Engine Car Seat Cylinder Head Services

Get Latest Price

Engine Car Seat Cylinder Head Cylinder heads (commonly just called “heads) are the big piece of metal which caps and seals the end of the cylinder bore. Types of Cylinder Heads: There are three basic types of cylinder heads:
- Flathead Cylinder Head – These cylinder heads were used on older engines such as the flat-head Ford engines (like seen below). The oval protrusion at the top of the cylinder head is for coolant flow. Coolant would flow up from the block and through passages in the head (between bolt holes) and out through this oval port at the top.
Overhead Valve Head (OHV) – This type of cylinder head has been used extensively from the 1950s and are still used today. These heads have the valves located within them instead of in the block like the flathead. The valves are actuated indirectly from the cam through a valve train, which usually consists of lifters (tappets), push rods, and rocker arms. An OHV head usually looks something like these Chevrolet heads below. In the picture, the flat surface of the head (right side of the image) is the portion which faces the engine block. The left side is where you see the valve tips, valve springs, retainers, and keepers. On top of these is where you would see the rocker arms if they were installed.

View Complete Details
Get Latest PriceRequest a quote

SRK Automation System

Vitthal Nagar, Pune, Maharashtra
GST- 27ACQFS4146P1Z8
View Mobile Number
Call +91-8068442285
Dial Ext 857 when connected
Verified Supplier
Manufacturer
Contact Supplier

Product Description

Engine Car Seat Cylinder Head

Cylinder heads (commonly just called “heads”) are the big piece of metal which caps and seals the end of the cylinder bore.

Types of Cylinder Heads:

There are three basic types of cylinder heads:

  • Flathead Cylinder Head – These cylinder heads were used on older engines such as the flat-head Ford engines (like seen below). The oval protrusion at the top of the cylinder head is for coolant flow. Coolant would flow up from the block and through passages in the head (between bolt holes) and out through this oval port at the top.

Overhead Valve Head (OHV) – This type of cylinder head has been used extensively from the 1950s and are still used today. These heads have the valves located within them instead of in the block like the flathead. The valves are actuated indirectly from the cam through a valve train, which usually consists of lifters (tappets), push rods, and rocker arms. An OHV head usually looks something like these Chevrolet heads below. In the picture, the flat surface of the head (right side of the image) is the portion which faces the engine block. The left side is where you see the valve tips, valve springs, retainers, and keepers. On top of these is where you would see the rocker arms if they were installed.


Interested in this service?Get Latest Price from the seller
Contact Seller

Product Image

Engine Car Seat Cylinder Head Services

About the Company

Legal Status of FirmPartnership Firm
Nature of BusinessManufacturer
IndiaMART Member SinceOct 2015
GST27ACQFS4146P1Z8
Send your enquiry to this supplier
I agree to the terms and privacy policy

Seller Contact Details

Ravindra Patil

Samarath Krupa Appt.,Sr.no 18/1 No.110,Ward No 2,4N981,Hingane Khurd,Shingad Road
Vitthal Nagar
Pune - 411051, Maharashtra, India

View Mobile No.
Call +91-8068442285 Dial Ext 857 when connected
Send SMS
Send Email
Save time! Get Best Deal
Tell us what you
need
Receive seller
details
Seal the deal
Pay with IndiaMART
Save time! Get Best Deal
I agree to the terms and privacy policy
X
Hi
I agree to the terms and privacy policy
Verifying...
1

Have a requirement?
Get Best Price

Hi
I agree to the terms and privacy policy
Verifying...
1

Have a requirement?
Get Best Price