ENAW-5083 Aluminium Plates & Sheets
Grade | 5000 Series |
Type | Coil, Plate |
Alloy Or Not | Is Alloy |
Condition | New |
Brand | Jayant Impex(JIPL), Imported (European Origin) |
Similar Specifications: BS N8, Alcan GB-B54S, Alcoa-505, BA 281, Hiduminium-05, Peraluman-460, Birmabright-BB4, QQ-A-200/4, QQ-A-250/6.
Size Specifications for Aluminium ENAW-5083 Plates & Sheets (5083 - O, 5083 - H111): 12mm to 100mm, 1/2" to 4"
The alloy composition of aluminium 5083:
Si: 0.4Fe: 0.4Cu: 0.1Mn: 0.4-1.0Mg: 4.0-4.9Zn: 0.25Ti: 0.15Cr: 0.05-0.25Al: BalanceApplications of Aluminium ENAW-5083 Plates & Sheets (5083 - O, 5083 - H111): Shipbuilding, Railroad cars, Drilling rigs, Coachwork, Pressure vessels Aluminum armor, Vehicle bodies, Tip truck bodies, Mine skips and cagesFrom Tradewell Ferromet Pvt Ltd, India, Maharashtra, Khopoli, Mumbai client can avail Aluminium ENAW-5083 Plates & Sheets (5083 - O, 5083 - H111), Aluminium 5083 Plate, Aluminium 5083 Sheet, Al Alloy 5083-O Plate, Aluminum 5083 – H111 Sheets, 5083 – H32 Aluminium Alloy Plate, Al 5083 – H32 Sheet, Al 5083 – H111 Plate.
Client can procure smaller quantities of 5083 Aluminium Alloy Plate & Sheet online ready stock from us at premium cost in any destination by just sending us an email.If any requirements for Aluminium ENAW-5083 Plates & Sheets (5083 - O, 5083 - H111), Aluminium 5083 Plate, Aluminium 5083 Sheet, Al Alloy 5083-O Plate, Aluminum 5083 – H111 Sheets, 5083 – H32 Aluminium Alloy Plate, Al 5083 – H32 Sheet, Al 5083 – H111 Plate kindly do contact us.Other possible products of Aluminum: Bar, Round Bar, Flat Bar, Square Bar, Round Corner Square Bar, RCS Bar, Straight Corner Square Bar, SCS Bar, Hexagonal Bar, Hex Bar, Hollow Bar, Forged Bar, Rolled Bar, Bright Bar, Machined Bar (Proof Machined), Tempered Bar, Blocks (Square, Rectangular), Shafting (Shafts), Plate, Sheet, Coil, Circle, Strip, Rings, Forged Ring, Rolled Ring, Seamless Ring, Welded Ring, Tube, Tubing, Pipe, Flange, Fitting, Fasteners, Stud, Bolt, Screws, Nut, Washer, Forgings, Machined Part, Welded Components, Welding Consumables, Filler Metal Wire Rod, Rods, Shims (Shim-Sheets), Wires, Angle, Channel, I-Beam, Pipe, Perforated Sheet, Expanded Sheet, Textured Sheet, Tread (Diamond Plate) Sheet, T-Bar, Threaded Rod, Rectangle Tube, Round Tube, Square Tube, Rectangular Pipe, Round Pipe, Square Pipe
Exports To: Saudi Arabia | Kenya | Mexico | Zambia | Sri Lanka
Tradewell Ferromet Private Limited
Product Details
Company Details
Product Specification
Grade | 5000 Series |
Type | Coil, Plate |
Alloy Or Not | Is Alloy |
Condition | New |
Brand | Jayant Impex(JIPL), Imported (European Origin) |
Third Party Inspection (TPI) | Allowed. Charges to be borne by buyer. |
Payment Terms | 100% Advance Against Proforma Invoice. Sorry no credits |
Test Certificate | NABL Government approved laboratory reports can be provided. |
Material Grade | ENAW-5083 |
Certification Of Conformity (COC) | NACE MR0175 Certificate can be provided with an extra cost of testing & sample charges. |
Certificate Of Origin (COO) | Certified COO by Indian Chamber's Of Commerce can be provided for Indian Origin items. |
Minimum Order Quantity | 1000 Kg |
Product Description
Tradewell Ferromet can offer Aluminium ENAW-5083 Plates & Sheets (5083 - O, 5083 - H111), Aluminium 5083 Plate, Aluminium 5083 Sheet, Al Alloy 5083-O Plate, Aluminum 5083 – H111 Sheets, 5083 – H32 Aluminium Alloy Plate, Al 5083 – H32 Sheet, Al 5083 – H111 Plate.
