Fosroc Nitobond EP Hardener, 5 L

We have carved a niche amongst the most dominant names in this domain, involved in providing a superior quality range of Fosroc Nitobond EP Hardener.
Uses: For bonding fresh wet cementitious materials to existing cementitious surfaces. For use on horizontal surfaces or on vertical surfaces where mortar or concrete can be supported by formwork. The long ‘open’ life makes it suitable for use with formwork or where additional steel reinforcement has to be fitted. The product is ideal for roads, bridges, pavements, loading bays and factories, and for bonded or granolithic floor toppings. Nitobond EP is equally suited to internal and external applications.
Advantages: Nitobond EP may also be used as part of a repair system where a substrate/repair barrier is required or where the substrate is likely to remain permanently damp or wet.Can be applied on to dry or damp substratesExhibits high mechanical strengthPositive adhesion - exceeds that of the tensile strength of the host concreteSlow cure allows time to erect steel reinforcement and formworkSolvent-free - can be used in enclosed locations
Description: Nitobond EP is based on solvent-free epoxy resins containing pigments and fine fillers. It is supplied as a two-component material in pre-weighed quantities ready for on-site mixing and use. The ‘base’ component is white and the ‘hardener’ component is green, providing visual evidence that adequate mixing has been achieved. (Nitobond EPFS, suitable for cold weather working, can be made available when specifically requested.)
Standards compliance: ASTM C881: Type II, grade 2 class C.
Specification: Epoxy bonding agent The bonding agent shall be Nitobond EP, a two-component solvent-free epoxy resin. The two components shall be differentially pigmented in order to ensure visually that correct mixing has taken place prior to the application.
Properties