Dr Fixit 112 Pidifin 2k Waterproof Coating, Packaging Size: 90 Kg

Acrylic Cementitious Waterproof Coating
- 80% Film Elongation
- Upto 1mm Film Thickness
* Excellent Resistance to Water Ingress
* Excellent Adhesion to concrete & Masonry
Description:
Dr. Fixit 112 Pidifin 2K is a acrylic cementitious, polymer modified elastomeric, waterproofing & protective coating composed of best quality Portland cement, properly selected & graded aggregates, additives & acrylic emulsion polymer as a binder. It is applied to waterproof and protect concrete and masonry substrates.
Features & Benefits:* Elastomeric: Elastomeric flexible coating that accommodate cracks up to 2 mm with an elasticity of 40-50%
* Low water permeability: Excellent resistance to ingress of water
* Adhesion: Excellent adhesion to concrete and masonry surfaces
* Eco-friendly: Non-toxic with low VOC content
* CFTRI certified: As a “potable water safe coating for waterproofing for water tanks
Areas of Application:* Dr. Fixit 112 Pidifin 2K must be applied to new or old concrete substrates that are structurally sound.
* Excellent as a waterproof coating for bathrooms, kitchen sinks, balconies, etc.
* Ideal as a coating for waterproofing of chhajjas, canopies, etc.
* As waterproof coating on internal sides of domestic water tanks.
* Good for waterproofing of sloped roofs.
* As a waterproof coating for terraces of areas up to 100-150 m2
Method of Application:Surface Preparation:* The surface of application must be thoroughly prepared by mechanical means, to remove all loose particles, laitance, etc.
* Oil and grease, if any, must be de-greased with suitable solvents. It then must be washed off with jet of water and brought to touch dry state. Any surface undulations, cracks and crevices must be duly filled or repaired with cement sand mortar mixed with latex polymers such as Dr. Fixit Pidicrete URP / Dr. Fixit Pidicrete MPB.
Mixing:* Shake the liquid component well to a homogenous milky colour.
* Use heavy duty slow speed mechanical mixer fitted with a suitable paddle for mixing the two components of the material.
* In a mixing vessel, slowly add the powder component in to the liquid under continuous stirring. Continue to stir thoroughly to achieve a lump free homogenous slurry.
Coverage:* Approximately 0.6 – 0.75 m2 / kg at 1 mm thickness in 2 coats, depending on the level of the substrate.
Precautions & Limitations:* Do not part mix. Mix the entire quantity of both the components at one go.
* Do not dilute.
* Always add powder to liquid to avoid lump formation.
* Do not cure by flooding with water.
* Cure the membrane with moist hessian cloths
* Do not conduct any ponding test before it is completely cured for 7 days
* Always protect the membrane with screed in areas exposed to foot and other traffic
Shelf Life & Storage:* Shelf life is 12 months from the date of manufacturing.
* Store in shed, protecting from direct sunlight and away from extreme temperature.
* In extremely hot temperature conditions, store in a temperature-controlled environment i.e. less than 300C.
Health & Safety Precautions:* Dr. Fixit Pidifin 2K is alkaline and should not come into contact with skin or eyes.
* Avoid inhalation of dust during mixing.
* Gloves, goggles and dust masks should be worn, during mixing and handling the product.
* Any contact to eyes should be washed immediately with clean water and seek medical advice