Similar Specifications:
BS N8, Alcan GB-B54S, Alcoa-505, BA 281, Hiduminium-05, Peraluman-460, Birmabright-BB4, QQ-A-200/4, QQ-A-250/6.
Size Specifications for Aluminium ENAW-5083 Plates & Sheets (5083 - O, 5083 - H111): 12mm to 100mm, 1/2" to 4"
The alloy composition of aluminium 5083:
Si: 0.4
Fe: 0.4
Cu: 0.1
Mn: 0.4-1.0
Mg: 4.0-4.9
Zn: 0.25
Ti: 0.15
Cr: 0.05-0.25
Al: Balance
Applications of Aluminium ENAW-5083 Plates & Sheets (5083 - O, 5083 - H111): Shipbuilding, Railroad cars, Drilling rigs, Coachwork, Pressure vessels Aluminum armor, Vehicle bodies, Tip truck bodies, Mine skips and cages
From Tradewell Ferromet Pvt Ltd, India, Maharashtra, Khopoli, Mumbai client can avail Aluminium ENAW-5083 Plates & Sheets (5083 - O, 5083 - H111), Aluminium 5083 Plate, Aluminium 5083 Sheet, Al Alloy 5083-O Plate, Aluminum 5083 – H111 Sheets, 5083 – H32 Aluminium Alloy Plate, Al 5083 – H32 Sheet, Al 5083 – H111 Plate.
Client can procure smaller quantities of 5083 Aluminium Alloy Plate & Sheet online ready stock from us at premium cost in any destination by just sending us an email.
If any requirements for Aluminium ENAW-5083 Plates & Sheets (5083 - O, 5083 - H111), Aluminium 5083 Plate, Aluminium 5083 Sheet, Al Alloy 5083-O Plate, Aluminum 5083 – H111 Sheets, 5083 – H32 Aluminium Alloy Plate, Al 5083 – H32 Sheet, Al 5083 – H111 Plate kindly do contact us.
Other possible products of Aluminum:
Bar, Round Bar, Flat Bar, Square Bar, Round Corner Square Bar, RCS Bar, Straight Corner Square Bar, SCS Bar, Hexagonal Bar, Hex Bar, Hollow Bar, Forged Bar, Rolled Bar, Bright Bar, Machined Bar (Proof Machined), Tempered Bar, Blocks (Square, Rectangular), Shafting (Shafts), Plate, Sheet, Coil, Circle, Strip, Rings, Forged Ring, Rolled Ring, Seamless Ring, Welded Ring, Tube, Tubing, Pipe, Flange, Fitting, Fasteners, Stud, Bolt, Screws, Nut, Washer, Forgings, Machined Part, Welded Components, Welding Consumables, Filler Metal Wire Rod, Rods, Shims (Shim-Sheets), Wires, Angle, Channel, I-Beam, Pipe, Perforated Sheet, Expanded Sheet, Textured Sheet, Tread (Diamond Plate) Sheet, T-Bar, Threaded Rod, Rectangle Tube, Round Tube, Square Tube, Rectangular Pipe, Round Pipe, Square PipeAdditional Information
Item Code | aluminium-enaw-5083-plates-sheets-5083-o-5083-h111 |
Delivery Time | Immediate (If Ready Stock). 3-8 weeks for make to order basis depending on raw material availability |
Port Of Dispatch | Nhavasheva, Maharashtra, Khopoli, Mumbai, India |
Packaging Details | Wooden Box, Pallets or as per client's request |
About the Company
Tradewell Ferromet Pvt. Ltd. is actively engaged in supplies of quality products in grades of STAINLESS STEEL, DUPLEX STEEL, ALLOY STEEL, TOOL STEEL, CARBON STEEL and HIGH NICKEL ALLOYS.
Our Products Range Consists:
Flanges - Slip-On, Blind, Weld Neck, Long Weld Neck, Lap Joint, Socket Weld, Threaded, Spectacle Blind.
