Standard 0.37-15.5 kw Ring Blower Model
₹ 40,000/ PieceGet Latest Price
Power (W) | 0.37-15.5 kw |
Body Material | Aluminum |
Power | Standard |
Power Source | Electric Blower |
Pressure | High Pressure |
Ring Blower:
The Cleantek Ring blower is a non-positive displacement, high volume, low pressure blower that can operate as either a compressor or a vacuum pump. It is also known by other names such as: regenerative blower, Turbine Blower, vortex blower and side-channel blower.
The blower consists of an diecast impeller mounted directly on a motor shaft and is rotated at a high speed, about 2880 RPM. On the periphery of the impeller is a large number of radial blades. The impeller is positioned between two endplates with the blades located with a channel on either side.
As the diecast impeller rotate and the blades pass the inlet port, a low pressure area is created that draws in air or other gases. The impeller blades impart motion to the air by centrifugal force, throwing it outward and forward, where it follows the contour of the side-channel and is returned to the base, or root, of the impeller. This action is repeated many times, creating a vortex. Each "regeneration" causes the air to gain pressure until it reaches the portion of the housing where the air is stripped from the impeller and discharged from the blower.
Cleantek manufacturing air agitation blower for Electroplating process, Metal coating process, Aquaculture , Etc Various airflow capacity and pressure mranges avilablee in our blowers.
leantek Manufacturing turbine blower in various airflow and pressure capacity.
This Turbine blower available is 2 different designs.
1. Single stage Turbine Blower
2. Double Stage Ring Blower
Our Turbine Blower models available in 45 cmh to 1500 cmh airflow capacity.
Applications:
1. STP & ETP air supply
2. Any air agitation
3. Ballon & Gloves testing
4. Printing
5. Spa Air Supply
6. Methane Air supply etc...
The Cleantek Ring blower is a non-positive displacement, high volume, low pressure blower that can operate as either a compressor or a vacuum pump. It is also known by other names such as: regenerative blower, Turbine Blower, vortex blower and side-channel blower.
The blower consists of an diecast impeller mounted directly on a motor shaft and is rotated at a high speed, about 2880 RPM. On the periphery of the impeller is a large number of radial blades. The impeller is positioned between two endplates with the blades located with a channel on either side.
As the diecast impeller rotate and the blades pass the inlet port, a low pressure area is created that draws in air or other gases. The impeller blades impart motion to the air by centrifugal force, throwing it outward and forward, where it follows the contour of the side-channel and is returned to the base, or root, of the impeller. This action is repeated many times, creating a vortex. Each "regeneration" causes the air to gain pressure until it reaches the portion of the housing where the air is stripped from the impeller and discharged from the blower.
Cleantek manufacturing air agitation blower for Electroplating process, Metal coating process, Aquaculture , Etc Various airflow capacity and pressure mranges avilablee in our blowers.
leantek Manufacturing turbine blower in various airflow and pressure capacity.
This Turbine blower available is 2 different designs.
1. Single stage Turbine Blower
2. Double Stage Ring Blower
Our Turbine Blower models available in 45 cmh to 1500 cmh airflow capacity.
Applications:
1. STP & ETP air supply
2. Any air agitation
3. Ballon & Gloves testing
4. Printing
5. Spa Air Supply
6. Methane Air supply etc...
View Complete Details
Get Latest PriceRequest a quote
TrustSEAL Verified
Leading Supplier
Manufacturer
Company Video
View Mobile Number
79% Response RateContact Supplier
Product Details
Company Details
Product Specification
Power (W) | 0.37-15.5 kw |
Body Material | Aluminum |
Power | Standard |
Power Source | Electric Blower |
Pressure | High Pressure |
Brand | Cleantek |
Blower Type | Turbo Blower, Centrifugal Blower, Roots Blower |
Speed | Standard |
Temperature Range | 85 degree |
Pressure (Bar) | 750 mm of wg - 6500 mm of Wg |
Automation Grade | Automatic |
Weight (kg) | 10 - 250 kg |
Frequency (Hz) | 50 |
Speed (RPM) | 2880 |
Voltage (V) | 415 V |
Condition | New |
Country of Origin | Made in India |
Minimum Order Quantity | 1 Piece |
Product Description
Ring Blower:
The Cleantek Ring blower is a non-positive displacement, high volume, low pressure blower that can operate as either a compressor or a vacuum pump. It is also known by other names such as: regenerative blower, Turbine Blower, vortex blower and side-channel blower.
