Gaurang 10.42 kg/m weight square hollow section

Gaurang Hollow Sections - Superior is a word that falls short when it comes to quality
Gaurang markets its product under the brand Gaurang (India) & GPL which covers MS Black, G.I. Round pipes and Hollow Sections both in Rectangular and Square Quality rolled on High Frequency Induct weld HFIW mills.
Structural Par Excellence
International quality raw material
Enhanced physical strenght provides decisive advantage
Formed at modern HFIW mil under strict quality control
Unique Strength & Economy
Increased tensile capacity because of concentric connection.
Increased compressive strenght because of higher radius of gyration.
Full strenght under bending moment due to superior torsional rigidity
Enhanced shear capacity.
Multi fold tensional capacity.
Lower wind drag
Better fire resistance
The best during earthquakes
Cost Benefit
The Hollow Sections are perfect substitute for conventional single and channel and the market is diversifying to adopt the sections for the reason of overall cost saving of 15%.In addition to this, the maintenance of these sections is very cheap and it has a better aestheticlook.
The thickness mentioned in the table is as per IS 4923/1997 Standard. Other Thicknesses can also be made starting form 0.6 mm to 10 mm based on discussion with the customer requirements.
Features
The following tolerances shall be permitted on Hollow section
- Thickness - +-10%
- Outside Dimension of sides With a minimum of - 1% To +-0.5mm
Weight
* On individual lengths - +10% To -8%
* On lots of 10 tonne - +-7.5%
* Squareness of Corner - 90 Degree To +-02 Degree
* Radius of Corner outside R=3T Max, where T is the thickness of the section.