Bars - Round Bars, Hexagonal Bars, Square Bars, Rectangular Bars, Flat Bars & Hollow Bars.
Pipes & Tubes - Seamless & Welded (ERW, EFW, SAW, LSAW, SPIRAL).
Pipe Fittings - Butt Weld, Socket Weld, Screwed & Forged Fittings (Elbow, Reducer, Tee, Cap, Nipple, Coupling).
STANDARDS: ASTM, ASME, API, ANSI, BS, DIN, JIS, ISO
Fasteners – Studs, Nuts, Washers, Bolts & Screws.
STANDARDS: DIN / ISO / EN / IS / ASME can be offer as both Metric & Imperial Inch sizes
Other Products - Rings, Circles, Sheets & Plates , Angles & Channels
Our company is associated with many Indian Manufacturing units. This is one of the reasons that we serve quality product with fastest possible delivery being most competitive.
Our AIM is to satisfy the customer with quality & service as per their requirement and thus have a lifelong association.
Major grades which we SPECIALIZE in are as follows :
PIPES, TUBINGS, PIPE FITTINGS & FLANGES
CARBON STEEL: ASTM A 106 GR. A, B & C, ASTM A 350 LF1, LF2 and LF3, API 5L GR. B, A333 GR 6, X42, X52, IS 1239, IS 3589
ALLOY STEEL: ASTM A519 4130/AISI 4130, AISI 4140, AISI 4340, ASTM A335 GR. P5, P9, P11, P22, P91, ASTM A213 T5,T9,T11,T12,T22,T91, ASTM A182 F5,F9,F11,F12,F22,F91, EN19, EN24
STAINLESS STEEL: ASTM A 182 F304/L, 316/L, 304H, 321/H, 347/H, 904L, ASTM A 182 F309, F310, F310s, F310H
DUPLEX STEEL: UNS S31803, S32205, S32750, S32760, ASTM A694 F51, F52, F53, F54, F57, F59, F60, F61.
OTHER STEELS: Cupro Nickel Alloys 70/30 – 90/10, 15-5Ph , 17-4Ph (AISI 630), Titanium grades 1 upto 11, Alloy 20 / WP20CB, Nickel 200 , 201 (UNS No. 02200 and UNS No. 02201), Alloy 400 (UNS No. 04400 - Monel), Alloy C276, B2, C4, G30 (UNS No. 01276, UNS No. 10665 - Hastelloy), Alloy 600, 625, 601, 718 (UNS No. 06600, UNS No. 06625 – Inconel), Alloy 800 H/T , 825 (UNS No. 08800, UNS No. 08825 - Incolloy)
ADDITIONAL GRADES FOR FASTENERS
CARBON STEEL: Grade 5, 8.8, 12.9
STAINLESS STEEL: 303, 304, 304L, 309, 309H, 309S, 310, 310S, 310H, 316, 316H, 316L, 316Ti, 317, 317L, 321, 321H, 347, 347H, 409, 409L, 410, 416, 419, 420, 421, 429, 430F, 446C
PRECIPITATION HARDENING STEEL: 13-8pH, 15-4pH, 17-4pH & 17-7 pH.
DUPLEX STEEL: S31803, S32205, S32750, S32760, F51, F52, F53, F54, F57, F59, F60, F61, Ferralium Alloy 255
NICKEL ALLOY: Inconel 600, Inconel 601, Inconel 625, Inconel 718, etc.
OTHER STEELS: Monel 400 , Monel K500, Hastelloy B2, Hastelloy C22, Hastelloy C276, Nitronic 50, Nitronic 60, Nitronic 75, Copper Nickel 70/30, Copper Nickel 90/10, Aluminum Bronze, Phosphor Bronze, Silicon Bronze, Titanium Alloy 2, 5, 7
ADDITIONAL GRADES FOR BARS, RINGS, CIRCLES, SHEETS & PLATES, ANGLES & CHANNELS.
TOOL STEEL: H11, H13, DIN 1.2714, DIN 1.2343, DIN 1.2344, DIN 1.2379, SKD60, SKD61
Other grades not listed above can also be provided on make to order basis.
Any requirements from any of the listed products do not hesitate to contact us.
Seller Contact Details
Shop No. 6, Ground Floor, Mahimwala Building, Grant Road Mumbai - 400004, Maharashtra, India
Get Directions