The blower consists of an diecast impeller mounted directly on a motor shaft and is rotated at a high speed, about 2880 RPM. On the periphery of the impeller is a large number of radial blades. The impeller is positioned between two endplates with the blades located with a channel on either side.
As the diecast impeller rotate and the blades pass the inlet port, a low pressure area is created that draws in air or other gases. The impeller blades impart motion to the air by centrifugal force, throwing it outward and forward, where it follows the contour of the side-channel and is returned to the base, or root, of the impeller. This action is repeated many times, creating a vortex. Each "regeneration" causes the air to gain pressure until it reaches the portion of the housing where the air is stripped from the impeller and discharged from the blower.
Cleantek manufacturing air agitation blower for Electroplating process, Metal coating process, Aquaculture , Etc Various airflow capacity and pressure mranges avilablee in our blowers.
leantek Manufacturing turbine blower in various airflow and pressure capacity.
This Turbine blower available is 2 different designs.
1. Single stage Turbine Blower
2. Double Stage Ring Blower
Our Turbine Blower models available in 45 cmh to 1500 cmh airflow capacity.
Applications:
1. STP & ETP air supply
2. Any air agitation
3. Ballon & Gloves testing
4. Printing
5. Spa Air Supply
6. Methane Air supply etc...
The Cleantek Ring blower is a non-positive displacement, high volume, low pressure blower that can operate as either a compressor or a vacuum pump. It is also known by other names such as: regenerative blower, Turbine Blower, vortex blower and side-channel blower.
The blower consists of an diecast impeller mounted directly on a motor shaft and is rotated at a high speed, about 2880 RPM. On the periphery of the impeller is a large number of radial blades. The impeller is positioned between two endplates with the blades located with a channel on either side.
As the diecast impeller rotate and the blades pass the inlet port, a low pressure area is created that draws in air or other gases. The impeller blades impart motion to the air by centrifugal force, throwing it outward and forward, where it follows the contour of the side-channel and is returned to the base, or root, of the impeller. This action is repeated many times, creating a vortex. Each "regeneration" causes the air to gain pressure until it reaches the portion of the housing where the air is stripped from the impeller and discharged from the blower.
Cleantek manufacturing air agitation blower for Electroplating process, Metal coating process, Aquaculture , Etc Various airflow capacity and pressure mranges avilablee in our blowers.
leantek Manufacturing turbine blower in various airflow and pressure capacity.
This Turbine blower available is 2 different designs.
1. Single stage Turbine Blower
2. Double Stage Ring Blower
Our Turbine Blower models available in 45 cmh to 1500 cmh airflow capacity.
Applications:
1. STP & ETP air supply
2. Any air agitation
3. Ballon & Gloves testing
4. Printing
5. Spa Air Supply
6. Methane Air supply etc...
Additional Information
Payment Terms | T/T (Bank Transfer) |
Interested in this product?Get Latest Price from the seller
Contact Seller
Product Video
About the Company
Year of Establishment2006
Legal Status of FirmIndividual - Proprietor
Nature of BusinessManufacturer
Number of Employees11 To 25 People
Annual TurnoverRs. 2 - 5 Crore
IndiaMART Member SinceAug 2006
GST33AMCPB0547M1ZD
Import Export Code (IEC)32060*****
Founded in the year 2006, we CLEANTEK are the Manufacturer, exporters of Paint Booth, Dust Collector, Mist Collector, Vacuum Loader, Centrifugal Blowers, Ring Blowers, Fume Extractor, Downdraft Table, downdraft Tanle, Vacuum Cleaner, Air Knife System, Vacuum Blowers and Oil Mist Collector. We are service provider of Fume Extractor AMC Service, Vacuum Motor Repair Service and Dust Collector Maintenance Service.
Cleantek design Team analyze the clients requirement and suggest the suitable models.
Cleantek design Team analyze the clients requirement and suggest the suitable models.
Company Video
Seller Contact Details
Krishna Moorthy
Site No. 22 & 23, Balaji Industrial Estate, Kondayampalayam Main Road, Saravanampatty Coimbatore - 641035, Tamil Nadu, India
Get DirectionsView Mobile No.
Send SMS
Send Email