Dust Particulate Sampler APM 154
Frequency | Single Phase,50Hz AC |
Diameter | 47 mm |
Power Source | Electricity |
Display | Digital |
Automation | Automatic |
Features:
- PM10 and PM2.5 Impactors of sampler based on designs standardized by US EPA
- Two part cabinet ensures that temperature of PM 2.5 filter remains close to ambient temperature
* Lower sampling rate of 1m3/hr reduces filter choking even in areas having high FPM levels
* Critical Orifice maintains constant sampling rate of 1 m3/hour
* Sampler can run continuously 28 hrs monitoring
* Can be measured PM10 or PM2.5 at a time
* Calibration Certificate for each instrument shall be provided with instruments
* Compact and portable
* Weight: Approx 25 Kg
Owing to its modular design, APM 154 can be easily paired with a gaseous sampling attachment (for monitoring SO2, NOx, NH3, Ozone etc.) as gaseous sampling requires only a few LPM of air flow. This is possible through an attachable subsidiary unit LES 411. Kindly refer to respective brochures of LES 411· Size Selective inlets: Omni-directional air inlet with PM 10 separation through an impactor followed by PM 2.5 separation through a WINS Impactor· Flow Rate: Constant sampling rate of 1 m3/hr unaffected by voltage fluctuation and filter choking maintained by critical orifice system· Sampling Time Record: 0 to 9999.99 hrs. recorded on a Time Totalizer· Vacuum Pump: Diaphragm Pump· Power requirement: Nominal 220 V, Single Phase, 50Hz AC mains supply. For proper operation and safety, a good earth connection is mandatory· Automatic Sampling: 24 hrs programmable timer to automatically shut off the system after a pre-Control set time interval.· Sample Volume: Dry Gas meter records the total air volume sampled· Filter: Filter holder designed to accept any standard 47 mm diameter filter mediaWarranty: One year
Product Details
Company Details
Product Specification
Frequency | Single Phase,50Hz AC |
Diameter | 47 mm |
Power Source | Electricity |
Display | Digital |
Automation | Automatic |
Power requirement | Nominal 220 V |
Product Description
We have achieved widespread acclamation in manufacturing and supplying best quality Dust Particulate Sampler. These samplers have intensified use in keeping a keen eye on the level of air pollution causing particulates present in the ambient air. With the fabrication and design being made in accordance with current industrial guidelines, these samplers have the ability to produce accurate results for longer time span. Apart from this, we make the supply of our offered product in durable packaging at reasonable price tags.
Features:
- PM10 and PM2.5 Impactors of sampler based on designs standardized by US EPA
- Two part cabinet ensures that temperature of PM 2.5 filter remains close to ambient temperature
- Lower sampling rate of 1m3/hr reduces filter choking even in areas having high FPM levels
- Critical Orifice maintains constant sampling rate of 1 m3/hour
- Sampler can run continuously 28 hrs monitoring
- Can be measured PM10 or PM2.5 at a time
- Calibration Certificate for each instrument shall be provided with instruments
- Compact and portable
- Weight: Approx 25 Kg
Owing to its modular design, APM 154 can be easily paired with a gaseous sampling attachment (for monitoring SO2, NOx, NH3, Ozone etc.) as gaseous sampling requires only a few LPM of air flow. This is possible through an attachable subsidiary unit LES 411. Kindly refer to respective brochures of LES 411
· Size Selective inlets: Omni-directional air inlet with PM 10 separation through an impactor followed by PM 2.5 separation through a WINS Impactor
· Flow Rate: Constant sampling rate of 1 m3/hr unaffected by voltage fluctuation and filter choking maintained by critical orifice system
· Sampling Time Record: 0 to 9999.99 hrs. recorded on a Time Totalizer
· Vacuum Pump: Diaphragm Pump
· Power requirement: Nominal 220 V, Single Phase, 50Hz AC mains supply. For proper operation and safety, a good earth connection is mandatory
· Automatic Sampling: 24 hrs programmable timer to automatically shut off the system after a pre-Control set time interval.
· Sample Volume: Dry Gas meter records the total air volume sampled
· Filter: Filter holder designed to accept any standard 47 mm diameter filter media
Warranty: One yearAbout the Company
Setup in 2010, Lata Envirotech Services is the leading manufacturer and service provider of Air Pollution Monitoring Instruments in India.We are the preferred manufacturer of pm 2.5 sampler, Fine particulate sampler, Stack Sampler, Mini Sampler, Handy Sampler, Respirable Dust Sampler, Combined Sampler and Digital Velocity Monitor for all Pollution Control Boards, prominent research institutions, leading industrial houses and environment consultants for their air pollution monitoring needs. Our instruments are in use in all parts of the country - from Kashmir to Tamil Nadu and from Gujarat to the North-East states. Our product range includes Dust Samplers (PM 10 and PM 2.5), Gaseous Pollutant Samplers, In addition, through our tie-ups with leading international principals, EIPL can also supply continuous analyzers for ambient air monitoring as well as remote noise monitoring terminals.
A pan-India service and support network focus on timely calibration and regular customer training ensure trouble free and smooth operation of our instruments at all times. The offered products are fabricated using high-grade raw material and sophisticated technology in compliance with the international quality standards. Our complete product range is designed as per the set universal norms. These products are acknowledged among our customers for their innovative patterns, easy operation, low power consumption, robust construction and high dependability. Moreover, these products can also be availed by clients from us in various sizes, patterns, configurations and other related specifications as per the variegated needs of the clients.
Our infrastructure is constructed over a wide area that is empowered with requisite automated machines and the best technologies. This unit comprises various other sub-units like manufacturing, quality testing, R & D, sales and marketing, etc. The quality assured a range of products offered by us is manufactured in adherence with the universal standards. We regularly upgrade all the installed machines and introduce new technologies in the manufacturing process to enhance the production rate. Additionally, our massive production unit helps us in meeting the bulk & urgent orders of customers within the predetermined time schedule. Backed by a highly capable team of professionals, we are able to offer an excellent quality range of products. Profound domain knowledge and massive experience in the industry makes it easy for our professionals to completely understand the exact demands of clients. Different training sessions and learning programs organize on a regular basis that keeps our staff fully acquainted with various technological advancements of the industry. Our employees use their talent to design these products with improvised quality.
We offer our patrons high-quality product array that is fabricated using quality tested factor inputs. Raw materials used for the fabrication is procured from some of the leading vendors of the industry. With the support of our in-house quality testing lab, our entire product range is tested on different parameters to eradicate all the defects from the assortment. To keep ourselves updated with the latest technological advancements as well as to satisfy the ever-growing requirements of our esteemed clients, we have deployed an R & D units.
Under the guidance of our mentor, “Mr Horam Singh”, we have achieved the pinnacle of success. His foresighted vision, ethical business policies and vast industry experience has enabled us in creating a loyal clientele across the country
Seller Contact Details
K-307, Upsidc Industrial Area, Greater Noida - 201310, Gautam Buddha Nagar, Uttar Pradesh, India
Get Directions