Kimplas Female and Female Ball Valve are designed to use with threaded PVC and metal pipes. Kimplas PVC Ball Valves fittings are ideally suited for connecting drip and Sprinkler Irrigation Piping networks. The Valves are recommended for Cold Water Services within temperature range of 0°C to 40°C. For exact recommendations on use and applications, refer Kimplas Technical Specifications Manual.
Pipe compatibity- Threaded PVC and Metal pipes
Dimensions. Features & Functional Tests: ISO:3501. ISO:3503, 150:3459
Threading: 1S:554, DIN:2999
Complies with 150:1452-Part 4
PVC and Metal pipe connection during laying
For connecting drip Irrigation mains and sub-mains
Pipe connecting Sprinkler Irrigation mains and sub-mains
Joint preparation must be done as specified in the installation instructions. Complete Installation Manual may be downloaded. Female-Female Threaded Valve: Pipe ends must be cut square and burr-free before using with the valve. The metal pipes should be threaded with BSPT male t female threading of the required size viz. 1/2", 3/4 or 1" as the case may be. To instal the valve, there is no need to fully open the nut and other components of the valve. To instal the valve, just screw-on the smaller end of the valve first on to Male Threading on the pipe or fitting. Loosen the nut on the valve body at the other end by half turn. Screw-on the other end of the valve on the pipe or screw-on the pipe into the valve. Then tighten the threaded nut by hands only. The nut should be closed tightly. Use sealant tape (Teflon or Plumber''s tape) on male threads on valve & pipe.
Plastic & rubber materials conform to the Standard requirements for use with irrigation water
The Body & nut made up of PVC with its sturdy design holds the pipe-fitting assembly intact with continuous working pressures upto 16 Bars
The grip ring made up of POM prevents the pipe being puled out from the filling.
The PP (Packing Pressure) Bush exerts thrust on the rubber ''0''-Ring / Gasket, compresses on pipe and fitting body to ensure leak-tightness
Rubber ''0''-Ring / Gasket prevent leakage under internal pressure as wet as under external pressure as in case of vacuum and/or suction.
Resistant to a wide range of chemicals
Higher penetration of pipe in fittings enables proper alignment.
Full bore cross sections for higher flows
Permanent Batch Indicator, Size, PN rating and Raw Material Grade marking for ease of traceability
Compact but sturdy design for ease of installation and trouble free service.
About the Company
Year of Establishment1996
Legal Status of FirmLimited Company (Ltd./Pvt.Ltd.)
Nature of BusinessManufacturer
Number of Employees101 to 500 People
Annual TurnoverRs. 50 - 100 Crore
IndiaMART Member SinceJul 2014
Kimplas Piping Systems Ltd. was established in Nashik,India in the year 1996 to produce Electrofusion (EF) Fittings for use in Gas and Water Distribution Systems and Industrial Applications. It has a “Pioneer Manufacturer” status in India for production of EF Fittings as it was the first to manufacture and introduce EF Fittings in India. By now it has supplied millions of fittings since 1997. It has successfully introduced EF Fittings in Drinking Water Systems and is today the Market Leader in India both in the Gas and Water Segments for EF and Compression Fittings.