TrueValue Exterior Latex Utility Paint
Types | Tintable Primer, Alkyd Primer, Bonding Primer, Acrylic Primer, Paint And Primer in One Concept |
Color | Red, Orange, Green, Blue, Black, Multi Colour |
Brand | TrueValue |
State/Form | Liquid |
Packaging Size (ex. 1L or 1Kg) | 18.9 L (5 Gallon) |
DESCRIPTION: Our Good Quality interior/exterior latex flat Professional Eco-Friendly Coatings.Product
Features: •Good Quality•Easy soap and water clean-up•Dries quickly COLORS AND TINTING:ACP-20 White (may be tinted with up to 2oz. of universal colorant per gallon) RECOMMENDED USE: Previously painted or properly prepared and primed interior surfaces. THINNING AND DRY TIME: Thin sparingly with water if necessary for spraying. Dries in 30 minutes. Recoat if necessary after 2 hours. High humidity or low temperature may increase dry time. COVERAGE: 250-400 sq.ft. per gallon depending on the porosity of the surface to be painted. CLEAN UP: CLEAN UP Wash tools with warm water and soap immediately after applying. Properly Dispose of all soiled rags. To recycle or properly dispose of paint in your community. STORAGE: Do not expose this product to excessive heat. Close container after each use. Keep from freezing. APPLICATION METHODS: Average coverage is about 250-400 sq.ft. per gallon depending on the porosity of the surface to be painted. Do not apply over a surface that has not been thoroughly prepared. Mix thoroughly before using and stir occasionally during application. Intermix all containers for color uniformity. Use a premium brush, roller or pad applicator. May be spray applied. Do not over spread. For best performance; apply two coats on new surfaces after priming..Surface Prep:•Inadequate surface prep accounts for about 90% of all paint failures•The surface must be free of dust, dirt, chalk and grime•Damaged wood must be repaired or replaced.•Cracks, gaps and holes can be filled with spackle or drywall compound ACP-20 FORMULA ANALYSIS -700RESIN TYPE: Vinyl AcrylicSheen/Type Finish:0-3 @60°/ FlatWeight per Gallon = 11.41 lbs.Percent Solids by Weight = 46.59 %Percent Solids by volume = 27.90 %Viscosity Range = 94-98 KUV.O.C. = Less than 50 g/L
Product Details
Company Details
Product Specification
Types | Tintable Primer, Alkyd Primer, Bonding Primer, Acrylic Primer, Paint And Primer in One Concept |
Color | Red, Orange, Green, Blue, Black, Multi Colour |
Brand | TrueValue |
State/Form | Liquid |
Packaging Size (ex. 1L or 1Kg) | 18.9 L (5 Gallon) |
Category | Latex Based |
Surface of Application | Interior/Exterior Wall |
Application | Decorative & Craft, General Purpose, Interior/Exterior Wall |
Sheen Type | Flat Enamel, Natural Satin, High Gloss, Semi Gloss |
Types Of Exterior Wall Paint | Emulsions, Cement Paints, Water Based Paint |
Minimum Order Quantity | 1 Unit |
Product Description
A USA Made Professional Coatings™ 700 Interior/Exterior Latex Flat Utility Paint, Good Painters Quality, White Base(For Light Colors), 1 Gallon
DESCRIPTION:
Our Good Quality interior/exterior latex flat Professional Eco-Friendly Coatings.
Product Features:
•Good Quality
•Easy soap and water clean-up
•Dries quickly
COLORS AND TINTING:
ACP-20 White (may be tinted with up to 2oz. of universal colorant per gallon)
RECOMMENDED USE: Previously painted or properly prepared and primed interior surfaces. THINNING AND DRY TIME: Thin sparingly with water if necessary for spraying. Dries in 30 minutes. Recoat if necessary after 2 hours. High humidity or low temperature may increase dry time. COVERAGE: 250-400 sq.ft. per gallon depending on the porosity of the surface to be painted. CLEAN UP: CLEAN UP Wash tools with warm water and soap immediately after applying. Properly Dispose of all soiled rags. To recycle or properly dispose of paint in your community. STORAGE: Do not expose this product to excessive heat. Close container after each use. Keep from freezing.
APPLICATION METHODS: Average coverage is about 250-400 sq.ft. per gallon depending on the porosity of the surface to be painted. Do not apply over a surface that has not been thoroughly prepared. Mix thoroughly before using and stir occasionally during application. Intermix all containers for color uniformity. Use a premium brush, roller or pad applicator. May be spray applied. Do not over spread. For best performance; apply two coats on new surfaces after priming.
.
Surface Prep:
•Inadequate surface prep accounts for about 90% of all paint failures
•The surface must be free of dust, dirt, chalk and grime
•Damaged wood must be repaired or replaced.
•Cracks, gaps and holes can be filled with spackle or drywall compound
ACP-20 FORMULA ANALYSIS -700
RESIN TYPE: Vinyl Acrylic
Sheen/Type Finish:
0-3 @60°/ Flat
Weight per Gallon = 11.41 lbs.
Percent Solids by Weight = 46.59 %
Percent Solids by volume = 27.90 %
Viscosity Range = 94-98 KU
V.O.C. = Less than 50 g/L
Additional Information
Item Code | 042909028198 |
Delivery Time | 3-7 Days |
Port Of Dispatch | Chennai |
Payment Terms | T/T (Bank Transfer) |
About the Company
Established in the year 2014 at Chennai, Tamil Nadu, we “Raa Hardwares & Automation Private Limited”, engaged as the trader of Interior Paint,Exterior Paint,Wall Paint,Spray Paint,Oscillating Sprinkler and many more.These products are stringently examined on numerous quality parameters before final dispatch. Also, these products are offered by us at competitive prices.