the  amount required.

Packing: 13, 36, 180 gm and 1.8 kg.

Special Instruction:

Shake the container before use.


Interested in this product?Get Latest Price from the seller
Contact Seller

About the Company

Nature of BusinessWholesale Trader
IndiaMART Member SinceSept 2011
Dendrite Yampoxy
Dendrite Yampoxy
termsprivacy policy

Seller Contact Details

Gaurav Aggarwal

249-b, Gali No. 2, Ravi Nagar, Basai Road, Gurgaon - 122001, Haryana, India

Get Directions
View Mobile No.
Send SMS
Send Email