Flash And Fire Point Apparatus

- Flash Point is Lowest temperature at which application of the ignition source causes the vapour of a specimen of the sample to ignite under the specified condition of the test. The temperature of the approximately 70 ml test specimen is increased rapidly at first and then at a slower constant rate as the flash point is approached. At specified intervals a test flame is passed across the cup, to measure the tendency of the test specimen to form a flammable mixture with air under controlled laboratory conditions. STANDARD :- Conforms to the specifications of: ASTM D92; IP 36; ISO 2592 FEATURES & BENEFITS :- 1) Temp.Range: 79 to 400° deg C. 2) Test Method : ISO 2592 , ASTM D 92 , IP 36 , IS 1448 ( P-69). 3) Ignition Source : Crank Mechanisam spring loaded with manual handling. 4) Temperature Sensor : Thermometer . 5) Flash/Fire Detector: Manual / Visual flash detection. 6) Controller: Energy regulator manual type. 7) Flame-Sampling Arrangement: By Hand. 8) Heater: 800 W, 230 v. 9) Equipment Overall Size (LxWxH): 175mm (W) X 200mm ( D ) X 275 mm ( H ) 10) Equipment Gross Weight: 8 Kg. 11) Equipment supply will be 230 V Ac , 50 Hz with 6 amp capacity.ACCESSORIES WILL BE SUPPLID WITH EQUIPMENT :- 1) COC CUP -- 1 NO (CAT NO HAMCO19AC1) 2) THERMOMETER COLLAR – 1 NO ( CAT NO HAMCO19AC2) 3) THERMOMETER ASTM 11C – 1 NO (CAT NO HAMCO19AC3) SPARES REQUIRED FOR 5 YEAR TROUBLE FREE OPERATION :- 1) CERAMIC HEATER -- 2 NOS.(CAT NO HAMCO19S1) 2) COC CUP -- 2 NO.(CAT NO HAMCO19AC1) 3) THERMOMETER ASTM 11C – 1 NO (CAT NO HAMCO19AC3) ELECTRICAL REQUIREMENT –  220-240V, 50/60Hz, Single Phase, 5.9A  OR 115V, 50/60Hz, Single Phase, 11.8A DIMENSION :- Ixwxh,in.(cm) 7"x8"x11" (18x20x28) Net Weight: 18 lbs (8kg) SHIPPING INFORMATION :- Shipping Weight: 33 lbs (15kg) Dimensions: 1.75 Cu. ft.