Home > Pumps, Pumping Machines & Spares > Water Pumps > Groundwater Pumps
Groundwater: Wells
mark as favourite

Groundwater: Wells

Get Latest Price
There's a good chance that the average Joe who had to dig a well in ancient Egypt probably did the work with his hands, a shovel, and a bucket. He would have kept digging until he reached the water table and water filled the bottom of the hole. Some wells are still dug by hand today, but more modern methods are available. It's still a dirty job, though!...
View ContactCall Seller Now
Call 09443338359Send a quick message
Get Best PriceRequest a quote
Share via

N. K. Samy Borewells

Tiruchengode, Namakkal, Tamil Nadu
Service Provider

Product Details

Product Description


There's a good chance that the average Joe who had to dig a well in ancient Egypt probably did the work with his hands, a shovel, and a bucket. He would have kept digging until he reached the water table and water filled the bottom of the hole. Some wells are still dug by hand today, but more modern methods are available. It's still a dirty job, though!
        Wells are extremely important to all societies. In many places wells provide a reliable and ample supply of water for home uses, irrigation, and industries. Where surface water is scarce, such as in deserts,people couldn't survive and thrive without ground water.
Types of wells        Digging a well by hand is becoming outdated today (would YOU want to do it?). Modern wells are more often drilled by a truck-mounted drill rig. Still, there are many ways to put in a well -- here are some of the common methods.
Dug wells        Hacking at the ground with a pick and shovel is one way to dig a well. If the ground is soft and the water table is shallow,then dug wells can work. Historically, dug wells were excavated by hand shovel to below the water table until incoming water exceeded the digger's bailing rate . The well was lined with stones, brick, tile, or other material to prevent collapse, and was covered with a cap of wood, stone, or concrete. They cannot be dug much deeper than the water table -- just as you cannot dig a hole very deep when you are at the beach... it keeps filling up with water!
Driven wells        Driven wells are still common today. They are built by driving a small-diameter pipe into soft earth, such as sand or gravel. A screen is usually attached to the bottom of the pipe to filter out sand and other particles. Problems? They can only tap shallow water, and because the source of the water is so close to the surface, contamination from surface pollutants can occur.
Drilled wells        Most modern wells are drilled, which requires a fairly complicated and expensive drill rig. Drill rigs are often mounted on big trucks. They use rotary drill bits that chew away at the rock, percussion bits that smash the rock, or, if the ground is soft,large auger bits. Drilled wells can be drilled more than 1,000 feet deep. Often a pump is placed at the bottom to push water up to the surface.
Water Levels in Wells        Ground-water users would find life easier if the water level in the aquifer that supplied their well always stayed the same. Seasonal variations in rainfall and the occasional drought affect the "height" of the underground water level. If a well is pumped at a faster rate than the aquifer around it is recharged by precipitation or other underground flow, then water levels around the well can be lowered. The water level in a well can also be lowered if other wells near it are withdrawing too much water. When water levels drop below the levels of the pump intakes, then wells will begin to pump air - they will "go dry."

Product Image

Groundwater: Wells

Company Details


About us

Nature of BusinessService Provider
IndiaMART Member SinceDec 2013
We, N.K.Samy Borewells are recognized as reputed Drilling Contractor for offering reliable and result oriented Borewell Service, Water Borewell Service, Borewell Consultant Service, Water Well Drilling Service, . A well-known Borewell Consultant has highly trained experts who successfully execute highly advanced technique to provide Borewell Drilling service to customers at very reasonable prices.
Right from the beginning N.K.Samy Borewells started its operation by Pneumatic Rig to the latest High-pressure, Super fast, Hydraulic Rig both on surface and in well by 4 ½ ", 6", 6 ½ ", 8", 10"& 12" bore wells. 4 ½ " Tube wells were drilled in open wells.6 ½ " The 8", 10", 12" are dug in Tiruchengode. Our uniqueness of timely delivery and on sight quality service allows us to leverages local competencies.
N.K.Samy Borewells are leading Drilling Contractor engaged in drilling Bore wells, Tube wells, Test bore holes & Diamond drilling. We have specialization in drilling 4 ½ " , 6" & 6 ½” bore wells with super fast Hydraulic Auto-Loader Rigs, 6 to 12 inches dia tube wells & filter point wells with Rotary & Calyx drills, which are performed by skilled professionals. We also have experienced Water Diviners & qualified Geologists who offer reliable Drilling Services to the customers. Our Borewell Consultant services are available at very cost-effective prices.
Tell Us What Are You Looking For?
I agree to the terms and privacy policy

Get in Touch with us

K Manoj

Sub Anpha Balaam No.4 Sankari Main Road
Tiruchengode
Namakkal - 637211 Tamil Nadu, India

View Mobile No.
09443338359
Send SMS
Send Email
Tell us what you
need
Receive seller
details
Seal the deal
Save time! Get Best Deal
I agree to the terms and privacy policy



How it Works
Tell us what you need by filling in the form
Receive Verified supplier details
Compare Quotations and seal the deal
X
I agree to the terms and privacy policy
Get Best Price
Hi
I agree to the terms and privacy policy