Globe Valves Series CMI
STANDARDS
Bonetti’s “CMI valves have been designed, rated, manufactured and inspected, where applicable, in accordancewith most widely used international Standards, namely:- ASME B16.34 "Steel valves, Flanged and Butt welding Ends"- ASME B16.10 "Face-to-Face and End-to-End Dimensions"- Applicable Sections of ASME Boiler and Pressure VesselCode, including Nuclear Section III- MSS SP 44 "Steel pipe line flanges”- MSS SP 61 "Hydrostatic testing of steel valves”- API Standard 598 "Valve inspection and test”- ASME B16.25 "Butt welding ends"CONNECTIONSBonetti’s “CMI” valves illustrated in this catalogue have thefollowingpipe connections:- Flanged ends according to ASME B16.5 (usually for Class600 only, not for higher pressure Classes) or to differentStandards;- Butt weld ends in accordance to ASME B16.25. (See pages30 and 31 for different standards.).We can supply valves with connections as needed.OPERATIONSBonetti’s “CMI” valves described in this catalogue perform thefollowing functions:- Stop on-off shut off to fluid flow;- Stop and throttle - when a parabolic shaped disk is used inlieu of a standard stop disk. A linear flow control characteristicis achieved as a direct function of the stem turns;- Stop check - both a stop and a non-return valve;- Piston lift check - for automatic prevention of undesiredreverse flow.
Product Details
Company Details
Product Description
STANDARDS
Bonetti's "CMI" valves have been designed, rated,
manufactured and inspected, where applicable, in accordance
with most widely used international Standards, namely:
- ASME B16.34 "Steel valves, Flanged and Butt welding Ends"
- ASME B16.10 "Face-to-Face and End-to-End Dimensions"
- Applicable Sections of ASME Boiler and Pressure Vessel
Code, including Nuclear Section III
- MSS SP 44 "Steel pipe line flanges"
- MSS SP 61 "Hydrostatic testing of steel valves"
- API Standard 598 "Valve inspection and test"
- ASME B16.25 "Butt welding ends"
CONNECTIONS
Bonetti's "CMI" valves illustrated in this catalogue have the
following
pipe connections:
- Flanged ends according to ASME B16.5 (usually for Class
600 only, not for higher pressure Classes) or to different
Standards;
- Butt weld ends in accordance to ASME B16.25. (See pages
30 and 31 for different standards.).
We can supply valves with connections as needed.
OPERATIONS
Bonetti's "CMI" valves described in this catalogue perform the
following functions:
- Stop on-off shut off to fluid flow;
- Stop and throttle - when a parabolic shaped disk is used in
lieu of a standard stop disk. A linear flow control characteristic
is achieved as a direct function of the stem turns;
- Stop check - both a stop and a non-return valve;
- Piston lift check - for automatic prevention of undesired
reverse flow.
About the Company
Seller Contact Details
No. 21, Madhav Estate, Behind Safari Hotel, S. P. Ring Road, Odhav Ahmedabad - 382415, Gujarat, India
Get Directions