Wallmaax Floorex is a premium blended PU based special emulsion paint
to protect and beautify your exterior floor tiles. It is suitable for
the cement tiles fixed to driveways, walk ways, terrace and for any
plain cement surface. It protects your exterior floor tiles from sun,
rain and algae and fungal attack and gives your tiles a superior glossy
finish.
Scratch Resistant
Glossy Finish
Water and Fungal Resistant
Composition
Pigments Titanium Dioxide High Performance Additives, High Quality Mineral Extenders Binder Styrene Acrylic Dilution 20-30% by volume with clean potable waterProperties
Colours Brilliant White & Base Texture Rich Matt Finish Touch dry 30 Minutes Hard dry 8 hrs. Washability 2 Weeks. Recoating Time 2 3 hrs Coverage 50-70 sqft / kg in 2 coats. (Coverage depends on the substrate condition) Application Method Brushing, Rolling or Spraying Pack Size 1 Kg, 2 Kg, 5 Kg, 10 Kg & 20 KgApplication System
Wash the surface vigorously with water jet to remove all foreign materials.
Scrape off old paints.
Do patching using cement, sand mixture.
Allow to dry.
Apply
Wallmaax Floorex by any of the following methods. Brush, spray and
sponge. Under normal conditions no thinning is required. In case
thinning is required, a maximum quantity of 10% of pure water can be
added.
Single coat is normally sufficient where there is no color change.
If there is a color change, apply second coat giving an interval of minimum 2 hrs per coat.
